Linux Kernel

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeo ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout When the sco connection is established and then, the sco socket is releasing, timeout_work will be scheduled to judge whether the sco disconnection is timeout. The sock will be deallocated later, but it is dereferenced again in sco_sock_timeout. As a result, the use-after-free bugs will happen. The root cause is shown below: Cleanup Thread | Worker Thread sco_sock_release | sco_sock_close | __sco_sock_close | sco_sock_set_timer | schedule_delayed_work | sco_sock_kill | (wait a time) sock_put(sk) //FREE | sco_sock_timeout | sock_hold(sk) //USE The KASAN report triggered by POC is shown below: [ 95.890016] ================================================================== [ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0 [ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7 ... [ 95.890755] Workqueue: events sco_sock_timeout [ 95.890755] Call Trace: [ 95.890755] <TASK> [ 95.890755] dump_stack_lvl+0x45/0x110 [ 95.890755] print_address_description+0x78/0x390 [ 95.890755] print_report+0x11b/0x250 [ 95.890755] ? __virt_addr_valid+0xbe/0xf0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_report+0x139/0x170 [ 95.890755] ? update_load_avg+0xe5/0x9f0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_check_range+0x2c3/0x2e0 [ 95.890755] sco_sock_timeout+0x5e/0x1c0 [ 95.890755] process_one_work+0x561/0xc50 [ 95.890755] worker_thread+0xab2/0x13c0 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] kthread+0x279/0x300 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork+0x34/0x60 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork_asm+0x11/0x20 [ 95.890755] </TASK> [ 95.890755] [ 95.890755] Allocated by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] __kasan_kmalloc+0x86/0x90 [ 95.890755] __kmalloc+0x17f/0x360 [ 95.890755] sk_prot_alloc+0xe1/0x1a0 [ 95.890755] sk_alloc+0x31/0x4e0 [ 95.890755] bt_sock_alloc+0x2b/0x2a0 [ 95.890755] sco_sock_create+0xad/0x320 [ 95.890755] bt_sock_create+0x145/0x320 [ 95.890755] __sock_create+0x2e1/0x650 [ 95.890755] __sys_socket+0xd0/0x280 [ 95.890755] __x64_sys_socket+0x75/0x80 [ 95.890755] do_syscall_64+0xc4/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] Freed by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] kasan_save_free_info+0x40/0x50 [ 95.890755] poison_slab_object+0x118/0x180 [ 95.890755] __kasan_slab_free+0x12/0x30 [ 95.890755] kfree+0xb2/0x240 [ 95.890755] __sk_destruct+0x317/0x410 [ 95.890755] sco_sock_release+0x232/0x280 [ 95.890755] sock_close+0xb2/0x210 [ 95.890755] __fput+0x37f/0x770 [ 95.890755] task_work_run+0x1ae/0x210 [ 95.890755] get_signal+0xe17/0xf70 [ 95.890755] arch_do_signal_or_restart+0x3f/0x520 [ 95.890755] syscall_exit_to_user_mode+0x55/0x120 [ 95.890755] do_syscall_64+0xd1/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] The buggy address belongs to the object at ffff88800c388000 [ 95.890755] which belongs to the cache kmalloc-1k of size 1024 [ 95.890755] The buggy address is located 128 bytes inside of [ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400) [ 95.890755] [ 95.890755] The buggy address belongs to the physical page: [ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388 [ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 95.890755] ano ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: use timestamp to check for set element timeout Add a timestamp field at the beginning of the transaction, store it in the nftables per-netns area. Update set backend .insert, .deactivate and sync gc path to use the timestamp, this avoids that an element expires while control plane transaction is still unfinished. .lookup and .update, which are used from packet path, still use the current time to check if the element has expired. And .get path and dump also since this runs lockless under rcu read size lock. Then, there is async gc which also needs to check the current time since it runs asynchronously from a workqueue.Show less

In the Linux kernel, the following vulnerability has been resolved: net: gtp: Fix Use-After-Free in gtp_dellink Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of gtp_dellink, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.Show less

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix Use-After-Free in ovs_ct_exit Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.Show less

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix Use-After-Free in tcp_ao_connect_init Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of tcp_ao_connect_init, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe.Show less

In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Add missing skb_mark_for_recycle Notice that skb_mark_for_recycle() is introduced later than fixes tag in commit 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling"). It is believed that fixes tag were missing a call to page_pool_release_page() between v5.9 to v5.14, after which is should have used skb_mark_for_recycle(). Since v6.6 the call page_pool_release_page() were removed (in commit 535b9c61bdef ("net: page_pool: hide page_pool_release_page()") and remaining callers converted (in commit 6bfef2ec0172 ("Merge branch 'net-page_pool-remove-page_pool_release_page'")). This leak became visible in v6.8 via commit dba1b8a7ab68 ("mm/page_pool: catch page_pool memory leaks").Show less

In the Linux kernel, the following vulnerability has been resolved: usb: aqc111: check packet for fixup for true limit If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver.Show less

In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: disable sending io_uring over sockets File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary.Show less

Linux Kernel Bluetooth CMTP Module Double Free Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Linux Kernel. An attacker must first obtain the ability to execute high-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the CMTP module. The issue results from the lack of validating the existence of an object prior to performing further free operations on the object. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the kernel. Was ZDI-CAN-11977.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921e: fix crash in chip reset fail In case of drv own fail in reset, we may need to run mac_reset several times. The sequence would trigger system crash as the log below. Because we do not re-enable/schedule "tx_napi" before disable it again, the process would keep waiting for state change in napi_diable(). To avoid the problem and keep status synchronize for each run, goto final resource handling if drv own failed. [ 5857.353423] mt7921e 0000:3b:00.0: driver own failed [ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own [ 5859.633430] mt7921e 0000:3b:00.0: driver own failed [ 5859.633444] ------------[ cut here ]------------ [ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d [ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common] [ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150 [ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202 ...... [ 5859.633766] Call Trace: [ 5859.633768] <TASK> [ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e] [ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common] [ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common] [ 5859.633794] ? __kasan_check_read+0x11/0x20 [ 5859.633802] process_one_work+0x7ee/0x1320 [ 5859.633810] worker_thread+0x53c/0x1240 [ 5859.633818] kthread+0x2b8/0x370 [ 5859.633824] ? process_one_work+0x1320/0x1320 [ 5859.633828] ? kthread_complete_and_exit+0x30/0x30 [ 5859.633834] ret_from_fork+0x1f/0x30 [ 5859.633842] </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: add a force flush to delay work when radeon Although radeon card fence and wait for gpu to finish processing current batch rings, there is still a corner case that radeon lockup work queue may not be fully flushed, and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to put device in D3hot state. Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State. > Configuration and Message requests are the only TLPs accepted by a Function in > the D3hot state. All other received Requests must be handled as Unsupported Requests, > and all received Completions may optionally be handled as Unexpected Completions. This issue will happen in following logs: Unable to handle kernel paging request at virtual address 00008800e0008010 CPU 0 kworker/0:3(131): Oops 0 pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W pc is at si_gpu_check_soft_reset+0x3c/0x240 ra is at si_dma_is_lockup+0x34/0xd0 v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000 t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258 t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000 s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018 s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000 s6 = fff00007ef07bd98 a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008 a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338 t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800 t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000 gp = ffffffff81d89690 sp = 00000000aa814126 Disabling lock debugging due to kernel taint Trace: [<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0 [<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290 [<ffffffff80977010>] process_one_work+0x280/0x550 [<ffffffff80977350>] worker_thread+0x70/0x7c0 [<ffffffff80977410>] worker_thread+0x130/0x7c0 [<ffffffff80982040>] kthread+0x200/0x210 [<ffffffff809772e0>] worker_thread+0x0/0x7c0 [<ffffffff80981f8c>] kthread+0x14c/0x210 [<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20 [<ffffffff80981e40>] kthread+0x0/0x210 Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101 <88210000> 4821ed21 So force lockup work queue flush to fix this problem.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use-after-free warning Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0Show less

In the Linux kernel, the following vulnerability has been resolved: ice: Fix DMA mappings leak Fix leak, when user changes ring parameters. During reallocation of RX buffers, new DMA mappings are created for those buffers. New buffers with different RX ring count should substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused leak of already mapped DMA. Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate back to rx_buf, when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XDP_SETUP_XSK_POOL handler. Steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done doneShow less

In the Linux kernel, the following vulnerability has been resolved: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: emu10k1: Fix out of bounds access in snd_emu10k1_pcm_channel_alloc() The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by calling aplay multiple times with 16 channels: aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40 index 65 is out of range for type 'snd_emu10k1_voice [64]' CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7 Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x3f __ubsan_handle_out_of_bounds.cold+0x44/0x49 snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1] snd_pcm_hw_params+0x29f/0x600 [snd_pcm] snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm] ? exit_to_user_mode_prepare+0x35/0x170 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x26/0x50 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_prepare+0x35/0x170 snd_pcm_ioctl+0x27/0x40 [snd_pcm] __x64_sys_ioctl+0x95/0xd0 do_syscall_64+0x5c/0x90 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcdShow less

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface() There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and the number of it's interfaces less than 4, an out-of-bounds read bug occurs when parsing the interface descriptor for this device. Fix this by checking the number of interfaces.Show less

In the Linux kernel, the following vulnerability has been resolved: sched/debug: fix dentry leak in update_sched_domain_debugfs Kuyo reports that the pattern of using debugfs_remove(debugfs_lookup()) leaks a dentry and with a hotplug stress test, the machine eventually runs out of memory. Fix this up by using the newly created debugfs_lookup_and_remove() call instead which properly handles the dentry reference counting logic.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix memory leak when using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput().Show less