A programming error in the nxdomain-redirect feature can cause an assertion failure in query.c if the alternate namespace used by nxdomain-redirect is a descendant of a zone that is served locally. The most likely scenar...Show moreA programming error in the nxdomain-redirect feature can cause an assertion failure in query.c if the alternate namespace used by nxdomain-redirect is a descendant of a zone that is served locally. The most likely scenario where this might occur is if the server, in addition to performing NXDOMAIN redirection for recursive clients, is also serving a local copy of the root zone or using mirroring to provide the root zone, although other configurations are also possible. Versions affected: BIND 9.12.0-> 9.12.4, 9.14.0. Also affects all releases in the 9.13 development branch.Show less |
Controls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9....Show moreControls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2019-6465.Show less |
"managed-keys" is a feature which allows a BIND resolver to automatically maintain the keys used by trust anchors which operators configure for use in DNSSEC validation. Due to an error in the managed-keys feature it is...Show more"managed-keys" is a feature which allows a BIND resolver to automatically maintain the keys used by trust anchors which operators configure for use in DNSSEC validation. Due to an error in the managed-keys feature it is possible for a BIND server which uses managed-keys to exit due to an assertion failure if, during key rollover, a trust anchor's keys are replaced with keys which use an unsupported algorithm. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5745.Show less |
A failure to free memory can occur when processing messages having a specific combination of EDNS options. Versions affected are: BIND 9.10.7 -> 9.10.8-P1, 9.11.3 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.10.7-S1...Show moreA failure to free memory can occur when processing messages having a specific combination of EDNS options. Versions affected are: BIND 9.10.7 -> 9.10.8-P1, 9.11.3 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.10.7-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected.Show less |
By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most...Show moreBy design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.Show less |
To provide fine-grained controls over the ability to use Dynamic DNS (DDNS) to update records in a zone, BIND 9 provides a feature called update-policy. Various rules can be configured to limit the types of updates that...Show moreTo provide fine-grained controls over the ability to use Dynamic DNS (DDNS) to update records in a zone, BIND 9 provides a feature called update-policy. Various rules can be configured to limit the types of updates that can be performed by a client, depending on the key used when sending the update request. Unfortunately, some rule types were not initially documented, and when documentation for them was added to the Administrator Reference Manual (ARM) in change #3112, the language that was added to the ARM at that time incorrectly described the behavior of two rule types, krb5-subdomain and ms-subdomain. This incorrect documentation could mislead operators into believing that policies they had configured were more restrictive than they actually were. This affects BIND versions prior to BIND 9.11.5 and BIND 9.12.3.Show less |
"deny-answer-aliases" is a little-used feature intended to help recursive server operators protect end users against DNS rebinding attacks, a potential method of circumventing the security model used by client browsers....Show more"deny-answer-aliases" is a little-used feature intended to help recursive server operators protect end users against DNS rebinding attacks, a potential method of circumventing the security model used by client browsers. However, a defect in this feature makes it easy, when the feature is in use, to experience an assertion failure in name.c. Affects BIND 9.7.0->9.8.8, 9.9.0->9.9.13, 9.10.0->9.10.8, 9.11.0->9.11.4, 9.12.0->9.12.2, 9.13.0->9.13.2.Show less |
Change #4777 (introduced in October 2017) introduced an unforeseen issue in releases which were issued after that date, affecting which clients are permitted to make recursive queries to a BIND nameserver. The intended (...Show moreChange #4777 (introduced in October 2017) introduced an unforeseen issue in releases which were issued after that date, affecting which clients are permitted to make recursive queries to a BIND nameserver. The intended (and documented) behavior is that if an operator has not specified a value for the "allow-recursion" setting, it SHOULD default to one of the following: none, if "recursion no;" is set in named.conf; a value inherited from the "allow-query-cache" or "allow-query" settings IF "recursion yes;" (the default for that setting) AND match lists are explicitly set for "allow-query-cache" or "allow-query" (see the BIND9 Administrative Reference Manual section 6.2 for more details); or the intended default of "allow-recursion {localhost; localnets;};" if "recursion yes;" is in effect and no values are explicitly set for "allow-query-cache" or "allow-query". However, because of the regression introduced by change #4777, it is possible when "recursion yes;" is in effect and no match list values are provided for "allow-query-cache" or "allow-query" for the setting of "allow-recursion" to inherit a setting of all hosts from the "allow-query" setting default, improperly permitting recursion to all clients. Affects BIND 9.9.12, 9.10.7, 9.11.3, 9.12.0->9.12.1-P2, the development release 9.13.0, and also releases 9.9.12-S1, 9.10.7-S1, 9.11.3-S1, and 9.11.3-S2 from BIND 9 Supported Preview Edition.Show less |
A problem with the implementation of the new serve-stale feature in BIND 9.12 can lead to an assertion failure in rbtdb.c, even when stale-answer-enable is off. Additionally, problematic interaction between the serve-sta...Show moreA problem with the implementation of the new serve-stale feature in BIND 9.12 can lead to an assertion failure in rbtdb.c, even when stale-answer-enable is off. Additionally, problematic interaction between the serve-stale feature and NSEC aggressive negative caching can in some cases cause undesirable behavior from named, such as a recursion loop or excessive logging. Deliberate exploitation of this condition could cause operational problems depending on the particular manifestation -- either degradation or denial of service. Affects BIND 9.12.0 and 9.12.1.Show less |
An error in zone database reference counting can lead to an assertion failure if a server which is running an affected version of BIND attempts several transfers of a slave zone in quick succession. This defect could be...Show moreAn error in zone database reference counting can lead to an assertion failure if a server which is running an affected version of BIND attempts several transfers of a slave zone in quick succession. This defect could be deliberately exercised by an attacker who is permitted to cause a vulnerable server to initiate zone transfers (for example: by sending valid NOTIFY messages), causing the named process to exit after failing the assertion test. Affects BIND 9.12.0 and 9.12.1.Show less |
While handling a particular type of malformed packet BIND erroneously selects a SERVFAIL rcode instead of a FORMERR rcode. If the receiving view has the SERVFAIL cache feature enabled, this can trigger an assertion failu...Show moreWhile handling a particular type of malformed packet BIND erroneously selects a SERVFAIL rcode instead of a FORMERR rcode. If the receiving view has the SERVFAIL cache feature enabled, this can trigger an assertion failure in badcache.c when the request doesn't contain all of the expected information. Affects BIND 9.10.5-S1 to 9.10.5-S4, 9.10.6-S1, 9.10.6-S2.Show less |
BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8....Show moreBIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1.Show less |
An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name for the zone and service being targeted may be able to manipulate BIND into accepting an...Show moreAn attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name for the zone and service being targeted may be able to manipulate BIND into accepting an unauthorized dynamic update. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2.Show less |
An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name may be able to circumvent TSIG authentication of AXFR requests via a carefully constructe...Show moreAn attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name may be able to circumvent TSIG authentication of AXFR requests via a carefully constructed request packet. A server that relies solely on TSIG keys for protection with no other ACL protection could be manipulated into: providing an AXFR of a zone to an unauthorized recipient or accepting bogus NOTIFY packets. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2.Show less |
The BIND installer on Windows uses an unquoted service path which can enable a local user to achieve privilege escalation if the host file system permissions allow this. Affects BIND 9.2.6-P2->9.2.9, 9.3.2-P1->9.3.6, 9.4...Show moreThe BIND installer on Windows uses an unquoted service path which can enable a local user to achieve privilege escalation if the host file system permissions allow this. Affects BIND 9.2.6-P2->9.2.9, 9.3.2-P1->9.3.6, 9.4.0->9.8.8, 9.9.0->9.9.10, 9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, 9.10.5-S1.Show less |
If named is configured to use Response Policy Zones (RPZ) an error processing some rule types can lead to a condition where BIND will endlessly loop while handling a query. Affects BIND 9.9.10, 9.10.5, 9.11.0->9.11.1, 9....Show moreIf named is configured to use Response Policy Zones (RPZ) an error processing some rule types can lead to a condition where BIND will endlessly loop while handling a query. Affects BIND 9.9.10, 9.10.5, 9.11.0->9.11.1, 9.9.10-S1, 9.10.5-S1.Show less |
named contains a feature which allows operators to issue commands to a running server by communicating with the server process over a control channel, using a utility program such as rndc. A regression introduced in a re...Show morenamed contains a feature which allows operators to issue commands to a running server by communicating with the server process over a control channel, using a utility program such as rndc. A regression introduced in a recent feature change has created a situation under which some versions of named can be caused to exit with a REQUIRE assertion failure if they are sent a null command string. Affects BIND 9.9.9->9.9.9-P7, 9.9.10b1->9.9.10rc2, 9.10.4->9.10.4-P7, 9.10.5b1->9.10.5rc2, 9.11.0->9.11.0-P4, 9.11.1b1->9.11.1rc2, 9.9.9-S1->9.9.9-S9.Show less |
Mistaken assumptions about the ordering of records in the answer section of a response containing CNAME or DNAME resource records could lead to a situation in which named would exit with an assertion failure when process...Show moreMistaken assumptions about the ordering of records in the answer section of a response containing CNAME or DNAME resource records could lead to a situation in which named would exit with an assertion failure when processing a response in which records occurred in an unusual order. Affects BIND 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0-P3, 9.11.1b1->9.11.1rc1, and 9.9.9-S8.Show less |
A query with a specific set of characteristics could cause a server using DNS64 to encounter an assertion failure and terminate. An attacker could deliberately construct a query, enabling denial-of-service against a serv...Show moreA query with a specific set of characteristics could cause a server using DNS64 to encounter an assertion failure and terminate. An attacker could deliberately construct a query, enabling denial-of-service against a server if it was configured to use the DNS64 feature and other preconditions were met. Affects BIND 9.8.0 -> 9.8.8-P1, 9.9.0 -> 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.0 -> 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0 -> 9.11.0-P3, 9.11.1b1->9.11.1rc1, 9.9.3-S1 -> 9.9.9-S8.Show less |
Under some conditions when using both DNS64 and RPZ to rewrite query responses, query processing can resume in an inconsistent state leading to either an INSIST assertion failure or an attempt to read through a NULL poin...Show moreUnder some conditions when using both DNS64 and RPZ to rewrite query responses, query processing can resume in an inconsistent state leading to either an INSIST assertion failure or an attempt to read through a NULL pointer. Affects BIND 9.8.8, 9.9.3-S1 -> 9.9.9-S7, 9.9.3 -> 9.9.9-P5, 9.9.10b1, 9.10.0 -> 9.10.4-P5, 9.10.5b1, 9.11.0 -> 9.11.0-P2, 9.11.1b1.Show less |