Power System S1024 (9105 42a) Firmware

IBM PowerVM Hypervisor FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 could allow a local attacker with administrative privileges to decrypt encrypted data due to certain hypervisor calls utilizing less entropy than requested.Show less

IBM PowerVM Hypervisor Platform KeyStore (PKS) and virtual TPM FW1110.00 through FW1110.20, FW1060.00 through FW1060.71, and FW950.00 through FW950.H2 use persistent storage key seeds that result in an AES key with reduced strength. An attacker with access to the service processor or HMC could exploit this weakness to derive the encryption key and access the data.Show less

IBM OpenBMC FW1060.00 through FW1060.80 is affected by a vulnerability in the BMC firmware update process. An attacker with authenticated administrator-level access to the BMC can, under specific conditions, execute arbitrary code, resulting in a confidentiality, integrity, and availability impact.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in host firmware configuration parsing. An attacker with authenticated service-level access to the service processor can write specially crafted configuration data, causing the host firmware boot stack to crash with possible memory corruption during system initialisation, resulting in an integrity and availability impact to the managed system.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in the partition firmware and compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition performing a network boot can prevent that partition from completing its boot sequence. On partitions where OS secure boot is not enabled, which is the default configuration, the attacker can also substitute the boot image, compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call to inject an arbitrary amount of data into hypervisor or partition memory, resulting in either a crash causing a full platform re-IPL and terminating all hosted partitions, or corruption of hypervisor or partition memory. The PowerVM hypervisor will restart automatically; however, repeated exploitation could result in a sustained availability impact. Successful exploitation results in an integrity and availability impact to the managed system.Show less

IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can access and disrupt host processor state, potentially affecting the managed system and all hosted partitions, resulting in an confidentiality, and availability impact.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker with access to the same network as a partition undergoing iSCSI SAN network boot can prevent that partition from completing its boot sequence. Other partitions and the managed system are not affected. Only partitions actively performing an iSCSI SAN network boot are affected, resulting in an availability impact.Show less

IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 through OP940.81 (Power HMC) is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can read and write arbitrary regions of host system memory, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact.Show less

IBM Virtualization Management Interface FW1110.00 through FW1110.30, FW1120.00 through FW1120.00, and FW1060.00 through FW1060.80 is affected by a vulnerability in the Virtualization Management Interface (VMI). An attacker with authenticated administrator-level access can cause the VMI to crash. The VMI will restart automatically; however, repeated exploitation could result in a sustained availability impact.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the FSP can send a specially crafted mailbox message to read or modify arbitrary regions of Hostboot memory, compromising the host firmware boot stack and the hypervisor subsequently loaded by it. Successful exploitation results in a confidentiality, integrity, and availability impact to the managed system.Show less

IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware runtime, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact to the managed system.Show less

Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the host firmware. An attacker with service access to the service processor can supply a carefully crafted command that could leak the contents of hardware registers that should be inaccessible to the service processor. Successful exploitation could result in limited confidentiality or availability impacts to the affected host system.Show less

IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can write arbitrary data to hardware control registers, allowing full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact.Show less

Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1, and OP940.00 - OP940.81 is affected by a vulnerability in the service processor mailbox interface. An attacker with authenticated service-level access to the BMC/FSP can exploit this vulnerability, allowing arbitrary code to be executed in the host firmware runtime, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact to the managed system.Show less

IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in host firmware configuration parsing. An attacker with service-level access to the BMC/FSP can supply specially crafted configuration data, compromising the host firmware boot stage and everything subsequently loaded by it, resulting in a confidentiality, integrity, and availability impact to the managed system.Show less

IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can execute arbitrary code on the host system, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact.Show less

Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the host firmware boot process image validation path. An attacker with service access to the service processor can supply a maliciously crafted code update image, allowing arbitrary code to be executed on the host system. Successful exploitation could result in a confidentiality, integrity, and availability impact to the affected host system.Show less