Fedora

Redis is an open source, in-memory database that persists on disk. An integer overflow bug in the underlying string library can be used to corrupt the heap and potentially result with denial of service or remote code execution. The vulnerability involves changing the default proto-max-bulk-len configuration parameter to a very large value and constructing specially crafted network payloads or commands. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the proto-max-bulk-len configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.Show less

Redis is an open source, in-memory database that persists on disk. The redis-cli command line tool and redis-sentinel service may be vulnerable to integer overflow when parsing specially crafted large multi-bulk network replies. This is a result of a vulnerability in the underlying hiredis library which does not perform an overflow check before calling the calloc() heap allocation function. This issue only impacts systems with heap allocators that do not perform their own overflow checks. Most modern systems do and are therefore not likely to be affected. Furthermore, by default redis-sentinel uses the jemalloc allocator which is also not vulnerable. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14.Show less

Redis is an open source, in-memory database that persists on disk. An integer overflow bug affecting all versions of Redis can be exploited to corrupt the heap and potentially be used to leak arbitrary contents of the heap or trigger remote code execution. The vulnerability involves changing the default set-max-intset-entries configuration parameter to a very large value and constructing specially crafted commands to manipulate sets. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the set-max-intset-entries configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.Show less

Redis is an open source, in-memory database that persists on disk. When parsing an incoming Redis Standard Protocol (RESP) request, Redis allocates memory according to user-specified values which determine the number of elements (in the multi-bulk header) and size of each element (in the bulk header). An attacker delivering specially crafted requests over multiple connections can cause the server to allocate significant amount of memory. Because the same parsing mechanism is used to handle authentication requests, this vulnerability can also be exploited by unauthenticated users. The problem is fixed in Redis versions 6.2.6, 6.0.16 and 5.0.14. An additional workaround to mitigate this problem without patching the redis-server executable is to block access to prevent unauthenticated users from connecting to Redis. This can be done in different ways: Using network access control tools like firewalls, iptables, security groups, etc. or Enabling TLS and requiring users to authenticate using client side certificates.Show less

Redis is an open source, in-memory database that persists on disk. When using the Redis Lua Debugger, users can send malformed requests that cause the debugger’s protocol parser to read data beyond the actual buffer. This issue affects all versions of Redis with Lua debugging support (3.2 or newer). The problem is fixed in versions 6.2.6, 6.0.16 and 5.0.14.Show less

Redis is an open source, in-memory database that persists on disk. An integer overflow bug in the ziplist data structure used by all versions of Redis can be exploited to corrupt the heap and potentially result with remote code execution. The vulnerability involves modifying the default ziplist configuration parameters (hash-max-ziplist-entries, hash-max-ziplist-value, zset-max-ziplist-entries or zset-max-ziplist-value) to a very large value, and then constructing specially crafted commands to create very large ziplists. The problem is fixed in Redis versions 6.2.6, 6.0.16, 5.0.14. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the above configuration parameters. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.Show less

Redis is an open source, in-memory database that persists on disk. In affected versions an integer overflow bug in Redis can be exploited to corrupt the heap and potentially result with remote code execution. The vulnerability involves changing the default proto-max-bulk-len and client-query-buffer-limit configuration parameters to very large values and constructing specially crafted very large stream elements. The problem is fixed in Redis 6.2.6, 6.0.16 and 5.0.14. For users unable to upgrade an additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from modifying the proto-max-bulk-len configuration parameter. This can be done using ACL to restrict unprivileged users from using the CONFIG SET command.Show less

Redis is an open source, in-memory database that persists on disk. In affected versions specially crafted Lua scripts executing in Redis can cause the heap-based Lua stack to be overflowed, due to incomplete checks for this condition. This can result with heap corruption and potentially remote code execution. This problem exists in all versions of Redis with Lua scripting support, starting from 2.6. The problem is fixed in versions 6.2.6, 6.0.16 and 5.0.14. For users unable to update an additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands.Show less

containerd is an open source container runtime with an emphasis on simplicity, robustness and portability. A bug was found in containerd where container root directories and some plugins had insufficiently restricted permissions, allowing otherwise unprivileged Linux users to traverse directory contents and execute programs. When containers included executable programs with extended permission bits (such as setuid), unprivileged Linux users could discover and execute those programs. When the UID of an unprivileged Linux user on the host collided with the file owner or group inside a container, the unprivileged Linux user on the host could discover, read, and modify those files. This vulnerability has been fixed in containerd 1.4.11 and containerd 1.5.7. Users should update to these version when they are released and may restart containers or update directory permissions to mitigate the vulnerability. Users unable to update should limit access to the host to trusted users. Update directory permission on container bundles directories.Show less

When curl >= 7.20.0 and <= 7.78.0 connects to an IMAP or POP3 server to retrieve data using STARTTLS to upgrade to TLS security, the server can respond and send back multiple responses at once that curl caches. curl would then upgrade to TLS but not flush the in-queue of cached responses but instead continue using and trustingthe responses it got *before* the TLS handshake as if they were authenticated.Using this flaw, it allows a Man-In-The-Middle attacker to first inject the fake responses, then pass-through the TLS traffic from the legitimate server and trick curl into sending data back to the user thinking the attacker's injected data comes from the TLS-protected server.Show less

A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.Show less

sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user.Show less

When sending data to an MQTT server, libcurl <= 7.73.0 and 7.78.0 could in some circumstances erroneously keep a pointer to an already freed memory area and both use that again in a subsequent call to send data and also free it *again*.Show less

Flask-RESTX (pypi package flask-restx) is a community driven fork of Flask-RESTPlus. Flask-RESTX before version 0.5.1 is vulnerable to ReDoS (Regular Expression Denial of Service) in email_regex. This is fixed in version 0.5.1.Show less

loop_rw_iter in fs/io_uring.c in the Linux kernel 5.10 through 5.14.6 allows local users to gain privileges by using IORING_OP_PROVIDE_BUFFERS to trigger a free of a kernel buffer, as demonstrated by using /proc/<pid>/maps for exploitation.Show less

Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.26.0 and before version 0.30.0 is affected by a memory unsoundness vulnerability. There was an invalid free and out-of-bounds read and write bug when running Wasm that uses `externref`s in Wasmtime. To trigger this bug, Wasmtime needs to be running Wasm that uses `externref`s, the host creates non-null `externrefs`, Wasmtime performs a garbage collection (GC), and there has to be a Wasm frame on the stack that is at a GC safepoint where there are no live references at this safepoint, and there is a safepoint with live references earlier in this frame's function. Under this scenario, Wasmtime would incorrectly use the GC stack map for the safepoint from earlier in the function instead of the empty safepoint. This would result in Wasmtime treating arbitrary stack slots as `externref`s that needed to be rooted for GC. At the *next* GC, it would be determined that nothing was referencing these bogus `externref`s (because nothing could ever reference them, because they are not really `externref`s) and then Wasmtime would deallocate them and run `<ExternRef as Drop>::drop` on them. This results in a free of memory that is not necessarily on the heap (and shouldn't be freed at this moment even if it was), as well as potential out-of-bounds reads and writes. Even though support for `externref`s (via the reference types proposal) is enabled by default, unless you are creating non-null `externref`s in your host code or explicitly triggering GCs, you cannot be affected by this bug. We have reason to believe that the effective impact of this bug is relatively small because usage of `externref` is currently quite rare. This bug has been patched and users should upgrade to Wasmtime version 0.30.0. If you cannot upgrade Wasmtime at this time, you can avoid this bug by disabling the reference types proposal by passing `false` to `wasmtime::Config::wasm_reference_types`.Show less

Wasmtime is an open source runtime for WebAssembly & WASI. Wasmtime before version 0.30.0 is affected by a type confusion vulnerability. As a Rust library the `wasmtime` crate clearly marks which functions are safe and which are `unsafe`, guaranteeing that if consumers never use `unsafe` then it should not be possible to have memory unsafety issues in their embeddings of Wasmtime. An issue was discovered in the safe API of `Linker::func_*` APIs. These APIs were previously not sound when one `Engine` was used to create the `Linker` and then a different `Engine` was used to create a `Store` and then the `Linker` was used to instantiate a module into that `Store`. Cross-`Engine` usage of functions is not supported in Wasmtime and this can result in type confusion of function pointers, resulting in being able to safely call a function with the wrong type. Triggering this bug requires using at least two `Engine` values in an embedding and then additionally using two different values with a `Linker` (one at the creation time of the `Linker` and another when instantiating a module with the `Linker`). It's expected that usage of more-than-one `Engine` in an embedding is relatively rare since an `Engine` is intended to be a globally shared resource, so the expectation is that the impact of this issue is relatively small. The fix implemented is to change this behavior to `panic!()` in Rust instead of silently allowing it. Using different `Engine` instances with a `Linker` is a programmer bug that `wasmtime` catches at runtime. This bug has been patched and users should upgrade to Wasmtime version 0.30.0. If you cannot upgrade Wasmtime and are using more than one `Engine` in your embedding it's recommended to instead use only one `Engine` for the entire program if possible. An `Engine` is designed to be a globally shared resource that is suitable to have only one for the lifetime of an entire process. If using multiple `Engine`s is required then code should be audited to ensure that `Linker` is only used with one `Engine`.Show less

Wasmtime is an open source runtime for WebAssembly & WASI. In Wasmtime from version 0.19.0 and before version 0.30.0 there was a use-after-free bug when passing `externref`s from the host to guest Wasm content. To trigger the bug, you have to explicitly pass multiple `externref`s from the host to a Wasm instance at the same time, either by passing multiple `externref`s as arguments from host code to a Wasm function, or returning multiple `externref`s to Wasm from a multi-value return function defined in the host. If you do not have host code that matches one of these shapes, then you are not impacted. If Wasmtime's `VMExternRefActivationsTable` became filled to capacity after passing the first `externref` in, then passing in the second `externref` could trigger a garbage collection. However the first `externref` is not rooted until we pass control to Wasm, and therefore could be reclaimed by the collector if nothing else was holding a reference to it or otherwise keeping it alive. Then, when control was passed to Wasm after the garbage collection, Wasm could use the first `externref`, which at this point has already been freed. We have reason to believe that the effective impact of this bug is relatively small because usage of `externref` is currently quite rare. The bug has been fixed, and users should upgrade to Wasmtime 0.30.0. If you cannot upgrade Wasmtime yet, you can avoid the bug by disabling reference types support in Wasmtime by passing `false` to `wasmtime::Config::wasm_reference_types`.Show less