Nshield Hsmi Firmware

Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a Physically Proximate Attacker to access the internal components of the appliance, without leaving tamper evidence. To exploit this, the attacker needs to remove the tamper label and all fixing screws from the device without damaging it. This is called an F14 attack.Show less

Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a Physically Proximate Attacker to Escalate Privileges by enabling the USB interface through chassis probe insertion during system boot, aka "Unauthorized Reactivation of the USB interface" or F01.Show less

Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker (with elevated privileges) to read and modify the Appliance SSD contents (because they are unencrypted).Show less

Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker to escalate privileges by booting from a USB device with a valid root filesystem. This occurs because of insecure default settings in the Legacy GRUB Bootloader.Show less

Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker to escalate privileges by editing the Legacy GRUB bootloader configuration to start a root shell upon boot of the host OS. This is called F06.Show less

The Chassis Management Board in Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allows a physically proximate attacker to persistently modify firmware and influence the (insecurely configured) appliance boot process. To exploit this, the attacker must modify the firmware via JTAG or perform an upgrade to the chassis management board firmware. This is called F03.Show less

The Chassis Management Board in Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allows a physically proximate attacker to obtain debug access and escalate privileges by bypassing the tamper label and opening the chassis without leaving evidence, and accessing the JTAG connector. This is called F02.Show less