Ios Xr

A vulnerability in the Border Gateway Protocol (BGP) additional paths feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to prevent authorized users from monitoring the BGP status and cause the BGP process to stop processing new updates, resulting in a denial of service (DOS) condition. The vulnerability is due to an incorrect calculation of lexicographical order when displaying additional path information within Cisco IOS XR Software, which causes an infinite loop. An attacker could exploit this vulnerability by sending a specific BGP update from a BGP neighbor peer session of an affected device; an authorized user must then issue a show bgp command for the vulnerability to be exploited. A successful exploit could allow the attacker to prevent authorized users from properly monitoring the BGP status and prevent BGP from processing new updates, resulting in outdated information in the routing and forwarding tables.Show less

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.Show less

A vulnerability in the Topology Discovery Service of Cisco One Platform Kit (onePK) in Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient length restrictions when the onePK Topology Discovery Service parses Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol message to an affected device. An exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges, or to cause a process crash, which could result in a reload of the device and cause a DoS condition.Show less

A vulnerability in the IPsec packet processor of Cisco IOS XR Software could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition for IPsec sessions to an affected device. The vulnerability is due to improper handling of packets by the IPsec packet processor. An attacker could exploit this vulnerability by sending malicious ICMP error messages to an affected device that get punted to the IPsec packet processor. A successful exploit could allow the attacker to deplete IPsec memory, resulting in all future IPsec packets to an affected device being dropped by the device. Manual intervention is required to recover from this situation.Show less

A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Show less

A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability is due to improper validation of string input from certain fields in Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Show less

A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the IS–IS process. The vulnerability is due to improper handling of a Simple Network Management Protocol (SNMP) request for specific Object Identifiers (OIDs) by the IS–IS process. An attacker could exploit this vulnerability by sending a crafted SNMP request to the affected device. A successful exploit could allow the attacker to cause a DoS condition in the IS–IS process.Show less

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.Show less

Multiple vulnerabilities in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerabilities are due to incorrect processing of BGP update messages that contain crafted EVPN attributes. An attacker could exploit these vulnerabilities by sending BGP EVPN update messages with malformed attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit these vulnerabilities, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.Show less

A vulnerability in the implementation of Border Gateway Protocol (BGP) Ethernet VPN (EVPN) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains crafted EVPN attributes. An attacker could indirectly exploit the vulnerability by sending BGP EVPN update messages with a specific, malformed attribute to an affected system and waiting for a user on the device to display the EVPN operational routes’ status. If successful, the attacker could cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer, or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.Show less

A vulnerability in the implementation of the Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of a BGP update message that contains a specific BGP attribute. An attacker could exploit this vulnerability by sending BGP update messages that include a specific, malformed attribute to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic only from explicitly defined peers. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim’s BGP network on an existing, valid TCP connection to a BGP peer.Show less

A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.Show less

A vulnerability in a CLI command related to the virtualization manager (VMAN) in Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. The vulnerability is due to insufficient validation of arguments passed to a specific VMAN CLI command on an affected device. An attacker who has valid administrator access to an affected device could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to run arbitrary commands on the underlying operating system with root privileges, which may lead to complete system compromise.Show less

A vulnerability in the implementation of Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS-IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IS–IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending specific link-state PDUs to an affected system to be processed. A successful exploit could allow the attacker to cause incorrect calculations used in the weighted remote shared risk link groups (SRLG) or in the IGP Flexible Algorithm. It could also cause tracebacks to the logs or potentially cause the receiving device to crash the IS–IS process, resulting in a DoS condition.Show less

A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS–IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of crafted IS–IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending a crafted link-state PDU to an affected system to be processed. A successful exploit could allow the attacker to cause all routers within the IS–IS area to unexpectedly restart the IS–IS process, resulting in a DoS condition. This vulnerability affects Cisco devices if they are running a vulnerable release of Cisco IOS XR Software earlier than Release 6.6.3 and are configured with the IS–IS routing protocol. Cisco has confirmed that this vulnerability affects both Cisco IOS XR 32-bit Software and Cisco IOS XR 64-bit Software.Show less

A vulnerability in the implementation of Border Gateway Protocol (BGP) functionality in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect processing of certain BGP update messages. An attacker could exploit this vulnerability by sending BGP update messages that include a specific set of attributes to be processed by an affected system. A successful exploit could allow the attacker to cause the BGP process to restart unexpectedly, resulting in a DoS condition. The Cisco implementation of BGP accepts incoming BGP traffic from explicitly defined peers only. To exploit this vulnerability, the malicious BGP update message would need to come from a configured, valid BGP peer or would need to be injected by the attacker into the victim's BGP network on an existing, valid TCP connection to a BGP peer.Show less

A vulnerability in the Border Gateway Patrol (BGP) Multiprotocol Label Switching (MPLS)-based Ethernet VPN (EVPN) implementation of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs when the affected software processes specific EVPN routing information. An attacker could exploit this vulnerability by injecting malicious traffic patterns into the targeted EVPN network. A successful exploit could result in a crash of the l2vpn_mgr process on Provider Edge (PE) device members of the same EVPN instance (EVI). On each of the affected devices, a crash could lead to system instability and the inability to process or forward traffic through the device, resulting in a DoS condition that would require manual intervention to restore normal operating conditions.Show less

A vulnerability in the Multiprotocol Label Switching (MPLS) Operations, Administration, and Maintenance (OAM) implementation of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to the incorrect handling of certain MPLS OAM packets. An attacker could exploit this vulnerability by sending malicious MPLS OAM packets to an affected device. A successful exploit could allow the attacker to cause the lspv_server process to crash. The crash could lead to system instability and the inability to process or forward traffic though the device, resulting in a DoS condition that require manual intervention to restore normal operating conditions.Show less

A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform.Show less

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the PIM process to restart, resulting in a denial of service condition on an affected device. The vulnerability is due to the incorrect processing of crafted AutoRP packets. An attacker could exploit this vulnerability by sending crafted packets to port UDP 496 on a reachable IP address on the device. A successful exploit could allow the attacker to cause the PIM process to restart. Software versions prior to 6.2.3, 6.3.2, 6.4.0, and 6.5.1 are affected.Show less