Use of Uninitialized Resource

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when devlink reload during pf initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by taking devl_lock during initialization.Show less

In the Linux kernel, the following vulnerability has been resolved: i40e: fix vf may be used uninitialized in this function warning To fix the regression introduced by commit 52424f974bc5, which causes servers hang in very hard to reproduce conditions with resets races. Using two sources for the information is the root cause. In this function before the fix bumping v didn't mean bumping vf pointer. But the code used this variables interchangeably, so stale vf could point to different/not intended vf. Remove redundant "v" variable and iterate via single VF pointer across whole function instead to guarantee VF pointer validity.Show less

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: avoid putting an uninitialized iova_domain The system will crash if we put an uninitialized iova_domain, this could happen when an error occurs before initializing the iova_domain in vdpasim_create(). BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0 ... Call Trace: <TASK> put_iova_domain+0x29/0x220 vdpasim_free+0xd1/0x120 [vdpa_sim] vdpa_release_dev+0x21/0x40 [vdpa] device_release+0x33/0x90 kobject_release+0x63/0x160 vdpasim_create+0x127/0x2a0 [vdpa_sim] vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net] vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa] genl_family_rcv_msg_doit+0x112/0x140 genl_rcv_msg+0xdf/0x1d0 ... So we must make sure the iova_domain is already initialized before put it. In addition, we may get the following warning in this case: WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70 So we must make sure the iova_cache_put() is invoked only if the iova_cache_get() is already invoked. Let's fix it together.Show less

In the Linux kernel, the following vulnerability has been resolved: sched/scs: Reset task stack state in bringup_cpu() To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | doneShow less

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xaeShow less

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value Currently, when the rule related to IDLETIMER is added, idletimer_tg timer structure is initialized by kmalloc on executing idletimer_tg_create function. However, in this process timer->timer_type is not defined to a specific value. Thus, timer->timer_type has garbage value and it occurs kernel panic. So, this commit fixes the panic by initializing timer->timer_type using kzalloc instead of kmalloc. Test commands: # iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test $ cat /sys/class/xt_idletimer/timers/test Killed Splat looks like: BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70 Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917 CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0x6e/0x9c kasan_report.cold+0x112/0x117 ? alarm_expires_remaining+0x49/0x70 __asan_load8+0x86/0xb0 alarm_expires_remaining+0x49/0x70 idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d] dev_attr_show+0x3c/0x60 sysfs_kf_seq_show+0x11d/0x1f0 ? device_remove_bin_file+0x20/0x20 kernfs_seq_show+0xa4/0xb0 seq_read_iter+0x29c/0x750 kernfs_fop_read_iter+0x25a/0x2c0 ? __fsnotify_parent+0x3d1/0x570 ? iov_iter_init+0x70/0x90 new_sync_read+0x2a7/0x3d0 ? __x64_sys_llseek+0x230/0x230 ? rw_verify_area+0x81/0x150 vfs_read+0x17b/0x240 ksys_read+0xd9/0x180 ? vfs_write+0x460/0x460 ? do_syscall_64+0x16/0xc0 ? lockdep_hardirqs_on+0x79/0x120 __x64_sys_read+0x43/0x50 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0cdc819142 Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142 RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003 RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a4xx: fix error handling in a4xx_gpu_init() This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1.Show less

In the Linux kernel, the following vulnerability has been resolved: tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING syzbot reported the following uninit-value access issue [1]: ===================================================== BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline] BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756 strlen lib/string.c:418 [inline] strstr+0xb8/0x2f0 lib/string.c:756 tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595 genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline] genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline] netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd TIPC bearer-related names including link names must be null-terminated strings. If a link name which is not null-terminated is passed through netlink, strstr() and similar functions can cause buffer overrun. This causes the above issue. This patch changes the nla_policy for bearer-related names from NLA_STRING to NLA_NUL_STRING. This resolves the issue by ensuring that only null-terminated strings are accepted as bearer-related names. syzbot reported similar uninit-value issue related to bearer names [2]. The root cause of this issue is that a non-null-terminated bearer name was passed. This patch also resolved this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: llc: verify mac len before reading mac header LLC reads the mac header with eth_hdr without verifying that the skb has an Ethernet header. Syzbot was able to enter llc_rcv on a tun device. Tun can insert packets without mac len and with user configurable skb->protocol (passing a tun_pi header when not configuring IFF_NO_PI). BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002 Add a mac_len test before all three eth_hdr(skb) calls under net/llc. There are further uses in include/net/llc_pdu.h. All these are protected by a test skb->protocol == ETH_P_802_2. Which does not protect against this tun scenario. But the mac_len test added in this patch in llc_fixup_skb will indirectly protect those too. That is called from llc_rcv before any other LLC code. It is tempting to just add a blanket mac_len check in llc_rcv, but not sure whether that could break valid LLC paths that do not assume an Ethernet header. 802.2 LLC may be used on top of non-802.3 protocols in principle. The below referenced commit shows that used to, on top of Token Ring. At least one of the three eth_hdr uses goes back to before the start of git history. But the one that syzbot exercises is introduced in this commit. That commit is old enough (2008), that effectively all stable kernels should receive this.Show less

In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was stored to memory at: virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline] virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was created at: slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline] virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline] virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: vsock-loopback vsock_loopback_work ===================================================== The following simple reproducer can cause the issue described above: int main(void) { int sock; struct sockaddr_vm addr = { .svm_family = AF_VSOCK, .svm_cid = VMADDR_CID_ANY, .svm_port = 1234, }; sock = socket(AF_VSOCK, SOCK_STREAM, 0); connect(sock, (struct sockaddr *)&addr, sizeof(addr)); return 0; } This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the `struct virtio_vsock_hdr` are not initialized when a new skb is allocated in `virtio_transport_init_hdr()`. This patch resolves the issue by initializing these fields during allocation.Show less

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region.Show less

In the Linux kernel, the following vulnerability has been resolved: net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/Show less

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.Show less

In the Linux kernel, the following vulnerability has been resolved: net: fix uninit-value in caif_seqpkt_sendmsg When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline]Show less

In the Linux kernel, the following vulnerability has been resolved: geneve: fix header validation in geneve[6]_xmit_skb syzbot is able to trigger an uninit-value in geneve_xmit() [1] Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol. If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all. If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected. Add skb_vlan_inet_prepare() to perform a complete mac validation. Use this in geneve for the moment, I suspect we need to adopt this more broadly. v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest - Only call __vlan_get_protocol() for vlan types. v2,v3 - Addressed Sabrina comments on v1 and v2 [1] BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024Show less

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet syzbot reported the following uninit-value access issue [1][2]: nci_rx_work() parses and processes received packet. When the payload length is zero, each message type handler reads uninitialized payload and KMSAN detects this issue. The receipt of a packet with a zero-size payload is considered unexpected, and therefore, such packets should be silently discarded. This patch resolved this issue by checking payload size before calling each message type handler codes.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: prevent kernel-infoleak syzbot found that tcf_skbmod_dump() was copying four bytes from kernel stack to user space [1]. The issue here is that 'struct tc_skbmod' has a four bytes hole. We need to clear the structure before filling fields. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline] netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242 __do_sys_recvfrom net/socket.c:2260 [inline] __se_sys_recvfrom net/socket.c:2256 [inline] __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253 netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317 netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351 nlmsg_unicast include/net/netlink.h:1144 [inline] nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610 rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741 rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline] tcf_add_notify net/sched/act_api.c:2048 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: __nla_put lib/nlattr.c:1041 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1099 tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251 tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628 tcf_add_notify_msg net/sched/act_api.c:2023 [inline] tcf_add_notify net/sched/act_api.c:2042 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netli ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: erspan: make sure erspan_base_hdr is present in skb->head syzbot reported a problem in ip6erspan_rcv() [1] Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make sure erspan_base_hdr is present in skb linear part (skb->head) before getting @ver field from it. Add the missing pskb_may_pull() calls. v2: Reload iph pointer in erspan_rcv() after pskb_may_pull() because skb->head might have changed. [1] BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline] BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] pskb_may_pull include/linux/skbuff.h:2756 [inline] ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652 netif_receive_skb_internal net/core/dev.c:5738 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5798 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549 tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1525 [inline] tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g962490525cff #0Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix information leak in btrfs_ioctl_logical_to_ino() Syzbot reported the following information leak for in btrfs_ioctl_logical_to_ino(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x110 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: __kmalloc_large_node+0x231/0x370 mm/slub.c:3921 __do_kmalloc_node mm/slub.c:3954 [inline] __kmalloc_node+0xb07/0x1060 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] kvmalloc_node+0xc0/0x2d0 mm/util.c:634 kvmalloc include/linux/slab.h:766 [inline] init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779 btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 40-65535 of 65536 are uninitialized Memory access of size 65536 starts at ffff888045a40000 This happens, because we're copying a 'struct btrfs_data_container' back to user-space. This btrfs_data_container is allocated in 'init_data_container()' via kvmalloc(), which does not zero-fill the memory. Fix this by using kvzalloc() which zeroes out the memory on allocation.Show less