Use of Uninitialized Resource

In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix channel survey memory allocation size KASAN reported a memory allocation issue in wcn->chan_survey due to incorrect size calculation. This commit uses kcalloc to allocate memory for wcn->chan_survey, ensuring proper initialization and preventing the use of uninitialized values when there are no frames on the channel.Show less

In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean)Show less

In the Linux kernel, the following vulnerability has been resolved: tick/nohz: unexport __init-annotated tick_nohz_full_setup() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it had been broken for a decade. Commit 28438794aba4 ("modpost: fix section mismatch check for exported init/exit sections") fixed it so modpost started to warn it again, then this showed up: MODPOST vmlinux.symvers WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup() The symbol tick_nohz_full_setup is exported and annotated __init Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export. Drop the export because tick_nohz_full_setup() is only called from the built-in code in kernel/sched/isolation.c.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix uninit-value in mpol_rebind_policy() mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy().Show less

In the Linux kernel, the following vulnerability has been resolved: regulator: da9121: Fix uninit-value in da9121_assign_chip_model() KASAN report slab-out-of-bounds in __regmap_init as follows: BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841 Read of size 1 at addr ffff88803678cdf1 by task xrun/9137 CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88 print_report.cold+0xcd/0x69b mm/kasan/report.c:313 kasan_report+0x8e/0xc0 mm/kasan/report.c:491 __regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841 __devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266 __devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394 da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039 i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563 This happend when da9121 device is probe by da9121_i2c_id, but with invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later da9121_assign_chip_model() will access 'regmap' without init it. Fix it by return -EINVAL from da9121_assign_chip_model() if 'chip->subvariant_id' is invalid.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Prevent use of lock before it is initialized If there is a failure during probe of hfi1 before the sdma_map_lock is initialized, the call to hfi1_free_devdata() will attempt to use a lock that has not been initialized. If the locking correctness validator is on then an INFO message and stack trace resembling the following may be seen: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Call Trace: register_lock_class+0x11b/0x880 __lock_acquire+0xf3/0x7930 lock_acquire+0xff/0x2d0 _raw_spin_lock_irq+0x46/0x60 sdma_clean+0x42a/0x660 [hfi1] hfi1_free_devdata+0x3a7/0x420 [hfi1] init_one+0x867/0x11a0 [hfi1] pci_device_probe+0x40e/0x8d0 The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map memory, and sdma_map is not allocated/initialized until after sdma_map_lock has been initialized. This code only needs to be run if sdma_map is not NULL, and so checking for that condition will avoid trying to use the lock before it is initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix free of uninitialized nfs4_label on referral lookup. Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86bShow less

In the Linux kernel, the following vulnerability has been resolved: tipc: check attribute length for bearer name syzbot reported uninit-value: ===================================================== BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline] BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:644 [inline] string+0x4f9/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50 _printk+0x18d/0x1cf kernel/printk/printk.c:2293 tipc_enable_bearer net/tipc/bearer.c:371 [inline] __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] - Do sanity check the attribute length for TIPC_NLA_BEARER_NAME. - Do not use 'illegal name' in printing message.Show less

In the Linux kernel, the following vulnerability has been resolved: net: mdio: unexport __init-annotated mdio_bus_init() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean)Show less

In the Linux kernel, the following vulnerability has been resolved: rtl818x: Prevent using not initialized queues Using not existing queues can panic the kernel with rtl8180/rtl8185 cards. Ignore the skb priority for those cards, they only have one tx queue. Pierre Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum: https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html He also confirmed that this patch fixes the issue. In summary this happened: After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a "divide error: 0000" when connecting to an AP. Control port tx now tries to use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in 2.10. Since only the rtl8187se part of the driver supports QoS, the priority of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185 cards. rtl8180 is then unconditionally reading out the priority and finally crashes on drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this patch: idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries "ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in usb_read8() and friends When r8712_usbctrl_vendorreq() returns negative, 'data' in usb_read{8,16,32} will not be initialized. BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline] BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:643 [inline] string+0x4ec/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 va_format lib/vsprintf.c:1704 [inline] pointer+0x18e6/0x1f70 lib/vsprintf.c:2443 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604 dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615 __dev_printk+0x3be/0x440 drivers/base/core.c:4627 _dev_info+0x1ea/0x22f drivers/base/core.c:4673 r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5363 [inline] hub_port_connect_change drivers/usb/core/hub.c:5507 [inline] port_event drivers/usb/core/hub.c:5665 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289 worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436 kthread+0x3c7/0x500 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Local variable data created at: usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33 r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8Show less

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in r871xu_drv_init() When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0, 'mac[6]' will not be initialized. BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5358 [inline] hub_port_connect_change drivers/usb/core/hub.c:5502 [inline] port_event drivers/usb/core/hub.c:5660 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454 kthread+0x3c7/0x500 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 Local variable mac created at: r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix crash when mount with quota enabled There is a reported crash when mounting ocfs2 with quota enabled. RIP: 0010:ocfs2_qinfo_lock_res_init+0x44/0x50 [ocfs2] Call Trace: ocfs2_local_read_info+0xb9/0x6f0 [ocfs2] dquot_load_quota_sb+0x216/0x470 dquot_load_quota_inode+0x85/0x100 ocfs2_enable_quotas+0xa0/0x1c0 [ocfs2] ocfs2_fill_super.cold+0xc8/0x1bf [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x465/0xac0 __x64_sys_mount+0x103/0x140 It is caused by when initializing dqi_gqlock, the corresponding dqi_type and dqi_sb are not properly initialized. This issue is introduced by commit 6c85c2c72819, which wants to avoid accessing uninitialized variables in error cases. So make global quota info properly initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction") while 'deferrable' flag can be uninitialized for non-control/notify AV/C transactions. UBSAN reports it: kernel: ================================================================================ kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9 kernel: load of value 158 is not a valid value for type '_Bool' kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P OE 5.15.0-18-generic #18-Ubuntu kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019 kernel: Call Trace: kernel: <IRQ> kernel: show_stack+0x52/0x58 kernel: dump_stack_lvl+0x4a/0x5f kernel: dump_stack+0x10/0x12 kernel: ubsan_epilogue+0x9/0x45 kernel: __ubsan_handle_load_invalid_value.cold+0x44/0x49 kernel: fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib] kernel: fcp_response+0x28/0x30 [snd_firewire_lib] kernel: fw_core_handle_request+0x230/0x3d0 [firewire_core] kernel: handle_ar_packet+0x1d9/0x200 [firewire_ohci] kernel: ? handle_ar_packet+0x1d9/0x200 [firewire_ohci] kernel: ? transmit_complete_callback+0x9f/0x120 [firewire_core] kernel: ar_context_tasklet+0xa8/0x2e0 [firewire_ohci] kernel: tasklet_action_common.constprop.0+0xea/0xf0 kernel: tasklet_action+0x22/0x30 kernel: __do_softirq+0xd9/0x2e3 kernel: ? irq_finalize_oneshot.part.0+0xf0/0xf0 kernel: do_softirq+0x75/0xa0 kernel: </IRQ> kernel: <TASK> kernel: __local_bh_enable_ip+0x50/0x60 kernel: irq_forced_thread_fn+0x7e/0x90 kernel: irq_thread+0xba/0x190 kernel: ? irq_thread_fn+0x60/0x60 kernel: kthread+0x11e/0x140 kernel: ? irq_thread_check_affinity+0xf0/0xf0 kernel: ? set_kthread_struct+0x50/0x50 kernel: ret_from_fork+0x22/0x30 kernel: </TASK> kernel: ================================================================================ This commit fixes the bug. The bug has no disadvantage for the non- control/notify AV/C transactions since the flag has an effect for AV/C response with INTERIM (0x0f) status which is not used for the transactions in AV/C general specification.Show less

In the Linux kernel, the following vulnerability has been resolved: ath9k_htc: fix uninit value bugs Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing field initialization. In htc_connect_service() svc_meta_len and pad are not initialized. Based on code it looks like in current skb there is no service data, so simply initialize svc_meta_len to 0. htc_issue_send() does not initialize htc_frame_hdr::control array. Based on firmware code, it will initialize it by itself, so simply zero whole array to make KMSAN happy Fail logs: BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 4-7 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 16-17 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.Show less

In the Linux kernel, the following vulnerability has been resolved: ath11k: pci: fix crash on suspend if board file is not found Mario reported that the kernel was crashing on suspend if ath11k was not able to find a board file: [ 473.693286] PM: Suspending system (s2idle) [ 473.693291] printk: Suspending console(s) (use no_console_suspend to debug) [ 474.407787] BUG: unable to handle page fault for address: 0000000000002070 [ 474.407791] #PF: supervisor read access in kernel mode [ 474.407794] #PF: error_code(0x0000) - not-present page [ 474.407798] PGD 0 P4D 0 [ 474.407801] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 474.407805] CPU: 2 PID: 2350 Comm: kworker/u32:14 Tainted: G W 5.16.0 #248 [...] [ 474.407868] Call Trace: [ 474.407870] <TASK> [ 474.407874] ? _raw_spin_lock_irqsave+0x2a/0x60 [ 474.407882] ? lock_timer_base+0x72/0xa0 [ 474.407889] ? _raw_spin_unlock_irqrestore+0x29/0x3d [ 474.407892] ? try_to_del_timer_sync+0x54/0x80 [ 474.407896] ath11k_dp_rx_pktlog_stop+0x49/0xc0 [ath11k] [ 474.407912] ath11k_core_suspend+0x34/0x130 [ath11k] [ 474.407923] ath11k_pci_pm_suspend+0x1b/0x50 [ath11k_pci] [ 474.407928] pci_pm_suspend+0x7e/0x170 [ 474.407935] ? pci_pm_freeze+0xc0/0xc0 [ 474.407939] dpm_run_callback+0x4e/0x150 [ 474.407947] __device_suspend+0x148/0x4c0 [ 474.407951] async_suspend+0x20/0x90 dmesg-efi-164255130401001: Oops#1 Part1 [ 474.407955] async_run_entry_fn+0x33/0x120 [ 474.407959] process_one_work+0x220/0x3f0 [ 474.407966] worker_thread+0x4a/0x3d0 [ 474.407971] kthread+0x17a/0x1a0 [ 474.407975] ? process_one_work+0x3f0/0x3f0 [ 474.407979] ? set_kthread_struct+0x40/0x40 [ 474.407983] ret_from_fork+0x22/0x30 [ 474.407991] </TASK> The issue here is that board file loading happens after ath11k_pci_probe() succesfully returns (ath11k initialisation happends asynchronously) and the suspend handler is still enabled, of course failing as ath11k is not properly initialised. Fix this by checking ATH11K_FLAG_QMI_FAIL during both suspend and resume. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2Show less

In DA, there is a possible read of uninitialized heap data due to uninitialized data. This could lead to local information disclosure, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS09291449; Issue ID: MSV-2066.Show less

In BnAudioPolicyService::onTransact of IAudioPolicyService.cpp, there is a possible information disclosure due to uninitialized data. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Show less