Memory Allocation with Excessive Size Value

Vector is a high-performance observability data pipeline. From 0.15.0 until 0.57.0, the logstash source reads a 32-bit compressed-frame length from the network and uses it to size an in-memory buffer without an upper bound. An unauthenticated remote peer that can reach the default 0.0.0.0:5044 listener can send a minimal frame declaring a multi-gigabyte payload, causing an excessive allocation that can abort Vector or invoke the host OOM killer. Because the allocation follows the declared length rather than bytes transmitted, the attacker has low resource cost, and process termination can halt log ingestion for every tenant on a shared pipeline. This issue is fixed in version 0.57.0.Show less

vLLM through 0.29.0 fails to validate the tp_size parameter in kv_transfer_params on OpenAI-compatible completion endpoints, allowing attackers to allocate unbounded memory. Attackers can supply arbitrary tp_size values in prefill/decode disaggregated deployments to exhaust memory and trigger kernel OOM-kill of the decode worker process.Show less

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.0.0 until 1.21.2, 1.22.2, and 1.23.1, Reader.Read in pkg/viaduct/pkg/packer trusts the 32-bit PackageHeader.PayloadLen received through the CloudHub viaduct message-processing path and allocates that amount of memory before validating an upper bound. An authenticated malicious or compromised edge peer can repeatedly send crafted headers with excessive declared lengths, causing memory exhaustion, CloudHub process termination or restart loops, and temporary disruption of cloud-edge communication. This issue does not provide unauthenticated access or direct code execution. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1.Show less

The CompressionFilter class uses ZLib to deflate and inflate data sent and received. When we inflate incoming data, the filter does not control the resulting size, and create a buffer no matter what. Some compressed data may have a compression ration greater than 1 thousand, leading to an exhaustion of the application memory, as we don't control the deflated size. The fix adds such a control by allowing the application developer to provide a fixed size limit, which when reached throws an exception. It also allows the user to provide a compression ratio that should not be exceeded, protected the application from small inflated files that inflate in gigantic files, but with a grace limit for the resulting size (1Mb) to avoid false positive (like a very small file inflating with a high ratio, but resulting with a acceptable size, like a few thousands bytes) For application using this feature, it is highly recommended to create the CompressionFilter and to pass the maximum limit as a forth constructor parameter, maxDecompressedSize: public CompressionFilter(final boolean compressInbound, final boolean compressOutbound, final int compressionLevel, final int maxDecompressedSize)Optionally one can also provide a maxDecompressRatio fifth parameter, and a decompressRatioMinSize sixth parameter to allow small inflated files with a high compression ratio to still be accepted. Here are the additional constructor: public CompressionFilter(final boolean compressInbound, final boolean compressOutbound, final int compressionLevel, final int maxDecompressedSize, final long maxDecompressRatio, final long decompressRatioMinSize) Also note that a fluent API has been added to spare the users the pain to call a constructor with that many parameters:  CompressionFilter compressionFilter = new CompressionFilter()     .setCompressionLevel(Zlib.COMPRESSION_MAX)   .setMaxDecompressedSize(1_000_000)   .setMaxDecompressRatio(100).   .setDecompressRatioMinSize(100_000);  Applications using Apache MINA are advised to upgrade and configure their CompressionFilter instance.Show less

adm-zip is a JavaScript library for creating and extracting ZIP archives in Node.js. Prior to 0.6.1, getData() in zipEntry.js trusts an entry's central-directory uncompressed size and allocates output memory before validating that value against the actual compressed data and decompression result. A small crafted ZIP can declare a multi-gigabyte uncompressed size, causing Buffer.alloc and decompression handling to commit excessive resident memory before CRC validation reports an error. Applications that read entries from untrusted archives can therefore be terminated by the operating system or suffer service-wide memory exhaustion. This issue is fixed in version 0.6.1.Show less

Imager versions before 1.036 for Perl exit the process reading a TGA with a colour map length of 32768 or more in tga_palette_read. The reader unpacks the two-byte colour map length into a signed short, so a length of 32768 or more becomes negative. tga_palette_read() casts that value to size_t and asks mymalloc() for a size near SIZE_MAX. The allocation fails and Imager's allocator calls exit(3). Reading an attacker-supplied file through Imager->read() triggers an uncatchable exit.Show less

A vulnerability has been found in O-RAN-SC SMO OAM 2025-06-10. Affected is an unknown function of the component VES Collector. Such manipulation of the argument additionalFields.padding leads to uncontrolled memory allocation. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through a bug report but has not responded yet.Show less

ExifReader is a JavaScript Exif information parser. Prior to 4.41.1, ExifReader parses attacker-controlled HEIC or AVIF ISO-BMFF files in getItems() within src/image-header-iso-bmff-iloc.js and trusts iloc itemCount and extentCount values while allocating an extent object for every nested-loop iteration. When offsetSize, lengthSize, baseOffsetSize, and indexSize are zero, the extent fields consume no input bytes and the buffer offset does not advance, but the parser can still allocate up to itemCount multiplied by extentCount objects without an allocation budget. A small malicious iloc box can therefore cause hundreds of megabytes of heap growth or exhaust system memory, terminating a Node.js process and denying service to web, desktop, or mobile applications that parse untrusted images. The zero field widths are valid ISO-BMFF values indicating absent fields, so the vulnerable parser must bound work rather than relying on offset advancement. The issue is fixed in version 4.41.1.Show less

A vulnerability in the sftunnel inter-device communication protocol of Cisco Secure FMC Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to exhaust the available memory of an affected device. This vulnerability is due to improper management of memory resources during sftunnel TLS connection setup. An attacker could exploit this vulnerability by sending crafted sftunnel TLS frames to an affected device during the connection setup. A successful exploit could allow the attacker to exhaust the available memory on the affected device, which could result in a DoS condition.Show less

RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, Channel.recvContent in channel.go preallocates the message body slice with the uint64 ch.header.Size value supplied by an AMQP content header without capping the allocation to the negotiated Connection.Config.FrameSize value. A malicious or compromised broker can send an extreme declared body size and cause the Go runtime to attempt a correspondingly large allocation before body data is received. The allocation can exhaust memory and terminate the client process. This issue is fixed in version 1.13.0.Show less

Vouch Proxy is an SSO and OAuth/OIDC login solution for Nginx using the auth_request module. Prior to 0.48.0, Cookie in pkg/cookie/cookie.go parses the total part count from an attacker-controlled multipart cookie name and passes the value to make([]string, numParts) without checking that the value is positive or reasonably bounded. Requests to /validate and /_external-auth-:id reach JWTCacheHandler in pkg/jwtmanager/jwtcache.go, FindJWT in pkg/jwtmanager/jwtmanager.go, and the vulnerable cookie reassembly before JWT validation, so no account or valid session is required. A cookie name such as VouchCookie_1of10000000000 causes an attempted slice allocation of roughly 160 GB and a fatal Go runtime out-of-memory condition, allowing one request to crash the authentication proxy and repeated requests to sustain unavailability. This vulnerability is fixed in 0.48.0.Show less

GNU libextractor before 1.15 contains a stack-based buffer overflow vulnerability in the process_star_office function that sizes a variable-length stack array from attacker-controlled OLE2 stream data. Attackers can craft malicious StarOffice documents that allocate up to 4 MB on the stack, causing stack overflow and crashing any application extracting metadata from the document.Show less

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, getFileFromGZ in internal/wasm/httpfetcher.go calls io.ReadAll on a gzip.Reader without limiting decompressed output when a tenant-controlled EnvoyExtensionPolicy.spec.wasm[].code.http.url points to a reachable compressed Wasm payload. The 256 MiB compressed-input cap does not constrain the expanded size, no operator Wasm URL allowlist exists, and the optional sha256 check occurs only after decompression, so a comparatively small gzip stream can force a multi-gigabyte allocation in the shared controller. The resulting out-of-memory termination restarts the controller, re-reconciles the persistent custom resource, and can create a persistent cross-tenant control-plane outage. This issue is fixed in versions 1.7.4 and 1.8.1.Show less

Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, internal/wasm/imagefetcher.go follows tenant-controlled EnvoyExtensionPolicy spec.wasm[].code.image.url values to Docker or OCI Wasm layers, and extractWasmPluginBinary uses the untrusted tar-header h.Size value to allocate memory before validating the entry name or declared size. A small PAX or GNU tar header can therefore claim a multi-terabyte entry even though the surrounding LimitReader restricts only the bytes read from the stream, and no registry allowlist prevents a permitted tenant from selecting an attacker-controlled registry that the controller can reach. The allocation is attempted for every tar entry and can cause an unrecoverable Go runtime out-of-memory failure; because the custom resource persists, reconciliation repeatedly crash-loops the shared controller and causes a single-request, non-volumetric, cluster-wide control-plane denial of service. This issue is fixed in versions 1.7.4 and 1.8.1.Show less

Description The worker's Netty message decoder is installed ahead of the SASL authentication handlers in the pipeline and acts on frames before any authentication has taken place. It allocated buffers sized from a length field carried in the frame, so a single frame from an unauthenticated peer able to reach a worker slot port could drive a large allocation. `storm.messaging.netty.authentication` defaults to false, and the decoder runs before the handler that enforces it in any case, so no credentials are required. The attacker needs only TCP reachability to a worker port. The effect of a single frame at the default 768 MB worker heap has not been measured to distinguish sustained worker loss from transient garbage-collection pressure. The severity assigned to this advisory reflects the more conservative reading; consumers who require a precise figure should test against their own worker heap configuration. Mitigation Upgrade to 3.1.0, where frames are decoded only after the handshake completes. Users who cannot upgrade immediately should ensure that worker slot ports are reachable only from within the cluster, as the security model already recommends, and should enable `storm.messaging.netty.authentication` where the deployment permits it. Credit The ASF -- found using Claude agents to study the security of open-source projects, validated and reported by Apache Storm.Show less

OOM Denial of Service via Unbounded Map Pre-Sizing in Apache OpenNLP SymSpellModelSerializer Versions Affected: - 3.0.0-M4 - 3.0.0-M5 (The opennlp-spellcheck extension was introduced in 3.0.0-M4. Releases 1.x and 2.x do not contain the affected code.) Description: The SymSpellModelSerializer.create() method reads two 32-bit signed integer count fields (unigramCount and bigramCount) from a binary SymSpell model stream and passes each value directly to LinkedHashMap.newLinkedHashMap() after validating only that it is non-negative. No upper bound is applied, so the count is fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which either count field is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) causes the map to be pre-sized to a capacity of 2^30 entries. The oversized backing array is allocated on the first put() into that map, requesting 4–8 GB depending on whether compressed oops are in effect, and the load fails with an OutOfMemoryError. Because the count fields sit immediately after a fixed-size header (magic, format version, three UTF strings, the configuration fields, and the edit-distance identifier) the attacker pays no meaningful size cost to weaponize a payload: a file of well under 100 bytes plus a single real entry is sufficient to crash a JVM that loads it. Any code path that deserializes a SymSpell model is affected, including SymSpellModels.deserialize(InputStream), SymSpellModels.fromBytes(byte[]), classpath model loading via SymSpellModelResolver.resolveByLanguage(String), the CorrectTextTool command-line tool, and model-archive loading through the registered ArtifactSerializer. The opennlp-spellcheck extension ships in the official OpenNLP binary distribution. The practical impact is denial of service against processes that load SymSpell model files from untrusted or semi-trusted origins. Mitigation: - 3.x users should upgrade to 3.0.0-M6. Note: The fix applies an upper bound to both count fields, checked before the map is pre-sized; counts that are negative or exceed the bound cause an IOException to be thrown and the read to fail fast with no large allocation. The bound is the existing AbstractModelReader.MAX_ENTRIES limit introduced earlie, which the current change promotes to public visibility so that serializers implementing their own binary format can share it. The default bound is 10,000,000, which is well above the entry counts of legitimate SymSpell dictionaries but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load larger dictionaries can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Note that this property is shared with the model-reader limit and raising it relaxes both. Users who cannot upgrade immediately should treat all SymSpell .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks.Show less

The nscd service in the GNU C Library 2.3.4 onwards may crash due to a stack overflow when a malicious DNS server returns too large a response for a DNS query, resulting in degraded DNS resolution for the system. Exploitation of this bug needs a system that has nscd enabled and using an untrusted DNS server for name resolution, with the compromised DNS server being capable of processing records large enough to result in a stack overflow in an nscd thread stack.  During experimentation, bind 9 was unable to handle large records, but that could change in future or with a different name server.  In typical installations, nscd is executed in an isolated context as its own user without a shell, due to which any compromise of that service is isolated. There is a remote possibility of nscd cache corruption if an attacker manages to get the stack pointer into a desired point in the heap, potentially resulting in other caches in nscd being overwritten with corrupt data through the stack overflow, until the buggy code path eventually results in a crash. Finally, a crash in nscd may result in performance degradation when resolving names, but it does not result in a denial of service.Show less

rclone is a command-line program to sync files and directories to and from different cloud storage providers. From 1.75.0 until 1.75.1, the serve S3 streamed multipart path in cmd/serve/s3/multipart.go passes attacker-controlled contentLength to multipart.NewRW().Reserve before reading request-body bytes. waitForTurn admits the current part and one oversized part when the buffer is empty despite --multipart-streaming-buffer-limit, and lib/pool allocates 1 MiB pages according to Content-Length or X-Amz-Decoded-Content-Length. A network client can retain or multiply these reservations without sending the declared body, exhausting process or host memory or permanently blocking request handlers. Anonymous S3 deployments require no credentials, while deployments using auth_key require an accepted S3 key. This issue is fixed in version 1.75.1.Show less

A user could provide an expression whose string length is longer than the ParserExpressionSizeLimit() configured on the CEL environment, and a memory allocation would occur proportional to the size of the input before the limit would be checked / enforced.Show less

KeePass versions 2.35 through 2.61.1 fail to validate KDBX header field sizes before memory allocation in the ReadHeaderField function. Attackers can craft a malicious KDBX file declaring excessive header field lengths to trigger allocation of gigabytes of memory, causing the application to consume resources and terminate.Show less