Memory Allocation with Excessive Size Value

A vulnerability in the Link Layer Discovery Protocol (LLDP) feature for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, adjacent attacker to cause a memory leak, which could result in an unexpected reload of the device. This vulnerability is due to incorrect error checking when parsing ingress LLDP packets. An attacker could exploit this vulnerability by sending a steady stream of crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause a memory leak, which could result in a denial of service (DoS) condition when the device unexpectedly reloads. Note: This vulnerability cannot be exploited by transit traffic through the device. The crafted LLDP packet must be targeted to a directly connected interface, and the attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). In addition, the attack surface for this vulnerability can be reduced by disabling LLDP on interfaces where it is not required.Show less

A vulnerability was found in docconv up to 1.2.0 and classified as problematic. This issue affects the function ConvertDocx/ConvertODT/ConvertPages/ConvertXML/XMLToText. The manipulation leads to uncontrolled memory allocation. The attack may be initiated remotely. Upgrading to version 1.2.1 is able to address this issue. The name of the patch is 42bcff666855ab978e67a9041d0cdea552f20301. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-216779.Show less

In VxLAN scenarios on EX4300-MP, EX4600, QFX5000 Series devices an Uncontrolled Memory Allocation vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated adjacently located attacker sending specific packets to cause a Denial of Service (DoS) condition by crashing one or more PFE's when they are received and processed by the device. Upon automatic restart of the PFE, continued processing of these packets will cause the memory leak to reappear. Depending on the volume of packets received the attacker may be able to create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on EX4300-MP, EX4600, QFX5000 Series: 17.1 version 17.1R1 and later versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S7, 19.2R3-S1; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Junos OS versions prior to 17.1R1.Show less

A security vulnerability has been identified in Apache Kafka. It affects all releases since 2.8.0. The vulnerability allows malicious unauthenticated clients to allocate large amounts of memory on brokers. This can lead to brokers hitting OutOfMemoryException and causing denial of service. Example scenarios: - Kafka cluster without authentication: Any clients able to establish a network connection to a broker can trigger the issue. - Kafka cluster with SASL authentication: Any clients able to establish a network connection to a broker, without the need for valid SASL credentials, can trigger the issue. - Kafka cluster with TLS authentication: Only clients able to successfully authenticate via TLS can trigger the issue. We advise the users to upgrade the Kafka installations to one of the 3.2.3, 3.1.2, 3.0.2, 2.8.2 versions.Show less

Binary provides encoding/decoding in Borsh and other formats. The vulnerability is a memory allocation vulnerability that can be exploited to allocate slices in memory with (arbitrary) excessive size value, which can either exhaust available memory or crash the whole program. When using `github.com/gagliardetto/binary` to parse unchecked (or wrong type of) data from untrusted sources of input (e.g. the blockchain) into slices, it's possible to allocate memory with excessive size. When `dec.Decode(&val)` method is used to parse data into a structure that is or contains slices of values, the length of the slice was previously read directly from the data itself without any checks on the size of it, and then a slice was allocated. This could lead to an overflow and an allocation of memory with excessive size value. Users should upgrade to `v0.7.1` or higher. A workaround is not to rely on the `dec.Decode(&val)` function to parse the data, but to use a custom `UnmarshalWithDecoder()` method that reads and checks the length of any slice.Show less

The CODESYS Gateway Server V2 does not verifiy that the size of a request is within expected limits. An unauthenticated attacker may allocate an arbitrary amount of memory, which may lead to a crash of the Gateway due to an out-of-memory condition.Show less

A vulnerability in the NETCONF process of Cisco SD-WAN vEdge Routers could allow an authenticated, local attacker to cause an affected device to run out of memory, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient memory management when an affected device receives large amounts of traffic. An attacker could exploit this vulnerability by sending malicious traffic to an affected device. A successful exploit could allow the attacker to cause the device to crash, resulting in a DoS condition.Show less

An Uncontrolled Memory Allocation vulnerability leading to a Heap-based Buffer Overflow in the packet forwarding engine (PFE) of Juniper Networks Junos OS allows a network-based unauthenticated attacker to flood the device with traffic leading to a Denial of Service (DoS). The device must be configured with storm control profiling limiting the number of unknown broadcast, multicast, or unicast traffic to be vulnerable to this issue. This issue affects: Juniper Networks Junos OS on QFX5100/QFX5110/QFX5120/QFX5200/QFX5210/EX4600/EX4650 Series; 20.2 version 20.2R1 and later versions prior to 20.2R2. This issue does not affect: Juniper Networks Junos OS versions prior to 20.2R1.Show less

A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainerShow less

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3-49160. An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of user-supplied data, which can result in an uncontrolled memory allocation. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13797.Show less

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3-49160. An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of user-supplied data, which can result in an uncontrolled memory allocation. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13712.Show less

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3-49160. An attacker must first obtain the ability to execute high-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of user-supplied data, which can result in an uncontrolled memory allocation. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13672.Show less

This vulnerability allows local attackers to escalate privileges on affected installations of Parallels Desktop 16.1.3 (49160). An attacker must first obtain the ability to execute low-privileged code on the target guest system in order to exploit this vulnerability. The specific flaw exists within the Toolgate component. The issue results from the lack of proper validation of user-supplied data, which can result in an uncontrolled memory allocation. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of the hypervisor. Was ZDI-CAN-13544.Show less

A vulnerability in Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to uncontrolled memory allocation. An attacker could exploit this vulnerability by copying a crafted file to a specific folder on the system. A successful exploit could allow the attacker to crash the VPN Agent service when the affected application is launched, causing it to be unavailable to all users of the system. To exploit this vulnerability, the attacker must have valid credentials on a multiuser Windows system.Show less

An unauthenticated specially crafted packet sent by an attacker over the network will cause a denial-of-service (DoS) vulnerability. Vulnerability allows attacker to stop the PLC. After stopping (ERR LED flashing red), physical access to the PLC is required in order to restart the application. This issue affects: ABB AC500 V2 products with onboard Ethernet version 2.8.4 and prior versions.Show less

A vulnerability in the logging subsystem of Cisco Data Center Network Manager (DCNM) could allow an authenticated, local attacker to view sensitive information in a system log file that should be restricted. The vulnerability exists because sensitive information is not properly masked before it is written to system log files. An attacker could exploit this vulnerability by authenticating to an affected device and inspecting a specific system log file. A successful exploit could allow the attacker to view sensitive information in the system log file. To exploit this vulnerability, the attacker would need to have valid user credentials.Show less