Memory Allocation with Excessive Size Value

In Eclipse Ankaios versions 0.1.0 through 1.0.1, the agent does not limit the length declared by a workload in a length-delimited protobuf message received through the Control Interface FIFO. A workload granted Control Interface access can specify an excessive message length, causing an unbounded memory allocation that may abort the Ankaios agent process. This results in loss of orchestration services for workloads managed by the affected agent.Show less

A client may send a WebSocket frame with an unknown opcode and a very large declared payload length, causing Jetty to attempt a large memory allocation and potentially exhaust the JVM heap. This occurs when auto-fragmentation is enabled, as unknown opcodes bypass the normal maximum frame size handling and payload allocation occurs before the opcode is validated.Show less

MOOS-IvP through 24.8.1 contains a denial of service vulnerability in the Demuxer::addMuxPacket() function that trusts the packet count declared in mux headers without validation. Attackers can declare arbitrarily large packet counts to trigger unbounded memory allocation, exhausting system resources and causing service unavailability.Show less

MOOS core-moos through 10.4.0 fails to validate packet length declarations in CMOOSCommPkt::OnBytesWritten(), allowing unauthenticated attackers to trigger unbounded buffer allocation by sending crafted wire packets. Attackers can send packets with large declared lengths to exhaust server memory and cause denial of service before client authentication completes.Show less

A weakness has been identified in RightNow-AI OpenFang up to 0.6.9. This vulnerability affects the function shell_exec of the file crates/openfang-runtime/src/tool_runner.rs. This manipulation causes uncontrolled memory allocation. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A flaw has been found in sigoden aichat up to 0.30.4. This affects an unknown function of the file src/serve.rs of the component API Endpoint. This manipulation causes uncontrolled memory allocation. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was found in NousResearch hermes-agent up to 0.18.2. This vulnerability affects the function list_tools of the file tools/mcp_tool.py of the component MCP Tool. Performing a manipulation results in uncontrolled memory allocation. It is possible to initiate the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

openssl_encrypt before 1.4.9 fails to validate the total field from QR JSON payloads before materializing ranges. Attackers can supply crafted QR images with extremely large total values to trigger unbounded memory allocation and cause denial of service through out-of-memory conditions.Show less

openssl_encrypt (pip: openssl-encrypt) versions 1.4.8 and earlier fail to validate the 36-bit STREAMINFO total_samples field of FLAC files before using it to size an allocation (np.random.randint(size=(total_samples, channels))). A ~50-byte crafted FLAC file declaring ~100 million samples causes a multi-gigabyte memory allocation, leading to out-of-memory denial of service during 'decrypt --stego-extract'. The issue is fixed in 1.4.9; both the 1.4.x and 1.5.x lines are affected.Show less

kin-openapi is a Go project for handling OpenAPI files. From 0.124.0 until 0.142.0, openapi3filter.sliceMapToSlice in openapi3filter/req_resp_decoder.go converts attacker-controlled sparse indexes from a deepObject query parameter into a dense slice by allocating entries from zero through the largest supplied index, after which buildResObj creates another slice of the same length. This allocation occurs before schema validation, so maxItems does not prevent it. An unauthenticated client can send a small query such as param[items][50000000]=x to an endpoint whose deepObject schema contains an array, forcing multi-gigabyte heap allocation and causing an OOM kill or restart loop. Other request-body encodings and styled parameters that do not produce bracketed integer indexes are not affected. This issue is fixed in version 0.142.0.Show less

Wazuh is a free and open source platform used for threat prevention, detection, and response. From 3.9.0 until 4.14.5 and 5.0.0-beta2, the Wazuh cluster protocol in framework/wazuh/core/cluster/common.py allows an authenticated cluster node to exhaust memory on the master. The receive_str() method accepts an attacker-controlled total for InBuffer without a maximum, so a new_str command can request a multi-gigabyte bytearray and repeated requests accumulate in in_str. The divided-message path also retains flag_divided fragments under unique counters in div_msg_box without a count, aggregate-size, or expiration limit. Exploitation can disrupt agent connectivity and alert processing across the monitored environment. This issue is fixed in versions 4.14.5 and 5.0.0-beta2.Show less

Uncontrolled memory allocation in the binary Ion stream cursor in Amazon ion-java before 1.12.0 might allow remote actors to cause a denial of service via a crafted Ion binary document containing a declared-length field that causes excessive heap preallocation. To remediate this issue, users should upgrade to version 1.12.0.Show less

The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java uses ValueReader.readBytes to accept a wire-declared contentLength below Integer.MAX_VALUE and allocate a byte array before checking the bytes available in the frame. A malicious AMQP peer can send a LongString or byte-array field with type tag S and a declared length such as 0x7FFFFFFE during the pre-authentication connection.start server-properties table, causing an approximately 2 GB allocation and OutOfMemoryError before readFully consumes data. The resulting memory exhaustion can terminate the JVM and cause denial of service. This issue is fixed in version 5.33.1.Show less

VP8L decoding in golang.org/x/image/vp8l can allocate an excessive amount of memory when processing a crafted VP8L image containing many unused Huffman tree groups. This allows a remote attacker to cause a denial of service via memory exhaustion.Show less

A flaw in Elasticsearch allows a low-privileged authenticated user to submit a single small request containing a forged opaque identifier. Elasticsearch decodes and deserializes the identifier before confirming that it was legitimately issued by the cluster, and a size value carried inside the identifier drives an allocation that is neither capped nor accounted for by the available memory-usage controls. The resulting out-of-memory condition is fatal and terminates the affected node process, resulting in a denial of service.Show less

Elasticsearch does not validate a size value taken from a user-supplied input before that value is used to reserve memory for an internal data structure. An authenticated user holding only read privileges can submit a single small crafted request to a product API endpoint that causes the node to attempt an excessively large allocation. The resulting memory exhaustion raises a fatal error that terminates the Elasticsearch node process, causing a denial of service for the affected node and degrading cluster health. The defect is not volumetric, so a single request is sufficient regardless of the heap size configured on the target node.Show less

Memory Allocation with Excessive Size Value (CWE-789) in the ES|QL query processing of Elasticsearch can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user able to submit ES|QL queries could send a specially crafted query whose evaluation allocates an unbounded amount of heap memory, exhausting the available heap on the receiving node and causing the node to become unavailable.Show less

Memory Allocation with Excessive Size Value (CWE-789) in Elasticsearch can lead to denial of service via Excessive Allocation (CAPEC-130). An authenticated user holding only read privileges on a single index can submit one small, specially crafted search request that causes an excessively large memory allocation, exhausting the JVM heap and terminating the affected node.Show less

Elasticsearch does not enforce an upper bound on a user-supplied count accepted by a search highlighting option, and the allocation derived from that count is not accounted against any circuit breaker. An authenticated user holding only read privileges on a single searchable index can submit one small search request that causes the node to reserve an excessively large internal data structure. The allocation occurs before the existing highlighting safety limits are evaluated, so memory exhaustion raises a fatal error that terminates the Elasticsearch node process. This results in a denial of service for the affected node and degrades cluster routing and health. The defect is not volumetric and does not depend on the size of the indexed data, so a single request is sufficient.Show less

Net::CIDR::Set versions before 0.23 for Perl allow memory exhaustion and malformed set ranges via unbounded IPv6 prefix lengths. The _encode method accepts any prefix length matching `(0|[1-9][0-9]*)` and passes it to _width2bits(), which builds the mask as `'1' x ($width + 8)`, one character per bit. The _inc() method then unpacks the packed mask into a Perl array of one scalar per byte, so the prefix length alone sets the allocation size: `::/100000000` builds a 100 MB string and a 12.5 million element array. The value being tested is parsed, not just the configured ranges: contains() builds a set from its argument, and _guess_coder() tries the IPv4 coder and then the IPv6 coder, so an IPv4-only set expands an oversized IPv6 prefix length before the mixed address width check rejects it. Any caller that passes untrusted input to contains() or add() can exhaust process memory. A prefix length above 128 is also stored as a range that does not match the requested block: 2001:db8::/129 stringifies back unchanged, contains() of its own base address returns false, and removing it from a set drops the base address while the set still prints as covering it.Show less