Out-of-bounds Write

In the Linux kernel, the following vulnerability has been resolved: net: do not pass flow_id to set_rps_cpu() Blamed commit made the assumption that the RPS table for each receive queue would have the same size, and that it would not change. Compute flow_id in set_rps_cpu(), do not assume we can use the value computed by get_rps_cpu(). Otherwise we risk out-of-bound access and/or crashes.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation.Show less

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...Show less

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00).Show less

In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced plain identification for encoded extents Only plain data whose start position and on-disk physical length are both aligned to the block size should be classified as interlaced plain extents. Otherwise, it must be treated as shifted plain extents. This issue was found by syzbot using a crafted compressed image containing plain extents with unaligned physical lengths, which can cause OOB read in z_erofs_transform_plain().Show less

In the Linux kernel, the following vulnerability has been resolved: xfs: fix freemap adjustments when adding xattrs to leaf blocks xfs/592 and xfs/794 both trip this assertion in the leaf block freemap adjustment code after ~20 minutes of running on my test VMs: ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t) + xfs_attr3_leaf_hdr_size(leaf)); Upon enabling quite a lot more debugging code, I narrowed this down to fsstress trying to set a local extended attribute with namelen=3 and valuelen=71. This results in an entry size of 80 bytes. At the start of xfs_attr3_leaf_add_work, the freemap looks like this: i 0 base 448 size 0 rhs 448 count 46 i 1 base 388 size 132 rhs 448 count 46 i 2 base 2120 size 4 rhs 448 count 46 firstused = 520 where "rhs" is the first byte past the end of the leaf entry array. This is inconsistent -- the entries array ends at byte 448, but freemap[1] says there's free space starting at byte 388! By the end of the function, the freemap is in worse shape: i 0 base 456 size 0 rhs 456 count 47 i 1 base 388 size 52 rhs 456 count 47 i 2 base 2120 size 4 rhs 456 count 47 firstused = 440 Important note: 388 is not aligned with the entries array element size of 8 bytes. Based on the incorrect freemap, the name area starts at byte 440, which is below the end of the entries array! That's why the assertion triggers and the filesystem shuts down. How did we end up here? First, recall from the previous patch that the freemap array in an xattr leaf block is not intended to be a comprehensive map of all free space in the leaf block. In other words, it's perfectly legal to have a leaf block with: * 376 bytes in use by the entries array * freemap[0] has [base = 376, size = 8] * freemap[1] has [base = 388, size = 1500] * the space between 376 and 388 is free, but the freemap stopped tracking that some time ago If we add one xattr, the entries array grows to 384 bytes, and freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we add a second xattr, the entries array grows to 392 bytes, and freemap[0] gets pushed up to [base = 392, size = 0]. This is bad, because freemap[1] hasn't been updated, and now the entries array and the free space claim the same space. The fix here is to adjust all freemap entries so that none of them collide with the entries array. Note that this fix relies on commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and the previous patch that resets zero length freemap entries to have base = 0.Show less

In the Linux kernel, the following vulnerability has been resolved: perf/arm-cmn: Reject unsupported hardware configurations So far we've been fairly lax about accepting both unknown CMN models (at least with a warning), and unknown revisions of those which we do know, as although things do frequently change between releases, typically enough remains the same to be somewhat useful for at least some basic bringup checks. However, we also make assumptions of the maximum supported sizes and numbers of things in various places, and there's no guarantee that something new might not be bigger and lead to nasty array overflows. Make sure we only try to run on things that actually match our assumptions and so will not risk memory corruption. We have at least always failed on completely unknown node types, so update that error message for clarity and consistency too.Show less

In the Linux kernel, the following vulnerability has been resolved: dlm: validate length in dlm_search_rsb_tree The len parameter in dlm_dump_rsb_name() is not validated and comes from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can cause out-of-bounds write in dlm_search_rsb_tree(). Add length validation to prevent potential buffer overflow.Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl When page reassignment was added to af_alg_pull_tsgl the original loop wasn't updated so it may try to reassign one more page than necessary. Add the check to the reassignment so that this does not happen. Also update the comment which still refers to the obsolete offset argument.Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN reports a use-after-free write of 4086 bytes in ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on a loop device. The actual bug is an out-of-bounds write past the inode block buffer, not a true use-after-free. The write overflows into an adjacent freed page, which KASAN reports as UAF. The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk id_count field to determine whether a write fits in inline data. On a corrupted filesystem, id_count can exceed the physical maximum inline data capacity, causing writes to overflow the inode block buffer. Call trace (crash path): vfs_copy_file_range (fs/read_write.c:1634) do_splice_direct splice_direct_to_actor iter_file_splice_write ocfs2_file_write_iter generic_perform_write ocfs2_write_end ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949) ocfs2_write_end_inline (fs/ocfs2/aops.c:1915) memcpy_from_folio <-- KASAN: write OOB So add id_count upper bound check in ocfs2_validate_inode_block() to alongside the existing i_size check to fix it.Show less

Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server. If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer. This issue affects Apache HTTP Server: through 2.4.66. Users are recommended to upgrade to version 2.4.67, which fixes the issue.Show less

The rtl8192cd Wi-Fi kernel driver in the Realtek rtl819x Jungle SDK (all known versions through v3.4.14B) does not perform any access control checks on the write_mem (ioctl 0x89F5) and read_mem (ioctl 0x89F6) debug handlers, which are compiled into production builds via the unconditionally defined _IOCTL_DEBUG_CMD_ macro in 8192cd_cfg.hShow less

A stack overflow vulnerability exists in the WebCam Server Login functionality of GeoVision GV-VMS V20 20.0.2. A specially crafted HTTP request can lead to an arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability. #### Stack-overflow via unconstrained sscanf The call to `sscanf` at [1] to split the `Buffer` variable into the `username` and `password` variables doesn't limit the size of the extracted content to match the destination buffers' sizes. In this case, if either the username or password decoded from the authorization string exceeds `40` characters (the size the stack variables `username` and `password`) then a stack overflow will occur. The data is controlled by an attacker, but sronger constraints (e.g. no null bytes) may make exploitation harder. A successful attack could lead to full code execution as SYSTEM on the machine running the service.Show less

A stack overflow vulnerability exists in the WebCam Server Login functionality of GeoVision GV-VMS V20 20.0.2. A specially crafted HTTP request can lead to an arbitrary code execution. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.Show less

GV-VMS V20 is a Video Monitoring Software used to gather the feeds of many surveillance cameras and manage other security devices. It is a native application accessed locally, but it is also possible to enable remote access via the "WebCam Server" feature. Once enabled, it is possible to access to the management and monitoring feature via a regular Web interface. This webersever is another native application, compiled without ASLR, which makes exploitation much easier and more likely. Most of the features require authentication before being reachable and leverage a standard login page to grant access. However the `gvapi` endpoint uses its own authentication mechanism via an `HTTP Authorization` header. It supports both `Basic` authentication and the `Digest` modes of authentication.   #### Stack-overflow via unbound copy of base64 decoded string The `b64decoder` string is sized dynamically, but it is then copied to the `Buffer` stack variable one character at the time at [0], and there's no bound-check. As such, if the decoded string is bigger than 256 characters (the size of the `Buffer` variable) then a stack overflow occurs. Because the data can be fully controlled by an attacker and lack of ASLR, this vulnerability can easily be exploited to gain full code execution as SYSTEM on the machine running the service.Show less

An off-by-one out-of-bounds write vulnerability in the bgp_flowspec_op_decode() function (bgpd/bgp_flowspec_util.c) of FRRouting (FRR) stable/10.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted FlowSpec component.Show less

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.Show less

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5).Show less