Out-of-bounds Write

HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `cram_decode_seq()` did not handle this correctly in some cases. Where this happened it could result in reading a single byte from beyond the end of a heap allocation, followed by writing a single attacker-controlled byte to the same location. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue.Show less

Buffer Overflow vulnerability in giflib v.5.2.2 allows a remote attacker to cause a denial of service via the EGifGCBToExtension overwriting an existing Graphic Control Extension block without validating its allocated size.Show less

In the Linux kernel, the following vulnerability has been resolved: gve: Fix stats report corruption on queue count change The driver and the NIC share a region in memory for stats reporting. The NIC calculates its offset into this region based on the total size of the stats region and the size of the NIC's stats. When the number of queues is changed, the driver's stats region is resized. If the queue count is increased, the NIC can write past the end of the allocated stats region, causing memory corruption. If the queue count is decreased, there is a gap between the driver and NIC stats, leading to incorrect stats reporting. This change fixes the issue by allocating stats region with maximum size, and the offset calculation for NIC stats is changed to match with the calculation of the NIC.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80Show less

Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, multiple stack-based buffer overflows exist in the Security Configuration Assessment (SCA) decoder (`wazuh-analysisd`). The use of `sprintf` with a floating-point (`%lf`) format specifier on a fixed-size 128-byte buffer allows a remote attacker to overflow the stack. A specially crafted JSON event can trigger this overflow, leading to a denial of service (crash) or potential RCE on the Wazuh manager. The vulnerability is located in `/src/analysisd/decoders/security_configuration_assessment.c`, within the `FillScanInfo` and `FillCheckEventInfo` functions. In multiple locations, a 128-byte buffer (`char value[OS_SIZE_128];`) is allocated on the stack to hold the string representation of a number from a JSON event. The code checks if the number is an integer or a double. If it's a double, it uses `sprintf(value, "%lf", ...)` to perform the conversion. This `sprintf` call is unbounded. If a floating-point number with a large exponent (e.g., `1.0e150`) is provided, `sprintf` will attempt to write its full string representation (a "1" followed by 150 zeros), which is larger than the 128-byte buffer, corrupting the stack. Version 4.14.3 patches the issue.Show less

An out‑of‑bounds write vulnerability exists in the EMF functionality of Canva Affinity. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out‑of‑bounds write, potentially leading to code execution.Show less

A weakness has been identified in Tenda AC8 up to 16.03.50.11. This vulnerability affects the function doSystemCmd of the file /goform/SysToolChangePwd of the component HTTP Endpoint. This manipulation of the argument local_2c causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.Show less

A weakness has been identified in LB-LINK BL-WR9000 2.4.9. The affected element is the function sub_44E8D0 of the file /goform/get_virtual_cfg. Executing a manipulation can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.Show less

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function cgi_myfavorite_del_user/cgi_myfavorite_verify of the file /cgi-bin/gui_mgr.cgi. Performing a manipulation results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.Show less

A security vulnerability has been detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects the function Downloads_Schedule_Info of the file /cgi-bin/download_mgr.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.Show less

A weakness has been identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this issue is the function Local_Backup_Info of the file /cgi-bin/local_backup_mgr.cgi. This manipulation of the argument f_idx causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.Show less

A vulnerability was detected in D-Link DIR-816 1.10CNB05. Affected by this vulnerability is an unknown functionality of the file /goform/form2Wl5BasicSetup.cgi of the component goahead. Performing a manipulation of the argument pskValue results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.Show less

A security vulnerability has been detected in D-Link DIR-816 1.10CNB05. Affected is an unknown function of the file /goform/form2WlanBasicSetup.cgi of the component goahead. Such manipulation of the argument pskValue leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.Show less

A weakness has been identified in D-Link DIR-816 1.10CNB05. This impacts an unknown function of the file /goform/form2Wl5RepeaterStep2.cgi of the component goahead. This manipulation of the argument key1/key2/key3/key4/pskValue causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.Show less

A security flaw has been discovered in D-Link DIR-816 1.10CNB05. This affects an unknown function of the file /goform/form2RepeaterStep2.cgi of the component goahead. The manipulation of the argument key1/key2/key3/key4/pskValue results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.Show less

GStreamer H.266 Codec Parser Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the processing of APS units. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28911.Show less

PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, The crsf_rc parser accepts an oversized variable-length known packet and copies it into a fixed 64-byte global buffer without a bounds check. In deployments where crsf_rc is enabled on a CRSF serial port, an adjacent/raw-serial attacker can trigger memory corruption and crash PX4. This vulnerability is fixed in 1.17.0-rc2.Show less

GStreamer DVB Subtitles Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the handling of coordinates. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28838.Show less

GStreamer RealMedia Demuxer Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the processing of video packets. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28845.Show less