Out-of-bounds Write

Kofax Power PDF PDF File Parsing Memory Corruption Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22931.Show less

Kofax Power PDF PDF File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22928.Show less

Kofax Power PDF PDF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22927.Show less

Kofax Power PDF PDF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22926.Show less

Kofax Power PDF PDF File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22925.Show less

Kofax Power PDF TIF File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Kofax Power PDF. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of TIF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22033.Show less

In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/Show less

In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4]Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.oShow less

In the Linux kernel, the following vulnerability has been resolved: scsi: smartpqi: Fix disable_managed_interrupts Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled. When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior. Stack Trace: [ 7.860089] scsi host2: smartpqi [ 7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0 [ 7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1 [ 7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022 [ 7.963026] Workqueue: events work_for_cpu_fn [ 7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0 [ 7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 [ 7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216 [ 7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010 [ 7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310 [ 7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00 [ 7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000 [ 7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8 [ 7.978290] FS: 0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000 [ 7.978292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0 [ 8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.172818] PKRU: 55555554 [ 8.172819] Call Trace: [ 8.172823] blk_mq_alloc_tag_set+0x12e/0x310 [ 8.264339] scsi_add_host_with_dma.cold.9+0x30/0x245 [ 8.279302] pqi_ctrl_init+0xacf/0xc8e [smartpqi] [ 8.294085] ? pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.309015] pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.323286] local_pci_probe+0x42/0x80 [ 8.337855] work_for_cpu_fn+0x16/0x20 [ 8.351193] process_one_work+0x1a7/0x360 [ 8.364462] ? create_worker+0x1a0/0x1a0 [ 8.379252] worker_thread+0x1ce/0x390 [ 8.392623] ? create_worker+0x1a0/0x1a0 [ 8.406295] kthread+0x10a/0x120 [ 8.418428] ? set_kthread_struct+0x50/0x50 [ 8.431532] ret_from_fork+0x1f/0x40 [ 8.444137] ---[ end trace 1bf0173d39354506 ]---Show less

In the Linux kernel, the following vulnerability has been resolved: afs: Increase buffer size in afs_update_volume_status() The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]Show less

In the Linux kernel, the following vulnerability has been resolved: arp: Prevent overflow in arp_req_get(). syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775) Fix access to temperature configuration registers The number of temperature configuration registers does not always match the total number of temperature registers. This can result in access errors reported if KASAN is enabled. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_coreShow less

In the Linux kernel, the following vulnerability has been resolved: dm-crypt, dm-verity: disable tasklets Tasklets have an inherent problem with memory corruption. The function tasklet_action_common calls tasklet_trylock, then it calls the tasklet callback and then it calls tasklet_unlock. If the tasklet callback frees the structure that contains the tasklet or if it calls some code that may free it, tasklet_unlock will write into free memory. The commits 8e14f610159d and d9a02e016aaf try to fix it for dm-crypt, but it is not a sufficient fix and the data corruption can still happen [1]. There is no fix for dm-verity and dm-verity will write into free memory with every tasklet-processed bio. There will be atomic workqueues implemented in the kernel 6.9 [2]. They will have better interface and they will not suffer from the memory corruption problem. But we need something that stops the memory corruption now and that can be backported to the stable kernels. So, I'm proposing this commit that disables tasklets in both dm-crypt and dm-verity. This commit doesn't remove the tasklet support, because the tasklet code will be reused when atomic workqueues will be implemented. [1] https://lore.kernel.org/all/d390d7ee-f142-44d3-822a-87949e14608b@suse.de/T/ [2] https://lore.kernel.org/lkml/20240130091300.2968534-1-tj@kernel.org/Show less

In the Linux kernel, the following vulnerability has been resolved: parisc: Fix random data corruption from exception handler The current exception handler implementation, which assists when accessing user space memory, may exhibit random data corruption if the compiler decides to use a different register than the specified register %r29 (defined in ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another register, the fault handler will nevertheless store -EFAULT into %r29 and thus trash whatever this register is used for. Looking at the assembly I found that this happens sometimes in emulate_ldd(). To solve the issue, the easiest solution would be if it somehow is possible to tell the fault handler which register is used to hold the error code. Using %0 or %1 in the inline assembly is not posssible as it will show up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not convert to an integer. This patch takes another, better and more flexible approach: We extend the __ex_table (which is out of the execution path) by one 32-word. In this word we tell the compiler to insert the assembler instruction "or %r0,%r0,%reg", where %reg references the register which the compiler choosed for the error return code. In case of an access failure, the fault handler finds the __ex_table entry and can examine the opcode. The used register is encoded in the lowest 5 bits, and the fault handler can then store -EFAULT into this register. Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT config option any longer.Show less

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix data corruption in dsync block recovery for small block sizes The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page.Show less

In the Linux kernel, the following vulnerability has been resolved: smb: Fix regression in writes when non-standard maximum write size negotiated The conversion to netfs in the 6.3 kernel caused a regression when maximum write size is set by the server to an unexpected value which is not a multiple of 4096 (similarly if the user overrides the maximum write size by setting mount parm "wsize", but sets it to a value that is not a multiple of 4096). When negotiated write size is not a multiple of 4096 the netfs code can skip the end of the final page when doing large sequential writes, causing data corruption. This section of code is being rewritten/removed due to a large netfs change, but until that point (ie for the 6.3 kernel until now) we can not support non-standard maximum write sizes. Add a warning if a user specifies a wsize on mount that is not a multiple of 4096 (and round down), also add a change where we round down the maximum write size if the server negotiates a value that is not a multiple of 4096 (we also have to check to make sure that we do not round it down to zero).Show less

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential bug in end_buffer_async_write According to a syzbot report, end_buffer_async_write(), which handles the completion of block device writes, may detect abnormal condition of the buffer async_write flag and cause a BUG_ON failure when using nilfs2. Nilfs2 itself does not use end_buffer_async_write(). But, the async_write flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") as a means of resolving double list insertion of dirty blocks in nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the resulting crash. This modification is safe as long as it is used for file data and b-tree node blocks where the page caches are independent. However, it was irrelevant and redundant to also introduce async_write for segment summary and super root blocks that share buffers with the backing device. This led to the possibility that the BUG_ON check in end_buffer_async_write would fail as described above, if independent writebacks of the backing device occurred in parallel. The use of async_write for segment summary buffers has already been removed in a previous change. Fix this issue by removing the manipulation of the async_write flag for the remaining super root block buffer.Show less

Foxit PDF Reader AcroForm Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PDF Reader. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of Doc objects in AcroForms. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22809.Show less

Foxit PDF Reader U3D File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Foxit PDF Reader. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of U3D files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22912.Show less