Out-of-bounds Write

The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.Show less

The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it executed *handle = sqe, storing the kernel address of the newly acquired submission-queue entry through a pointer taken verbatim from user mode, with no K_SYSCALL_MEMORY_WRITE check in front of it. Any user-mode thread that has been granted a struct rtio kernel object can invoke the syscall with an arbitrary address in handle. That is the ordinary way an unprivileged thread uses the RTIO API, for example via sensor_read_async_mempool() or the async ADC helpers, which call rtio_sqe_copy_in_get_handles() internally. The store happens in supervisor mode before any submission-entry validation, so it fires regardless of whether the SQE contents are subsequently rejected. Only builds with CONFIG_USERSPACE and CONFIG_RTIO are affected; without CONFIG_USERSPACE the verifier is not compiled and the caller is already privileged. The write address is fully attacker-chosen and the written value is a pointer into the caller's own RTIO ring, whose contents the caller controls (the following *sqe = sqes[i] copies an attacker-supplied struct rtio_sqe into that slot). This yields a write-what-where primitive placing a pointer to attacker-controlled data at any kernel address, sufficient to corrupt kernel function pointers, thread structures, or memory-domain partition tables, and thus to escalate from user mode to kernel mode, defeating the isolation boundary CONFIG_USERSPACE is meant to enforce. At minimum it is a reliable kernel memory-corruption and crash primitive. The reporter reproduced the write on qemu_x86: a K_USER thread changed a supervisor global from NULL to a live kernel SQE pointer. The fix adds K_SYSCALL_MEMORY_WRITE(handle, sizeof(*handle)) (guarded by the existing optional-NULL semantics) before the loop, so the destination must lie in the calling thread's writable memory domain or the thread is terminated by K_OOPS. The neighbouring verifier z_vrfy_rtio_cqe_get_mempool_buffer(), which checked its buff/buff_len out-parameters only for read although the implementation writes through them, was hardened separately by bea93400138 ("rtio: syscalls: validate output params as writable"); that residual was materially weaker, since a read check still confines the target to the caller's own memory domain.Show less

An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7.1 and iPadOS 26.7.1, macOS Sequoia 15.8.1, macOS Tahoe 26.7.1. Processing a maliciously crafted file may lead to arbitrary code execution. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals on versions of iOS before iOS 27.Show less

A weakness has been identified in Trusted Domain Project OpenDKIM up to 2.11.0. This affects the function dkim_canon_selecthdrs of the file libopendkim/dkim-canon.c of the component DKIM Signature Header Selection. Executing a manipulation of the argument h can lead to out-of-bounds write. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability was detected in D-Link DIR-895L A1_102b07. Impacted is the function tunnel_set_params of the file tunnel.c of the component L2TP Control Channel Parser. Performing a manipulation results in out-of-bounds write. The attack may be initiated remotely. The exploit is now public and may be used.Show less

Ghidra versions through 12.1.4 contain a stack-based out-of-bounds write vulnerability in the decompiler's leftshift128 function when processing negative shift amounts from p-code. Attackers can craft malicious binaries with specific instruction sequences that trigger the overflow when decompiled, corrupting memory and potentially achieving code execution.Show less

Out-of-bounds Write in the natural width branch of the text sizing protocol in kitty from 0.40.0 before 0.49.0 allows a program writing to the terminal to write past the end of a fixed-size buffer, because screen_handle_multicell_command() in kitty/screen.c appends each codepoint of a grapheme cluster with lc.chars[lc.count++] = ch without any capacity check, while lc is declared by the RAII_ListOfChars macro as a four-element char_type array in the function's stack frame, so an OSC 66 escape code whose payload carries a grapheme cluster longer than four codepoints writes beyond that buffer, one 32-bit value per additional codepoint, in the order the codepoints appear. Where the cluster is preceded in the same payload by a sequence that causes an intermediate flush, the buffer is first migrated to the heap by ensure_space_for_chars() and the write occurs past the heap allocation instead. This results in termination of the kitty process and therefore of all its windows, tabs and child processes.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: validate CLC firmware records The CLC region is supplied by firmware, but the loader trusts the region count and each record length. A malformed image can make the region table pointer precede the firmware buffer, make the record loop fail to advance, or index phy->clc past its end. Validate the table and record bounds before dereferencing or copying.Show less

The Botslab G980H dash camera firmware contains an out of bounds write vulnerability in its command processing functionality. An authenticated attacker with adjacent network access could submit crafted command data that corrupts memory, potentially disrupting authentication state or causing the affected process to terminate and the device to restart, resulting in a temporary denial of service.Show less

An out-of-bounds write vulnerability in jslGetTokenValueAsString() in Espruino 2v29 (commit bffc6d0) allows crafted JavaScript input containing an overlong token to trigger a one-byte write beyond the JsLex.token buffer in RELEASE/NO_ASSERT builds. The out-of-bounds write corrupts the adjacent tokenValue pointer, resulting in memory corruption and potentially causing application crashes or denial of service.Show less

An out-of-bounds write in the connection-monitoring logic of the MongoDB C Driver may allow an unauthenticated party who controls name resolution and the responses of the hosts named in a client's connection string to write beyond the end of a heap buffer. This may cause the application using the driver to terminate unexpectedly.Show less

A flaw was found in GIMP. When processing a specially crafted GIMPressionist preset file, the plug-in does not properly validate vector indices before writing into fixed-size arrays. This can lead to an out-of-bounds write, corrupting memory. An attacker could exploit this by convincing a user to load a malicious preset file, potentially causing a crash or enabling arbitrary code execution.Show less

A vulnerability was identified in D-Link DIR-825 3.00b32. Affected is the function tunnel_set_params of the file tunnel.c of the component rp-l2tp. The manipulation of the argument peer_hostname  leads to out-of-bounds write. The attack may be initiated remotely.Show less

Foxit PDF Editor/Reader does not perform sufficient verification of the JPEG2000 image metadata in the PDF file, which leads to out-of-bounds write in the heap buffer during decoding, potentially causing the program to crash and introducing the risk of arbitrary code execution.Show less

A heap-based out-of-bounds write vulnerability exists in Foxit PDF Editor/Reader’s PRC parser due to insufficient validation of vertex indices in triangular fan texture meshes. Successful exploitation could result in memory corruption and an application crash.Show less