Out-of-bounds Write

ProxySQL is a proxy for MySQL and its forks, as well as PostgreSQL. Versions 2.0.18 through 3.0.8 have a pre-authentication heap memory corruption vulnerability in the MySQL and PostgreSQL protocol first-read paths. A remote unauthenticated client can declare an oversized first packet length, and ProxySQL passes that attacker-controlled length directly to `recv()` while writing into a fixed 32 KB input queue. Version 3.0.9 patches the issue.Show less

A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.Show less

An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.Show less

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, an integer overflow in ht_undo_impl() in src/lib/OpenEXRCore/internal_ht.cpp leads to a heap-buffer overflow when decoding a crafted HTJ2K-compressed EXR file. decode->channels[i].width (int32_t) is multiplied by bytes_per_element in 32-bit signed arithmetic. With large widths (e.g., >= 536870912 for FLOAT data), this overflows, producing a corrupted offset that is later used for pointer arithmetic and can cause a heap out-of-bounds write. The same unchecked multiplication pattern appears in two other HTJ2K paths (bytes-per-line accumulation and pixel-line pointer advancement). As with related CVE-2026-34378 through CVE-2026-34589 fixes in other codecs, validating only after the multiplication is too late because the value may already be overflowed. This issue has been fixed in version 3.4.12.Show less

An out-of-bounds write vulnerability in FFmpeg's libavcodec library, specifically in the MagicYUV decoder, allows denial-of-service and, in some cases, can be exploited for remote code execution. This vulnerability is associated with the file libavcodec/magicyuv.C. This issue affects FFmpeg before version 8.1.2.Show less

Out-of-bounds Write vulnerability in RTI Connext Professional (Queueing Service,Core Libraries,Persistence Service) allows Overflow Buffers. This issue affects Connext Professional: from 7.4.0 before 7.7.0, from 7.0.0 before 7.3.1.3, from 6.1.0 before 6.1.*.Show less

NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.Show less

A flaw was found in 389 Directory Server in the __aclp__normalize_acltxt() function of aclparse.c. A malformed ACI (Access Control Instruction) string can trigger heap-buffer-overflow writes and reads during ACI parsing. The function fails to validate that the ACI keyword has sufficient length after whitespace stripping, leading to a 1-byte out-of-bounds write and subsequent out-of-bounds reads. An authenticated user with write access to the aci attribute could send a crafted ACI value to silently corrupt heap memory in the directory server process.Show less

Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf->ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of struct bt_hfp_hf. Because the parser places no cap on the number of +CIND: list entries, a remote Attendant Gateway (a malicious, compromised, or spoofed peer the device connects to over Bluetooth) can send a response with more than 20 recognized indicator entries and drive index arbitrarily large, writing a small attacker-positioned value past the array into adjacent struct fields (feature masks, SDP/version state, the calls[] array, work/atomic bookkeeping) and potentially beyond the static connection pool slot. This yields memory corruption and at least denial of service of the Bluetooth host, triggered by a single malformed AT response with no user interaction. The sibling consumer ag_indicator_handle_values() already performed the equivalent bounds check; this commit adds the same index >= ARRAY_SIZE(hf->ind_table) guard to close the gap. Affects builds with CONFIG_BT_HFP_HF enabled; introduced with the original HFP HF CIND parser (~v1.7) and present through v4.4.0.Show less

stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. In versions prior to master-584-0a7ae07, the pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the GLOBAL opcode handler. The issue was caused by missing validation when searching for newline-delimited fields. A crafted .ckpt file without the expected newline could cause the parser to use -1 as a copy length, resulting in immediate heap corruption. The attack requires the victim or application to load a .ckpt file from an untrusted source, such as a downloaded model from a model sharing site. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by following these instructions: do not load .ckpt checkpoint files from untrusted sources, and prefer trusted model sources and safer formats such as .safetensors where possible.Show less

stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. In versions prior to master-584-0a7ae07, the pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the BINUNICODE opcode handler. The issue was caused by sign confusion on the opcode length field. A crafted .ckpt file could trigger memcpy with a very large length derived from a negative signed value, causing immediate heap corruption. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by only loading .ckpt checkpoint files from trusted sources and preferring trusted model sources and safer formats such as .safetensors where possible.Show less

In numberOfReportBlocks of RtpSession.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Show less

In Write of msg_to_host_buffer.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Show less

In IntfGraphCreate of intfgraph.c, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Show less

In ExecuteGraph command handler of EdgeTPU firmware, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with root privileges needed. User interaction is not needed for exploitation.Show less

In RtpSession::rtpSendRtcpPacket, there is a possible OOB write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Show less

In multiple functions of VideoRtpPayloadDecoderNode.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Show less

In __mfc_core_nal_q_get_dec_metadata_sei_nal of mfc_core_nal_q.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Show less