Out-of-bounds Write

Vim is an open source, command line text editor. Prior to 9.2.0653, the tree_count_words() function in src/spellfile.c fills in the word-count fields of a spell-file word trie by walking it iteratively with a depth counter. The counter is bounded only by the trie structure itself; it is never checked against the size of the fixed MAXWLEN-element stack arrays it indexes (arridx[], curi[], wordcount[]). A crafted .spl/.sug file pair, loaded when the user invokes spell suggestion, can drive the descent arbitrarily deep, so the function writes past the end of those arrays. This is a stack out-of-bounds write that corrupts the call frame and crashes the editor. This vulnerability is fixed in 9.2.0653.Show less

List::SomeUtils::XS versions before 0.59 for Perl have a heap buffer overflow in the pairwise function. pairwise() collects the values returned by the block into a heap buffer sized to the longer input array, then grows the buffer before each copy with a single quadrupling (alloc <<= 2) instead of a loop. A block call that returns more than four times the current allocation in one invocation outgrows that one quadrupling, and the copy writes past the end of the buffer. Any caller of pairwise() whose block returns, for a single pair, more than four times the longer input array's length writes past the buffer and corrupts the heap.Show less

In EmberZNet v9.0.2 and earlier, malformed ClearWeekdaySchedule messages can trigger out-of-bounds writes into Door Lock schedule state. The size and location of this data is limited. These messages must come from a device that has already joined the network. Only devices supporting the Door Lock cluster may be impacted.Show less

In EmberZNet v9.0.2 and earlier, malformed IAS Zone enrollment messages can trigger an out-of-bounds state-table write and terminate the process. The size and location of this write is limited. These messages must come from a device that has already joined the network. Only devices supporting the IAS Zone cluster may be impacted.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits().Show less

In the Linux kernel, the following vulnerability has been resolved: sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing When a listening SCTP server processes a COOKIE_ECHO chunk, the cached peer INIT chunk embedded after the cookie is parsed and its parameters are later walked by sctp_process_init() using sctp_walk_params(). However, the chunk header length of this cached INIT chunk was not validated against the remaining buffer in the COOKIE_ECHO payload. If the length field is inflated, the parameter walk can run beyond the actual received data, leading to out-of-bounds reads and potential memory corruption during later parameter handling (e.g. STATE_COOKIE processing and kmemdup() copies). Add a bounds check in sctp_unpack_cookie() to ensure the cached INIT chunk length does not exceed the available data in the COOKIE_ECHO buffer before it is used.Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using the PF's log_max_current_uc/mc_list capabilities. When querying a VF vport with a larger configured max (via devlink), the firmware response can overflow this buffer: BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385 CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_report+0x176/0x4e4 kasan_report+0xc8/0x100 mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core] esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core] esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core] esw_vport_change_handler+0x6a/0x90 [mlx5_core] process_one_work+0x87f/0x15e0 worker_thread+0x62b/0x1020 kthread+0x375/0x490 ret_from_fork+0x4dc/0x810 ret_from_fork_asm+0x11/0x20 </TASK> Fix by querying the vport's own HCA caps to size the buffer correctly. Refactor the function to allocate and return the MAC list internally, removing the caller's dependency on knowing the correct max.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add buffer overflow check in MS get_info_ioctl Add validation that the info size returned from the metric stream info query is not exceeded when checked against the allocated buffer size. If the firmware returns a size larger than the buffer, reject the operation with -EOVERFLOW instead of proceeding with an incorrect buffer copy.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast.Show less

In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ]Show less

In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space.Show less

In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc The cpu_id attribute supplied by user space through UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu() without first verifying that the value is within the valid CPU range. Passing such untrusted data to cpumask_test_cpu() may lead to an out-of-bounds read of the underlying cpumask bitmap: the helper expands to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with no bound check. In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this turns a bad user input into a machine reboot. Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL before it is used. Reported by Smatch.Show less

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented index against the buffer bound before the second write and returning -EINVAL if the buffer is too small to contain the extended command.Show less

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Clamp XDomain response data copy to allocation size tb_xdp_properties_request() derives the per-packet copy length from the response header without checking that it fits in the previously allocated data buffer. A malicious peer can set its length field larger than the declared data_length, causing memcpy to write past the kcalloc allocation. Clamp the per-packet copy length so that the cumulative offset never exceeds data_len.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11 The v11 MQD manager incorrectly assigned the CP-compute variants of checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow. During CRIU checkpoint of an SDMA queue on Navi3x: - checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer, leaking 1536 bytes of adjacent GTT memory to userspace During CRIU restore: - restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer, corrupting 1536 bytes of adjacent GTT memory (often the ring buffer or neighboring MQDs) This is a copy-paste regression unique to v11. All other ASIC backends (cik, vi, v9, v10, v12) correctly use the SDMA-specific variants. Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly handle the smaller v11_sdma_mqd structure, matching the pattern used in other MQD managers. (cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp VBIOS HDMI retimer register count to array size [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69)Show less