Missing Release of Resource after Effective Lifetime

Synapse before 1.52.0 with URL preview functionality enabled will attempt to generate URL previews for media stream URLs without properly limiting connection time. Connections will only be terminated after `max_spider_size` (default: 10M) bytes have been downloaded, which can in some cases lead to long-lived connections towards the streaming media server (for instance, Icecast). This can cause excessive traffic and connections toward such servers if their stream URL is, for example, posted to a large room with many Synapse instances with URL preview enabled. Version 1.52.0 implements a timeout mechanism which will terminate URL preview connections after 30 seconds. Since generating URL previews for media streams is not supported and always fails, 1.53.0 additionally implements an allow list for content types for which Synapse will even attempt to generate a URL preview. Upgrade to 1.53.0 to fully resolve the issue. As a workaround, turn off URL preview functionality by setting `url_preview_enabled: false` in the Synapse configuration file.Show less

Dell BIOS versions contain a Missing Release of Resource after Effective Lifetime vulnerability. A local authenticated administrator user could potentially exploit this vulnerability by consuming excess memory in order to cause the application to crash.Show less

An issue was discovered in Samsung TizenRT through 3.0_GBM (and 3.1_PRE). createDB in security/provisioning/src/provisioningdatabasemanager.c has a missing sqlite3_close after sqlite3_open_v2, leading to a denial of service.Show less

A Missing Release of File Descriptor or Handle after Effective Lifetime vulnerability in plugable authentication module (PAM) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). It is possible that after the termination of a gRPC connection the respective/var/run/<pid>.env file is not getting deleted which if occurring repeatedly can cause inode exhaustion. Inode exhaustion can present itself in two different ways: 1. The following log message can be observed: host kernel: pid <pid> (<process>), uid <uid> inumber <number> on /.mount/var: out of inodes which by itself is a clear indication. 2. The following log message can be observed: host <process>[<pid>]: ... : No space left on device which is not deterministic and just a representation of a write error which could have several reasons. So the following check needs to be done: user@host> show system storage no-forwarding Filesystem Size Used Avail Capacity Mounted on /dev/ada1p1 475M 300M 137M 69% /.mount/var which indicates that the write error is not actually due to a lack of disk space. If either 1. or 2. has been confirmed, then the output of: user@host> file list /var/run/*.env | count need to be checked and if it indicates a high (>10000) number of files the system has been affected by this issue. This issue affects: Juniper Networks Junos OS All versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-EVO; 21.1 versions prior to 21.1R3-S1-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.Show less

A vulnerability has been identified in CP-8000 MASTER MODULE WITH I/O -25/+70°C (All versions < CPC80 V16.30), CP-8000 MASTER MODULE WITH I/O -40/+70°C (All versions < CPC80 V16.30), CP-8021 MASTER MODULE (All versions < CPC80 V16.30), CP-8022 MASTER MODULE WITH GPRS (All versions < CPC80 V16.30). When using the HTTPS server under specific conditions, affected devices do not properly free resources. This could allow an unauthenticated remote attacker to put the device into a denial of service condition.Show less

A stack buffer overflow exists in Mini-XML v3.2. When inputting an unformed XML string to the mxmlLoadString API, it will cause a stack-buffer-overflow in mxml_string_getc:2611. NOTE: it is unclear whether this input is allowed by the API specificationShow less

A memory leak issue was discovered in Mini-XML v3.2 that could cause a denial of service. NOTE: testing reports are inconsistent, with some testers seeing the issue in both the 3.2 release and in the October 2021 development code, but others not seeing the issue in the 3.2 releaseShow less

NVIDIA GPU Display Driver for Windows contains a vulnerability in the kernel mode layer (nvlddmkm.sys), where the memory management software does not release a resource after its effective lifetime has ended, which may lead to denial of service.Show less

A vulnerability in the web services interface of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper resource management in the HTTP server code. An attacker could exploit this vulnerability by sending a large number of HTTP requests to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.Show less

A potential DOS vulnerability was discovered in GitLab CE/EE affecting all versions from 13.1 prior to 14.7.7, 14.8.0 prior to 14.8.5, and 14.9.0 prior to 14.9.2. The api to update an asset as a link from a release had a regex check which caused exponential number of backtracks for certain user supplied values resulting in high CPU usage.Show less

A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results. Affected QEMU versions <= 6.2.0.Show less

A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and other unexpected results. Affected QEMU version: 6.2.0.Show less

A Missing Release of Resource after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause a Denial of Service (DoS) by sending specific packets over VXLAN which cause heap memory to leak and on exhaustion the PFE to reset. The heap memory utilization can be monitored with the command: user@host> show chassis fpc This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R2-S6, 19.4R3-S6; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. This issue does not affect versions of Junos OS prior to 19.4R1.Show less

An Uncontrolled Resource Consumption vulnerability in the handling of IPv6 neighbor state change events in Juniper Networks Junos OS allows an adjacent attacker to cause a memory leak in the Flexible PIC Concentrator (FPC) of an ACX5448 router. The continuous flapping of an IPv6 neighbor with specific timing will cause the FPC to run out of resources, leading to a Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition, requiring a manual PFE restart to restore service. The following error messages will be seen after the FPC resources have been exhausted: fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 fpc0 DNX_NH::dnx_nh_tag_ipv4_hw_install(),3135: dnx_nh_tag_ipv4_hw_install: BCM L3 Egress create object failed for NH 602 (-14:No resources for operation), BCM NH Params: unit:0 Port:41, L3_INTF:0 Flags: 0x40 This issue only affects the ACX5448 router. No other products or platforms are affected by this vulnerability. This issue affects Juniper Networks Junos OS on ACX5448: 18.4 versions prior to 18.4R3-S10; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R1-S8, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.Show less

In Bluetooth, there is a possible application crash due to bluetooth flooding a device with LMP_AU_rand packet. This could lead to remote denial of service of bluetooth with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS06198608; Issue ID: ALPS06198608.Show less

There is a memory leak vulnerability in CloudEngine 12800 V200R019C00SPC800, CloudEngine 5800 V200R019C00SPC800, CloudEngine 6800 V200R019C00SPC800 and CloudEngine 7800 V200R019C00SPC800. The software does not sufficiently track and release allocated memory while parse a series of crafted binary messages, which could consume remaining memory. Successful exploit could cause memory exhaust.Show less

An issue was discovered in Barrier before 2.3.4. The barriers component (aka the server-side implementation of Barrier) does not correctly close file descriptors for established TCP connections. An unauthenticated remote attacker can thus cause file descriptor exhaustion in the server process, leading to denial of service.Show less

In broadband environments, including but not limited to Enhanced Subscriber Management, (CHAP, PPP, DHCP, etc.), on Juniper Networks Junos OS devices where RADIUS servers are configured for managing subscriber access and a subscriber is logged in and then requests to logout, the subscriber may be forced into a "Terminating" state by an attacker who is able to send spoofed messages appearing to originate from trusted RADIUS server(s) destined to the device in response to the subscriber's request. These spoofed messages cause the Junos OS General Authentication Service (authd) daemon to force the broadband subscriber into this "Terminating" state which the subscriber will not recover from thereby causing a Denial of Service (DoS) to the endpoint device. Once in the "Terminating" state, the endpoint subscriber will no longer be able to access the network. Restarting the authd daemon on the Junos OS device will temporarily clear the subscribers out of the "Terminating" state. As long as the attacker continues to send these spoofed packets and subscribers request to be logged out, the subscribers will be returned to the "Terminating" state thereby creating a persistent Denial of Service to the subscriber. An indicator of compromise may be seen by displaying the output of "show subscribers summary". The presence of subscribers in the "Terminating" state may indicate the issue is occurring. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S8, 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R1-S4, 19.4R3-S3; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. This issue does not affect: Juniper Networks Junos OS 12.3 version 12.3R1 and later versions; 15.1 version 15.1R1 and later versions.Show less