Improper Handling of Exceptional Conditions

A vulnerability in the detection engine of Cisco Firepower Threat Defense Software could allow an unauthenticated, remote attacker to cause the unexpected restart of the SNORT detection engine, resulting in a denial of service (DoS) condition. The vulnerability is due to the incomplete error handling of the SSL or TLS packet header during the connection establishment. An attacker could exploit this vulnerability by sending a crafted SSL or TLS packet during the connection handshake. An exploit could allow the attacker to cause the SNORT detection engine to unexpectedly restart, resulting in a partial DoS condition while the detection engine restarts. Versions prior to 6.2.3.4 are affected.Show less

A Denial of Service issue was discovered in the LIVE555 Streaming Media libraries as used in Live555 Media Server 0.93. It can cause an RTSPServer crash in handleHTTPCmd_TunnelingPOST, when RTSP-over-HTTP tunneling is supported, via x-sessioncookie HTTP headers in a GET request and a POST request within the same TCP session. This occurs because of a call to an incorrect virtual function pointer in the readSocket function in GroupsockHelper.cpp.Show less

IBM DataPower Gateways 7.1, 7.2, 7.5, 7.5.1, 7.5.2, 7.6, and 7.7 and IBM MQ Appliance are vulnerable to a denial of service, caused by the improper handling of full file system. A local attacker could exploit this vulnerability to cause a denial of service. IBM X-Force ID: 145171.Show less

Failure condition is not handled properly and the correct error code is not returned. It could cause unintended SUI behavior and create unintended SUI display in Snapdragon Automobile, Snapdragon Mobile and Snapdragon Wear in versions MDM9206, MDM9607, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 430, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 800, SD 810, SD 820, SD 820A, SD 835, SD 845, SD 850, SDA660, SDA845, SDX24, SXR1130.Show less

A missing error check exists in the Multi-Camera interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted request on port 10001 could allow an attacker to reset the user accounts to factory defaults, without authentication.Show less

A flaw was found in the Linux kernel before version 4.12 in the way the KVM module processed the trap flag(TF) bit in EFLAGS during emulation of the syscall instruction, which leads to a debug exception(#DB) being raised in the guest stack. A user/process inside a guest could use this flaw to potentially escalate their privileges inside the guest. Linux guests are not affected by this.Show less

It is possible to configure Apache CXF to use the com.sun.net.ssl implementation via 'System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");'. When this system property is set, CXF uses some reflection to try to make the HostnameVerifier work with the old com.sun.net.ssl.HostnameVerifier interface. However, the default HostnameVerifier implementation in CXF does not implement the method in this interface, and an exception is thrown. However, in Apache CXF prior to 3.2.5 and 3.1.16 the exception is caught in the reflection code and not properly propagated. What this means is that if you are using the com.sun.net.ssl stack with CXF, an error with TLS hostname verification will not be thrown, leaving a CXF client subject to man-in-the-middle attacks.Show less

Huawei smart phones LYO-L21 with software LYO-L21C479B107, LYO-L21C479B107 have a privilege escalation vulnerability. An authenticated, local attacker can crafts malformed packets after tricking a user to install a malicious application and exploit this vulnerability when in the exception handling process. Successful exploitation may cause the attacker to obtain a higher privilege of the smart phones.Show less

A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the firmware of an affected phone incorrectly handles errors that could occur when an incoming phone call is not answered. An attacker could exploit this vulnerability by sending a set of maliciously crafted SIP packets to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition. This vulnerability affects Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware if they are running a Multiplatform Firmware release prior to Release 11.1(2). Cisco Bug IDs: CSCvi24718.Show less

Cloud Foundry Loggregator, versions 89.x prior to 89.5 or 96.x prior to 96.1 or 99.x prior to 99.1 or 101.x prior to 101.9 or 102.x prior to 102.2, does not handle errors thrown while constructing certain http requests. A remote authenticated user may construct malicious requests to cause the traffic controller to leave dangling TCP connections, which could cause denial of service.Show less

A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792.Show less

Certain 802.11 network management messages have been determined to invoke wireless access point blacklisting security defenses when not required, which can necessitate intervention by hospital staff to reset the device and reestablish a network connection to the Wi-Fi access point. During this state, the Philips IntelliVue MX40 Version B.06.18 can either connect to an alternative access point within signal range for association to a central monitoring station, or it can remain in local monitoring mode until the device is reset by hospital staff. CVSS v3 base score: 6.5, CVSS vector string: AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H. Philips has released software update, Version B.06.18, to fix the improper cleanup on thrown exception vulnerability, and implement mitigations to reduce the risk associated with the improper handling of exceptional conditions vulnerability. The software update implements messaging and alarming on the MX40 and at the central monitoring station, when the MX40 disconnects from the access point.Show less

Under specific 802.11 network conditions, a partial re-association of the Philips IntelliVue MX40 Version B.06.18 WLAN monitor to the central monitoring station is possible. In this state, the central monitoring station can indicate the MX40 is not connected or associated to the central monitor, and thus should be operating in local monitoring mode (local audio-on, screen-on), but the MX40 WLAN itself can instead still be operating in telemetry mode (local audio-off, screen-off). If a patient experiences an alarm event and clinical staff expects the MX40 to provide local alarming when it is not available from the local device, a delay of treatment can occur. CVSS v3 base score: 6.5, CVSS vector string: AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H. Philips has released software update, Version B.06.18, to fix the improper cleanup on thrown exception vulnerability, and implement mitigations to reduce the risk associated with the improper handling of exceptional conditions vulnerability. The software update implements messaging and alarming on the MX40 and at the central monitoring station, when the MX40 disconnects from the access point.Show less

A vulnerability in the Secure Sockets Layer (SSL) Engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper error handling while processing SSL traffic. An attacker could exploit this vulnerability by sending a large volume of crafted SSL traffic to the vulnerable device. A successful exploit could allow the attacker to degrade the device performance by triggering a persistent high CPU utilization condition. Cisco Bug IDs: CSCvh89340.Show less

A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729.Show less

ChakraCore and Microsoft Windows 10 Gold, 1511, 1607, 1703, 1709, and Windows Server 2016 allows remote code execution, due to how the Chakra scripting engine handles objects in memory, aka "Chakra Scripting Engine Memory Corruption Vulnerability". This CVE ID is unique from CVE-2018-0872, CVE-2018-0873, CVE-2018-0874, CVE-2018-0930, CVE-2018-0931, CVE-2018-0933, CVE-2018-0936, and CVE-2018-0937.Show less

In Bitmap.ccp if Bitmap.nativeCreate fails an out of memory exception is not thrown leading to a java.io.IOException later on. This could lead to a remote denial of service of a critical system process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 8.0, 8.1. Android ID: A-33846679.Show less