Improper Handling of Exceptional Conditions

Meshtastic device firmware is a firmware for meshtastic devices to run an open source, off-grid, decentralized, mesh network built to run on affordable, low-power devices. Meshtastic device firmware is subject to a denial of serivce vulnerability in MQTT handling, fixed in version 2.4.1 of the Meshtastic firmware and on the Meshtastic public MQTT Broker. It's strongly suggested that all users of Meshtastic, particularly those that connect to a privately hosted MQTT server, update to this or a more recent stable version right away. There are no known workarounds for this vulnerability.Show less

An issue was discovered in Zimbra Collaboration (ZCS) 9.0 and 10.0. The zmmailboxdmgr binary, a component of ZCS, is intended to be executed by the zimbra user with root privileges for specific mailbox operations. However, an attacker can escalate privileges from the zimbra user to root, because of improper handling of input arguments. An attacker can execute arbitrary commands with elevated privileges, leading to local privilege escalation.Show less

NVIDIA Jetson Linux contains a vulnerability in NvGPU where error handling paths in GPU MMU mapping code fail to clean up a failed mapping attempt. A successful exploit of this vulnerability may lead to denial of service, code execution, and escalation of privileges.Show less

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network based, unauthenticated attacker to cause the RPD process to crash leading to a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, RPD crashes and restarts. Continuous receipt of the malformed BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. This issue affects: Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. Juniper Networks Junos OS Evolved: * All versions earlier than 21.2R3-S7; * 21.3-EVO versions earlier than 21.3R3-S5; * 21.4-EVO versions earlier than 21.4R3-S8; * 22.1-EVO versions earlier than 22.1R3-S4; * 22.2-EVO versions earlier than 22.2R3-S3; * 22.3-EVO versions earlier than 22.3R3-S2; * 22.4-EVO versions earlier than 22.4R3; * 23.2-EVO versions earlier than 23.2R2.Show less

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). When conflicting information (IP or ISO addresses) about a node is added to the Traffic Engineering (TE) database and then a subsequent operation attempts to process these, rpd will crash and restart. This issue affects: Junos OS: * 22.4 versions before 22.4R3-S1, * 23.2 versions before 23.2R2,  * 23.4 versions before 23.4R1-S1, 23.4R2,  This issue does not affect Junos OS versions earlier than 22.4R1. Junos OS Evolved: * 22.4-EVO versions before 22.4R3-S2-EVO, * 23.2-EVO versions before 23.2R2-EVO, * 23.4-EVO versions before 23.4R1-S1-EVO, 23.4R2-EVO, This issue does not affect Junos OS Evolved versions earlier than before 22.4R1.Show less

An Improper Handling of Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a logically adjacent downstream RSVP neighbor to cause kernel memory exhaustion, leading to a kernel crash, resulting in a Denial of Service (DoS). The kernel memory leak and eventual crash will be seen when the downstream RSVP neighbor has a persistent error which will not be corrected. System kernel memory can be monitored through the use of the 'show system kernel memory' command as shown below: user@router> show system kernel memory   Real memory total/reserved: 4130268/ 133344 Kbytes kmem map free: 18014398509110220 Kbytes This issue affects: Junos OS: * All versions before 20.4R3-S9, * All versions of 21.2, * from 21.4 before 21.4R3-S5, * from 22.1 before 22.1R3-S5, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3-S2, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2; Junos OS Evolved: * All versions before 21.4R3-S5-EVO, * from 22.1-EVO before 22.1R3-S5-EVO, * from 22.2-EVO before 22.2R3-S3-EVO, * from 22.3-EVO before 22.3R3-S2-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO.Show less

An Improper Handling of Exceptional Conditions vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker sending a specific malformed BGP update message to cause the session to reset, resulting in a Denial of Service (DoS). Continued receipt and processing of these malformed BGP update messages will create a sustained Denial of Service (DoS) condition. Upon receipt of a BGP update message over an established BGP session containing a specifically malformed tunnel encapsulation attribute, when segment routing is enabled, internal processing of the malformed attributes within the update results in improper parsing of remaining attributes, leading to session reset: BGP SEND Notification code 3 (Update Message Error) subcode 1 (invalid attribute list) Only systems with segment routing enabled are vulnerable to this issue. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations, and requires a remote attacker to have at least one established BGP session. This issue affects: Junos OS: * All versions before 21.4R3-S8, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S1, * from 23.4 before 23.4R1-S2, 23.4R2. Junos OS Evolved:  * All versions before 21.4R3-S8-EVO, * from 22.2-EVO before 22.2R3-S4-EVO, * from 22.3-EVO before 22.3R3-S3-EVO, * from 22.4-EVO before 22.4R3-S3-EVO, * from 23.2-EVO before 23.2R2-S1-EVO, * from 23.4-EVO before 23.4R1-S2-EVO, 23.4R2-EVO.Show less

matrix-appservice-irc is a Node.js IRC bridge for the Matrix messaging protocol. The fix for GHSA-wm4w-7h2q-3pf7 / CVE-2024-32000 included in matrix-appservice-irc 2.0.0 relied on the Matrix homeserver-provided timestamp to determine whether a user has access to the event they're replying to when determining whether or not to include a truncated version of the original event in the IRC message. Since this value is controlled by external entities, a malicious Matrix homeserver joined to a room in which a matrix-appservice-irc bridge instance (before version 2.0.1) is present can fabricate the timestamp with the intent of tricking the bridge into leaking room messages the homeserver should not have access to. matrix-appservice-irc 2.0.1 drops the reliance on `origin_server_ts` when determining whether or not an event should be visible to a user, instead tracking the event timestamps internally. As a workaround, it's possible to limit the amount of information leaked by setting a reply template that doesn't contain the original message.Show less

Improper Handling of Exceptional Conditions, Uncontrolled Resource Consumption vulnerability in Apache Tomcat. When processing an HTTP/2 stream, Tomcat did not handle some cases of excessive HTTP headers correctly. This led to a miscounting of active HTTP/2 streams which in turn led to the use of an incorrect infinite timeout which allowed connections to remain open which should have been closed. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M20, from 10.1.0-M1 through 10.1.24, from 9.0.0-M1 through 9.0.89. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected. Users are recommended to upgrade to version 11.0.0-M21, 10.1.25 or 9.0.90, which fixes the issue.Show less

Improper handling of exceptional conditions in Secure Folder prior to SMR Jul-2024 Release 1 allows physical attackers to bypass authentication under certain condition. User interaction is required for triggering this vulnerability.Show less

In mintplex-labs/anything-llm, a vulnerability exists in the thread update process that allows users with Default or Manager roles to escalate their privileges to Administrator. The issue arises from improper input validation when handling HTTP POST requests to the endpoint `/workspace/:slug/thread/:threadSlug/update`. Specifically, the application fails to validate or check user input before passing it to the `workspace_thread` Prisma model for execution. This oversight allows attackers to craft a Prisma relation query operation that manipulates the `users` model to change a user's role to admin. Successful exploitation grants attackers the highest level of user privileges, enabling them to see and perform all actions within the system.Show less

mintplex-labs/anything-llm is vulnerable to multiple security issues due to improper input validation in several endpoints. An attacker can exploit these vulnerabilities to escalate privileges from a default user role to an admin role, read and delete arbitrary files on the system, and perform Server-Side Request Forgery (SSRF) attacks. The vulnerabilities are present in the `/request-token`, `/workspace/:slug/thread/:threadSlug/update`, `/system/remove-logo`, `/system/logo`, and collector's `/process` endpoints. These issues are due to the application's failure to properly validate user input before passing it to `prisma` functions and other critical operations. Affected versions include the latest version prior to 1.0.0.Show less

An issue was discovered on Mercusys MW325R EU V3 MW325R(EU)_V3_1.11.0 221019 devices. A WAN attacker can make the admin interface unreachable/invisible via an unauthenticated HTTP request. Verification of the data sent by the user does not occur. The web server does not crash, but the admin interface becomes invisible, because the files necessary to display the content are no longer available. A reboot of the router is typically required to restore the correct behavior.Show less

Nautobot is a Network Source of Truth and Network Automation Platform. A user with permissions to view Dynamic Group records (`extras.view_dynamicgroup` permission) can use the Dynamic Group detail UI view (`/extras/dynamic-groups/<uuid>/`) and/or the members REST API view (`/api/extras/dynamic-groups/<uuid>/members/`) to list the objects that are members of a given Dynamic Group. In versions of Nautobot between 1.3.0 (where the Dynamic Groups feature was added) and 1.6.22 inclusive, and 2.0.0 through 2.2.4 inclusive, Nautobot fails to restrict these listings based on the member object permissions - for example a Dynamic Group of Device objects will list all Devices that it contains, regardless of the user's `dcim.view_device` permissions or lack thereof. This issue has been fixed in Nautobot versions 1.6.23 and 2.2.5. Users are advised to upgrade. This vulnerability can be partially mitigated by removing `extras.view_dynamicgroup` permission from users however a full fix will require upgrading.Show less

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible access to freed memory in link clear After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20Show less

D-Link G416 httpd Improper Handling of Exceptional Conditions Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of D-Link G416 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper handling of error conditions. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-21664.Show less

The adapter @hono/node-server allows you to run your Hono application on Node.js. Prior to 1.10.1, the application hangs when receiving a Host header with a value that `@hono/node-server` can't handle well. Invalid values are those that cannot be parsed by the `URL` as a hostname such as an empty string, slashes `/`, and other strings. The version 1.10.1 includes the fix for this issue.Show less