Uncontrolled Recursion

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Fix stack protector issue in send_ipi_data() Function kvm_io_bus_read() is called in function send_ipi_data(), buffer size of parameter *val should be at least 8 bytes. Since some emulation functions like loongarch_ipi_readl() and kvm_eiointc_read() will write the buffer *val with 8 bytes signed extension regardless parameter len. Otherwise there will be buffer overflow issue when CONFIG_STACKPROTECTOR is enabled. The bug report is shown as follows: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: send_ipi_data+0x194/0x1a0 [kvm] CPU: 11 UID: 107 PID: 2692 Comm: CPU 0/KVM Not tainted 6.17.0-rc1+ #102 PREEMPT(full) Stack : 9000000005901568 0000000000000000 9000000003af371c 900000013c68c000 900000013c68f850 900000013c68f858 0000000000000000 900000013c68f998 900000013c68f990 900000013c68f990 900000013c68f6c0 fffffffffffdb058 fffffffffffdb0e0 900000013c68f858 911e1d4d39cf0ec2 9000000105657a00 0000000000000001 fffffffffffffffe 0000000000000578 282049464555206e 6f73676e6f6f4c20 0000000000000001 00000000086b4000 0000000000000000 0000000000000000 0000000000000000 9000000005709968 90000000058f9000 900000013c68fa68 900000013c68fab4 90000000029279f0 900000010153f940 900000010001f360 0000000000000000 9000000003af3734 000000004390000c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ... Call Trace: [<9000000003af3734>] show_stack+0x5c/0x180 [<9000000003aed168>] dump_stack_lvl+0x6c/0x9c [<9000000003ad0ab0>] vpanic+0x108/0x2c4 [<9000000003ad0ca8>] panic+0x3c/0x40 [<9000000004eb0a1c>] __stack_chk_fail+0x14/0x18 [<ffff8000023473f8>] send_ipi_data+0x190/0x1a0 [kvm] [<ffff8000023313e4>] __kvm_io_bus_write+0xa4/0xe8 [kvm] [<ffff80000233147c>] kvm_io_bus_write+0x54/0x90 [kvm] [<ffff80000233f9f8>] kvm_emu_iocsr+0x180/0x310 [kvm] [<ffff80000233fe08>] kvm_handle_gspr+0x280/0x478 [kvm] [<ffff8000023443e8>] kvm_handle_exit+0xc0/0x130 [kvm]Show less

XGrammar is an open-source library for efficient, flexible, and portable structured generation. Prior to version 0.1.21, XGrammar has an infinite recursion issue in the grammar. This issue has been resolved in version 0.1.21.Show less

A denial of service vulnerability exists in the JSONReader component of the run-llama/llama_index repository, specifically in version v0.12.37. The vulnerability is caused by uncontrolled recursion when parsing deeply nested JSON files, which can lead to Python hitting its maximum recursion depth limit. This results in high resource consumption and potential crashes of the Python process. The issue is resolved in version 0.12.38.Show less

In the Linux kernel, the following vulnerability has been resolved: eventpoll: Fix semi-unbounded recursion Ensure that epoll instances can never form a graph deeper than EP_MAX_NESTS+1 links. Currently, ep_loop_check_proc() ensures that the graph is loop-free and does some recursion depth checks, but those recursion depth checks don't limit the depth of the resulting tree for two reasons: - They don't look upwards in the tree. - If there are multiple downwards paths of different lengths, only one of the paths is actually considered for the depth check since commit 28d82dc1c4ed ("epoll: limit paths"). Essentially, the current recursion depth check in ep_loop_check_proc() just serves to prevent it from recursing too deeply while checking for loops. A more thorough check is done in reverse_path_check() after the new graph edge has already been created; this checks, among other things, that no paths going upwards from any non-epoll file with a length of more than 5 edges exist. However, this check does not apply to non-epoll files. As a result, it is possible to recurse to a depth of at least roughly 500, tested on v6.15. (I am unsure if deeper recursion is possible; and this may have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion problem").) To fix it: 1. In ep_loop_check_proc(), note the subtree depth of each visited node, and use subtree depths for the total depth calculation even when a subtree has already been visited. 2. Add ep_get_upwards_depth_proc() for similarly determining the maximum depth of an upwards walk. 3. In ep_loop_check(), use these values to limit the total path length between epoll nodes to EP_MAX_NESTS edges.Show less

A vulnerability was found in libxml2 up to 2.14.5. It has been declared as problematic. This vulnerability affects the function xmlParseSGMLCatalog of the component xmlcatalog. The manipulation leads to uncontrolled recursion. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The code maintainer explains, that "[t]he issue can only be triggered with untrusted SGML catalogs and it makes absolutely no sense to use untrusted catalogs. I also doubt that anyone is still using SGML catalogs at all."Show less

NVIDIA Triton Inference Server for Windows and Linux contains a vulnerability where an attacker could cause uncontrolled recursion through a specially crafted input. A successful exploit of this vulnerability might lead to denial of service.Show less

An issue in Artifex mupdf 1.25.6, 1.25.5 allows a remote attacker to cause a denial of service via an infinite recursion in the `mutool clean` utility. When processing a crafted PDF file containing cyclic /Next references in the outline structure, the `strip_outline()` function enters infinite recursionShow less

In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix crash in timerlat_dump_stack() We have observed kernel panics when using timerlat with stack saving, with the following dmesg output: memcpy: detected buffer overflow: 88 byte write of buffer size 0 WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0 CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy) Call Trace: <TASK> ? trace_buffer_lock_reserve+0x2a/0x60 __fortify_panic+0xd/0xf __timerlat_dump_stack.cold+0xd/0xd timerlat_dump_stack.part.0+0x47/0x80 timerlat_fd_read+0x36d/0x390 vfs_read+0xe2/0x390 ? syscall_exit_to_user_mode+0x1d5/0x210 ksys_read+0x73/0xe0 do_syscall_64+0x7b/0x160 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e __timerlat_dump_stack() constructs the ftrace stack entry like this: struct stack_entry *entry; ... memcpy(&entry->caller, fstack->calls, size); entry->size = fstack->nr_entries; Since commit e7186af7fb26 ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure"), struct stack_entry marks its caller field with __counted_by(size). At the time of the memcpy, entry->size contains garbage from the ringbuffer, which under some circumstances is zero, triggering a kernel panic by buffer overflow. Populate the size field before the memcpy so that the out-of-bounds check knows the correct size. This is analogous to __ftrace_trace_stack().Show less

In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix infinite recursive call of clip_push(). syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in:Show less

Uncontrolled Recursion vulnerability in Apache Commons Lang. This issue affects Apache Commons Lang: Starting with commons-lang:commons-lang 2.0 to 2.6, and, from org.apache.commons:commons-lang3 3.0 before 3.18.0. The methods ClassUtils.getClass(...) can throw StackOverflowError on very long inputs. Because an Error is usually not handled by applications and libraries, a StackOverflowError could cause an application to stop. Users are recommended to upgrade to version 3.18.0, which fixes the issue.Show less

Connect2id Nimbus JOSE + JWT 10.0.x before 10.0.2 and 9.37.x before 9.37.4 allows a remote attacker to cause a denial of service via a deeply nested JSON object supplied in a JWT claim set, because of uncontrolled recursion. NOTE: this is independent of the Gson 2.11.0 issue because the Connect2id product could have checked the JSON object nesting depth, regardless of what limits (if any) were imposed by Gson.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Check dsbr size from EFI variable Since the size of struct btintel_dsbr is already known, we can just start there instead of querying the EFI variable size. If the final result doesn't match what we expect also fail. This fixes a stack buffer overflow when the EFI variable is larger than struct btintel_dsbr.Show less

The JSONReader in run-llama/llama_index versions 0.12.28 is vulnerable to a stack overflow due to uncontrolled recursive JSON parsing. This vulnerability allows attackers to trigger a Denial of Service (DoS) by submitting deeply nested JSON structures, leading to a RecursionError and crashing applications. The root cause is the unsafe recursive traversal design and lack of depth validation, which makes the JSONReader susceptible to stack overflow when processing deeply nested JSON. This impacts the availability of services, making them unreliable and disrupting workflows. The issue is resolved in version 0.12.38.Show less

MongoDB Server may be susceptible to stack overflow due to JSON parsing mechanism, where specifically crafted JSON inputs may induce unwarranted levels of recursion, resulting in excessive stack space consumption. Such inputs can lead to a stack overflow that causes the server to crash which could occur pre-authorisation. This issue affects MongoDB Server v7.0 versions prior to 7.0.17 and MongoDB Server v8.0 versions prior to 8.0.5. The same issue affects MongoDB Server v6.0 versions prior to 6.0.21, but an attacker can only induce denial of service after authenticating.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Optimize clearing the pending PMI and remove WARN_ON for PMI check in power_pmu_disable commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") added a new function "pmi_irq_pending" in hw_irq.h. This function is to check if there is a PMI marked as pending in Paca (PACA_IRQ_PMI).This is used in power_pmu_disable in a WARN_ON. The intention here is to provide a warning if there is PMI pending, but no counter is found overflown. During some of the perf runs, below warning is hit: WARNING: CPU: 36 PID: 0 at arch/powerpc/perf/core-book3s.c:1332 power_pmu_disable+0x25c/0x2c0 Modules linked in: ----- NIP [c000000000141c3c] power_pmu_disable+0x25c/0x2c0 LR [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 Call Trace: [c000000baffcfb90] [c000000000141c8c] power_pmu_disable+0x2ac/0x2c0 (unreliable) [c000000baffcfc10] [c0000000003e2f8c] perf_pmu_disable+0x4c/0x60 [c000000baffcfc30] [c0000000003e3344] group_sched_out.part.124+0x44/0x100 [c000000baffcfc80] [c0000000003e353c] __perf_event_disable+0x13c/0x240 [c000000baffcfcd0] [c0000000003dd334] event_function+0xc4/0x140 [c000000baffcfd20] [c0000000003d855c] remote_function+0x7c/0xa0 [c000000baffcfd50] [c00000000026c394] flush_smp_call_function_queue+0xd4/0x300 [c000000baffcfde0] [c000000000065b24] smp_ipi_demux_relaxed+0xa4/0x100 [c000000baffcfe20] [c0000000000cb2b0] xive_muxed_ipi_action+0x20/0x40 [c000000baffcfe40] [c000000000207c3c] __handle_irq_event_percpu+0x8c/0x250 [c000000baffcfee0] [c000000000207e2c] handle_irq_event_percpu+0x2c/0xa0 [c000000baffcff10] [c000000000210a04] handle_percpu_irq+0x84/0xc0 [c000000baffcff40] [c000000000205f14] generic_handle_irq+0x54/0x80 [c000000baffcff60] [c000000000015740] __do_irq+0x90/0x1d0 [c000000baffcff90] [c000000000016990] __do_IRQ+0xc0/0x140 [c0000009732f3940] [c000000bafceaca8] 0xc000000bafceaca8 [c0000009732f39d0] [c000000000016b78] do_IRQ+0x168/0x1c0 [c0000009732f3a00] [c0000000000090c8] hardware_interrupt_common_virt+0x218/0x220 This means that there is no PMC overflown among the active events in the PMU, but there is a PMU pending in Paca. The function "any_pmc_overflown" checks the PMCs on active events in cpuhw->n_events. Code snippet: <<>> if (any_pmc_overflown(cpuhw)) clear_pmi_irq_pending(); else WARN_ON(pmi_irq_pending()); <<>> Here the PMC overflown is not from active event. Example: When we do perf record, default cycles and instructions will be running on PMC6 and PMC5 respectively. It could happen that overflowed event is currently not active and pending PMI is for the inactive event. Debug logs from trace_printk: <<>> any_pmc_overflown: idx is 5: pmc value is 0xd9a power_pmu_disable: PMC1: 0x0, PMC2: 0x0, PMC3: 0x0, PMC4: 0x0, PMC5: 0xd9a, PMC6: 0x80002011 <<>> Here active PMC (from idx) is PMC5 , but overflown PMC is PMC6(0x80002011). When we handle PMI interrupt for such cases, if the PMC overflown is from inactive event, it will be ignored. Reference commit: commit bc09c219b2e6 ("powerpc/perf: Fix finding overflowed PMC in interrupt") Patch addresses two changes: 1) Fix 1 : Removal of warning ( WARN_ON(pmi_irq_pending()); ) We were printing warning if no PMC is found overflown among active PMU events, but PMI pending in PACA. But this could happen in cases where PMC overflown is not in active PMC. An inactive event could have caused the overflow. Hence the warning is not needed. To know pending PMI is from an inactive event, we need to loop through all PMC's which will cause more SPR reads via mfspr and increase in context switch. Also in existing function: perf_event_interrupt, already we ignore PMI's overflown when it is from an inactive PMC. 2) Fix 2: optimization in clearing pending PMI. Currently we check for any active PMC overflown before clearing PMI pending in Paca. This is causing additional SP ---truncated---Show less