Always-Incorrect Control Flow Implementation

An issue was discovered in musl libc 0.7.10 through 1.2.6. Stack-based memory corruption can occur during qsort of very large arrays, due to incorrectly implemented double-word primitives. The number of elements must exceed about seven million, i.e., the 32nd Leonardo number on 32-bit platforms (or the 64th Leonardo number on 64-bit platforms, which is not practical).Show less

Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a vulnerability where the compilation of the table.fill instruction can result in a host panic. This means that a valid guest can be compiled with Winch, on any architecture, and cause the host to panic. This represents a denial-of-service vulnerability in Wasmtime due to guests being able to trigger a panic. The specific issue is that a historical refactoring changed how compiled code referenced tables within the table.* instructions. This refactoring forgot to update the Winch code paths associated as well, meaning that Winch was using the wrong indexing scheme. Due to the feature support of Winch the only problem that can result is tables being mixed up or nonexistent tables being used, meaning that the guest is limited to panicking the host (using a nonexistent table), or executing spec-incorrect behavior and modifying the wrong table. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.Show less

A bug in POST request handling causes a crash under a certain condition. This issue affects Apache Traffic Server: from 10.0.0 through 10.1.1, from 9.0.0 through 9.2.12. Users are recommended to upgrade to version 10.1.2 or 9.2.13, which fix the issue. A workaround for older versions is to set proxy.config.http.request_buffer_enabled to 0 (the default value is 0).Show less

Nest is a framework for building scalable Node.js server-side applications. In versions 11.1.15 and below, a NestJS application using @nestjs/platform-fastify GET middleware can be bypassed because Fastify automatically redirects HEAD requests to the corresponding GET handlers (if they exist). As a result: middleware will be completely skipped, the HTTP response won't include a body (since the response is truncated when redirecting a HEAD request to a GET handler), and the actual handler will still be executed. This issue is fixed in version 11.1.16.Show less

PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, A logic error in the PX4 Autopilot MAVLink FTP session validation uses incorrect boolean logic (&& instead of ||), allowing BurstReadFile and WriteFile operations to proceed with invalid sessions or closed file descriptors. This enables an unauthenticated attacker to put the FTP subsystem into an inconsistent state, trigger operations on invalid file descriptors, and bypass session isolation checks. This vulnerability is fixed in 1.17.0-rc2.Show less

Always-Incorrect Control Flow Implementation vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-ENET/IP Ethernet Module FX5-ENET/IP versions 1.106 and prior and Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-EIP EtherNet/IP Module FX5-EIP versions 1.000 and prior allows a remote attacker to cause a denial-of-service (DoS) condition on the products by continuously sending UDP packets to the products. A system reset of the product is required for recovery.Show less

soroban-sdk is a Rust SDK for Soroban contracts. Prior to versions 22.0.10, 23.5.2, and 25.1.1, the `#[contractimpl]` macro contains a bug in how it wires up function calls. `#[contractimpl]` generates code that uses `MyContract::value()` style calls even when it's processing the trait version. This means if an inherent function is also defined with the same name, the inherent function gets called instead of the trait function. This means the Wasm-exported entry point silently calls the wrong function when two conditions are met simultaneously: First, an `impl Trait for MyContract` block is defined with one or more functions, with `#[contractimpl]` applied. Second, an `impl MyContract` block is defined with one or more identically named functions, without `#[contractimpl]` applied. If the trait version contains important security checks, such as verifying the caller is authorized, that the inherent version does not, those checks are bypassed. Anyone interacting with the contract through its public interface will call the wrong function. The problem is patched in `soroban-sdk-macros` versions 22.0.10, 23.5.2, and 25.1.1. The fix changes the generated call from `<Type>::func()` to `<Type as Trait>::func()` when processing trait implementations, ensuring Rust resolves to the trait associated function regardless of whether an inherent function with the same name exists. Users should upgrade to `soroban-sdk-macros` 22.0.10, 23.5.2, or 25.1.1 and recompile their contracts. If upgrading is not immediately possible, contract developers can avoid the issue by ensuring that no inherent associated function on the contract type shares a name with any function in the trait implementation. Renaming or removing the conflicting inherent function eliminates the ambiguity and causes the macro-generated code to correctly resolve to the trait function.Show less

A logic issue was addressed with improved state management. This issue is fixed in iOS 18.7 and iPadOS 18.7, iOS 26 and iPadOS 26, macOS Sequoia 15.7, macOS Sonoma 14.8, macOS Tahoe 26, tvOS 26, visionOS 26, watchOS 26. A UDP server socket bound to a local interface may become bound to all interfaces.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Prevent sending WMI commands to firmware during firmware crash Currently, we encounter the following kernel call trace when a firmware crash occurs. This happens because the host sends WMI commands to the firmware while it is in recovery, causing the commands to fail and resulting in the kernel call trace. Set the ATH12K_FLAG_CRASH_FLUSH and ATH12K_FLAG_RECOVERY flags when the host driver receives the firmware crash notification from MHI. This prevents sending WMI commands to the firmware during recovery. Call Trace: <TASK> dump_stack_lvl+0x75/0xc0 register_lock_class+0x6be/0x7a0 ? __lock_acquire+0x644/0x19a0 __lock_acquire+0x95/0x19a0 lock_acquire+0x265/0x310 ? ath12k_ce_send+0xa2/0x210 [ath12k] ? find_held_lock+0x34/0xa0 ? ath12k_ce_send+0x56/0x210 [ath12k] _raw_spin_lock_bh+0x33/0x70 ? ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_htc_send+0x178/0x390 [ath12k] ath12k_wmi_cmd_send_nowait+0x76/0xa0 [ath12k] ath12k_wmi_cmd_send+0x62/0x190 [ath12k] ath12k_wmi_pdev_bss_chan_info_request+0x62/0xc0 [ath1 ath12k_mac_op_get_survey+0x2be/0x310 [ath12k] ieee80211_dump_survey+0x99/0x240 [mac80211] nl80211_dump_survey+0xe7/0x470 [cfg80211] ? kmalloc_reserve+0x59/0xf0 genl_dumpit+0x24/0x70 netlink_dump+0x177/0x360 __netlink_dump_start+0x206/0x280 genl_family_rcv_msg_dumpit.isra.22+0x8a/0xe0 ? genl_family_rcv_msg_attrs_parse.isra.23+0xe0/0xe0 ? genl_op_lock.part.12+0x10/0x10 ? genl_dumpit+0x70/0x70 genl_rcv_msg+0x1d0/0x290 ? nl80211_del_station+0x330/0x330 [cfg80211] ? genl_get_cmd_both+0x50/0x50 netlink_rcv_skb+0x4f/0x100 genl_rcv+0x1f/0x30 netlink_unicast+0x1b6/0x260 netlink_sendmsg+0x31a/0x450 __sock_sendmsg+0xa8/0xb0 ____sys_sendmsg+0x1e4/0x260 ___sys_sendmsg+0x89/0xe0 ? local_clock_noinstr+0xb/0xc0 ? rcu_is_watching+0xd/0x40 ? kfree+0x1de/0x370 ? __sys_sendmsg+0x7a/0xc0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1Show less

KDE Konsole before 25.04.2 allows remote code execution in a certain scenario. It supports loading URLs from the scheme handlers such as a ssh:// or telnet:// or rlogin:// URL. This can be executed regardless of whether the ssh, telnet, or rlogin binary is available. In this mode, there is a code path where if that binary is not available, Konsole falls back to using /bin/bash for the given arguments (i.e., the URL) provided. This allows an attacker to execute arbitrary code.Show less

Missing validation of terminating delegation causes the client to continue searching the defined delegation list, even after searching a terminating delegation. This could cause the client to fetch a target from an incorrect source, altering the target contents. Users should upgrade to tough version 0.20.0 or later and ensure any forked or derivative code is patched to incorporate the new fixes.Show less

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix list iterator in fastrpc_req_mem_unmap_impl This is another instance of incorrect use of list iterator and checking it for NULL. The list iterator value 'map' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty (in this case, the check 'if (!map) {' will always be false and never exit as expected). To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'map' as a dedicated pointer to point to the found element. Without this patch, Kernel crashes with below trace: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000ffff7fb03750 ... Call trace: fastrpc_map_create+0x70/0x290 [fastrpc] fastrpc_req_mem_map+0xf0/0x2dc [fastrpc] fastrpc_device_ioctl+0x138/0xc60 [fastrpc] __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x28/0x90 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6) ---[ end trace 0000000000000000 ]---Show less

Hyperbridge is a hyper-scalable coprocessor for verifiable, cross-chain interoperability. A critical vulnerability was discovered in the ismp-grandpa crate, that allowed a malicious prover easily convince the verifier of the finality of arbitrary headers. This could be used to steal funds or compromise other kinds of cross-chain applications. This vulnerability is fixed in 15.0.1.Show less

Vyper is a Pythonic Smart Contract Language for the EVM. When the Vyper Compiler uses the precompiles EcRecover (0x1) and Identity (0x4), the success flag of the call is not checked. As a consequence an attacker can provide a specific amount of gas to make these calls fail but let the overall execution continue. Then the execution result can be incorrect. Based on EVM's rules, after the failed precompile the remaining code has only 1/64 of the pre-call-gas left (as 63/64 were forwarded and spent). Hence, only fairly simple executions can follow the failed precompile calls. Therefore, we found no significantly impacted real-world contracts. None the less an advisory has been made out of an abundance of caution. This issue is fixed in 0.4.1.Show less