A logic vulnerability was found in GStreamer's webrtcbin component. The _check_sdp_crypto() function contains an inverted boolean condition that causes it to accept remote SDP offers or answers that lack the required a=f...Show moreA logic vulnerability was found in GStreamer's webrtcbin component. The _check_sdp_crypto() function contains an inverted boolean condition that causes it to accept remote SDP offers or answers that lack the required a=fingerprint attribute, while incorrectly rejecting those that include it. An attacker with the ability to intercept and modify WebRTC signaling messages could exploit this to bypass the SDP-level DTLS certificate fingerprint binding, weakening defenses against man-in-the-middle attacks on media streams.Show less |
Capgo before 12.128.2 allows multiple public channels for the same app and platform to coexist simultaneously, while unnamed /updates requests without defaultChannel implicitly resolve to a single hidden winner channel....Show moreCapgo before 12.128.2 allows multiple public channels for the same app and platform to coexist simultaneously, while unnamed /updates requests without defaultChannel implicitly resolve to a single hidden winner channel. An authorized app or channel manager can create ambiguous default update state and silently influence which bundle unnamed clients receive, breaking release routing integrity and predictability.Show less |
The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code ch...Show moreThe IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was '((length/hop/source/target checks) && (icmp_hdr->code != 0))'. Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated 'length' is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet.Show less |
Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat meant that special roles and empty authorisation constraints were not included when the effective web.xml was logged.
This issue affects Apache...Show moreAlways-Incorrect Control Flow Implementation vulnerability in Apache Tomcat meant that special roles and empty authorisation constraints were not included when the effective web.xml was logged.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119 which fixes the issue.Show less |
Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat's rewrite valve meant that if the first condition in an OR chain matched, subsequent non-OR conditions were skipped.
This issue affects Apache...Show moreAlways-Incorrect Control Flow Implementation vulnerability in Apache Tomcat's rewrite valve meant that if the first condition in an OR chain matched, subsequent non-OR conditions were skipped.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119, which fix the issue.Show less |
Cap-go before 12.128.12 contains a broken cursor pagination vulnerability in the /private/devices endpoint on the Cloudflare/workerd path that allows authenticated attackers to cause duplicate-page loops and make later r...Show moreCap-go before 12.128.12 contains a broken cursor pagination vulnerability in the /private/devices endpoint on the Cloudflare/workerd path that allows authenticated attackers to cause duplicate-page loops and make later rows unreachable. Attackers with app.read_devices access can exploit non-advancing cursor filters to trigger infinite pagination loops, prevent dataset traversal, and cause repeated processing in device-management workflows.Show less |
JIT miscompilation in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 152 and Thunderbird 152. |
Roundcube Webmail 1.6.x before 1.6.16 and 1.7.x before 1.7.1 has insecure code evaluation logic in LDAP the autovalues option that could lead to code injection. (Support for code evaluation has been removed in 1.6.16 and...Show moreRoundcube Webmail 1.6.x before 1.6.16 and 1.7.x before 1.7.1 has insecure code evaluation logic in LDAP the autovalues option that could lead to code injection. (Support for code evaluation has been removed in 1.6.16 and 1.7.1.)Show less |
A vulnerability in the Border Gateway Protocol (BGP) enforce-first-as feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, re...Show moreA vulnerability in the Border Gateway Protocol (BGP) enforce-first-as feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to trigger BGP peer flaps, resulting in a denial of service (DoS) condition.
This vulnerability is due to incorrect parsing of a transitive BGP attribute. An attacker could exploit this vulnerability by sending a crafted BGP update through an established BGP peer session. If the update propagates to an affected device, it could cause the device to drop the BGP session and flap with the BGP peer that is forwarding this update, resulting in a DoS condition.Show less |
Multiple unauthenticated denial-of-service (DoS) issues in fohrloop dash-uploader v0.1.0 through v0.7.0a2. The chunked-upload handler (dash_uploader/httprequesthandler.py, dash_uploader/upload.py) trusts unsanitized, att...Show moreMultiple unauthenticated denial-of-service (DoS) issues in fohrloop dash-uploader v0.1.0 through v0.7.0a2. The chunked-upload handler (dash_uploader/httprequesthandler.py, dash_uploader/upload.py) trusts unsanitized, attacker-controlled upload parameters (e.g. flowTotalChunks) and does not enforce the documented max_file_size limit, allowing a remote, unauthenticated attacker to cause an out-of-memory (OOM) process crash (unbounded range(1, flowTotalChunks + 1) allocation), truncation of the target file to zero bytes (flowTotalChunks=0, where the all([]) == True quirk runs the file-assembly branch on zero chunks), permanent disk exhaustion (never-cleaned-up temporary directories per flowIdentifier), and a complete bypass of the documented max_file_size limit.Show less |
In uriparser before 1.0.2, the function family EqualsUri can misclassify two unequal URIs as equal. |
uuid before 14.0.0 can make unexpected writes when external output buffers are used, and the UUID version is 3, 5, or 6. In particular, UUID version 4, which is very commonly used, is unaffected by this issue. |
The cut utility in uutils coreutils incorrectly handles the -s (only-delimited) option when a newline character is specified as the delimiter. The implementation fails to verify the only_delimited flag in the cut_fields_...Show moreThe cut utility in uutils coreutils incorrectly handles the -s (only-delimited) option when a newline character is specified as the delimiter. The implementation fails to verify the only_delimited flag in the cut_fields_newline_char_delim function, causing the utility to print non-delimited lines that should have been suppressed. This can lead to unexpected data being passed to downstream scripts that rely on strict output filtering.Show less |
KDE Kleopatra before 26.08.0 on Windows allows local users to obtain the privileges of a Kleopatra user, because there is an error in the mechanism (KUniqueService) for ensuring that only one instance is running. |
The Data Sharing Framework (DSF) implements a distributed process engine based on the BPMN 2.0 and FHIR R4 standards. Prior to 2.1.0, The OIDC JWKS and Metadata Document caches used an inverted time comparison (isBefore...Show moreThe Data Sharing Framework (DSF) implements a distributed process engine based on the BPMN 2.0 and FHIR R4 standards. Prior to 2.1.0, The OIDC JWKS and Metadata Document caches used an inverted time comparison (isBefore instead of isAfter), causing the cache to never return cached values. Every incoming request triggered a fresh HTTP fetch of the OIDC Metadata Document and JWKS keys from the OIDC provider. The OIDC token cache for the FHIR client connections used an inverted time comparison (isBefore instead of isAfter), causing the cache to never invalidate. Every incoming request returned the same OIDC token even if expired. This vulnerability is fixed in 2.1.0.Show less |
A vulnerability was detected in lm-sys fastchat up to 0.2.36. Impacted is the function add_text of the component Arena Side-by-Side View Handler. The manipulation results in incorrect control flow. The attack can be laun...Show moreA vulnerability was detected in lm-sys fastchat up to 0.2.36. Impacted is the function add_text of the component Arena Side-by-Side View Handler. The manipulation results in incorrect control flow. The attack can be launched remotely. The exploit is now public and may be used. The root cause was fixed in commit 34eca62 for gradio_block_arena_named.py, but three other files were missed.Show less |
Luanti 5 before 5.15.2 sometimes allows unintended access to an insecure environment. If at least one mod is listed as secure.trusted_mods or secure.http_mods, then a crafted mod can intercept the request for the insecur...Show moreLuanti 5 before 5.15.2 sometimes allows unintended access to an insecure environment. If at least one mod is listed as secure.trusted_mods or secure.http_mods, then a crafted mod can intercept the request for the insecure environment or HTTP API, and also receive access to it.Show less |
Deadwood in MaraDNS 3.5.0036 allows attackers to exhaust connection slots via a zone whose authoritative nameserver address cannot be resolved. |
Varnish Cache 9 before 9.0.1 allows a "workspace overflow" denial of service (daemon panic) after timeout_linger. A malicious client could send an HTTP/1 request, wait long enough until the session releases its worker th...Show moreVarnish Cache 9 before 9.0.1 allows a "workspace overflow" denial of service (daemon panic) after timeout_linger. A malicious client could send an HTTP/1 request, wait long enough until the session releases its worker thread (timeout_linger) and resume traffic before the session is closed (timeout_idle) sending more than one request at once to trigger a pipelining operation between requests. This vulnerability affecting Varnish Cache 9.0.0 emerged from a port of the Varnish Enterprise non-blocking architecture for HTTP/2. New code was needed to adapt to a more recent workspace API that formalizes the pipelining operation. In addition to the workspace change on the Varnish Cache side, other differences created merge conflicts, like partial support for trailers in Varnish Enterprise. The conflict resolution missed one code path configuring pipelining to perform a complete workspace rollback, losing the guarantee that prefetched data would fit inside workspace_client during the transition from one request to the next. This can result in a workspace overflow, triggering a panic and crashing the Varnish server.Show less |
Varnish Cache 9 before 9.0.1 and Varnish Enterprise before 6.0.16r11 allows a "workspace overflow" denial of service (daemon panic) for certain amounts of prefetched data. The setup of an HTTP/2 session starts with a spe...Show moreVarnish Cache 9 before 9.0.1 and Varnish Enterprise before 6.0.16r11 allows a "workspace overflow" denial of service (daemon panic) for certain amounts of prefetched data. The setup of an HTTP/2 session starts with a speculative HTTP/1 transport, and upon upgrading to h2 the HTTP/1 request is repurposed as stream zero. During the upgrade, a buffer allocation is made to reserve space to send frames to the client. This allocation would split the original workspace, and depending on the amount of prefetched data, the next fetch could perform a pipelining operation that would run out of workspace.Show less |