Exposure of Resource to Wrong Sphere

D-Link DIR-868L B1 router firmware version FW2.05WWB02 contains an unauthenticated OS command injection vulnerability in the fileaccess.cgi component. The endpoint /dws/api/UploadFile accepts a pre_api_arg parameter that is passed directly to system-level shell execution functions without sanitization or authentication. Remote attackers can exploit this to execute arbitrary commands as root via crafted HTTP requests.Show less

In the Linux kernel, the following vulnerability has been resolved: arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack() `cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change to different stacks along with the Shadow Call Stack if it is enabled. Those two stack changes cannot be done atomically and both functions can be interrupted by SErrors or Debug Exceptions which, though unlikely, is very much broken : if interrupted, we can end up with mismatched stacks and Shadow Call Stack leading to clobbered stacks. In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task, but x18 stills points to the old task's SCS. When the interrupt handler tries to save the task's SCS pointer, it will save the old task SCS pointer (x18) into the new task struct (pointed to by SP_EL0), clobbering it. In `call_on_irq_stack()`, it can happen when switching from the task stack to the IRQ stack and when switching back. In both cases, we can be interrupted when the SCS pointer points to the IRQ SCS, but SP points to the task stack. The nested interrupt handler pushes its return addresses on the IRQ SCS. It then detects that SP points to the task stack, calls `call_on_irq_stack()` and clobbers the task SCS pointer with the IRQ SCS pointer, which it will also use ! This leads to tasks returning to addresses on the wrong SCS, or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK or FPAC if enabled. This is possible on a default config, but unlikely. However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and instead the GIC is responsible for filtering what interrupts the CPU should receive based on priority. Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very* frequently depending on the system configuration and workload, leading to unpredictable kernel panics. Completely mask DAIF in `cpu_switch_to()` and restore it when returning. Do the same in `call_on_irq_stack()`, but restore and mask around the branch. Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency of behaviour between all configurations. Introduce and use an assembly macro for saving and masking DAIF, as the existing one saves but only masks IF.Show less

A vulnerability was identified in Docker Desktop that allows local running Linux containers to access the Docker Engine API via the configured Docker subnet, at 192.168.65.7:2375 by default. This vulnerability occurs with or without Enhanced Container Isolation (ECI) enabled, and with or without the "Expose daemon on tcp://localhost:2375 without TLS" option enabled. This can lead to execution of a wide range of privileged commands to the engine API, including controlling other containers, creating new ones, managing images etc. In some circumstances (e.g. Docker Desktop for Windows with WSL backend) it also allows mounting the host drive with the same privileges as the user running Docker Desktop.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix kernel crash when hard resetting the GPU The GPU hard reset sequence calls pm_runtime_force_suspend() and pm_runtime_force_resume(), which according to their documentation should only be used during system-wide PM transitions to sleep states. The main issue though is that depending on some internal runtime PM state as seen by pm_runtime_force_suspend() (whether the usage count is <= 1), pm_runtime_force_resume() might not resume the device unless needed. If that happens, the runtime PM resume callback pvr_power_device_resume() is not called, the GPU clocks are not re-enabled, and the kernel crashes on the next attempt to access GPU registers as part of the power-on sequence. Replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to the driver's runtime PM callbacks, pvr_power_device_suspend() and pvr_power_device_resume(), to ensure clocks are re-enabled and avoid the kernel crash.Show less

Tyler Technologies ERP Pro 9 SaaS allows an authenticated user to escape the application and execute limited operating system commands within the remote Microsoft Windows environment with the privileges of the authenticated user. Tyler Technologies deployed hardened remote Windows environment settings to all ERP Pro 9 SaaS customer environments as of 2025-08-01.Show less

The WebAssembly Micro Runtime's (WAMR) iwasm package is the executable binary built with WAMR VMcore which supports WebAssembly System Interface (WASI) and command line interface. In versions 2.4.0 and below, iwasm uses --addr-pool with an IPv4 address that lacks a subnet mask, allowing the system to accept all IP addresses. This can unintentionally expose the service to all incoming connections and bypass intended access restrictions. Services relying on --addr-pool for restricting access by IP may unintentionally become open to all external connections. This may lead to unauthorized access in production deployments, especially when users assume that specifying an IP without a subnet mask implies a default secure configuration. This is fixed in version 2.4.1.Show less

In OceanBase's Oracle tenant mode, a malicious user with specific privileges can achieve privilege escalation to SYS-level access by executing carefully crafted commands. This vulnerability only affects OceanBase tenants in Oracle mode. Tenants in MySQL mode are unaffected.Show less

A remote file disclosure vulnerability exists in EasyCafe Server 2.2.14, exploitable by unauthenticated remote attackers via TCP port 831. The server listens for a custom protocol where opcode 0x43 can be used to request arbitrary files by absolute path. If the file exists and is accessible, its content is returned without authentication. This flaw allows attackers to retrieve sensitive files such as system configuration, password files, or application data.Show less

A CWE-668: Exposure of Resource to Wrong Sphere vulnerability exists that exposes TGML diagram resources to the wrong control sphere, providing other authenticated users with potentially inappropriate access to TGML diagrams.Show less

A cloud infrastructure misconfiguration in OneLogin AD Connector results in log data being sent to a hardcoded S3 bucket (onelogin-adc-logs-production) without validating bucket ownership. An attacker who registers this unclaimed bucket can begin receiving log files from other OneLogin tenants. These logs may contain sensitive data such as directory tokens, user metadata, and environment configuration. This enables cross-tenant leakage of secrets, potentially allowing JWT signing key recovery and user impersonation.Show less

Quarkus is a Cloud Native, (Linux) Container First framework for writing Java applications. In versions prior to 3.24.1, 3.20.2, and 3.15.6, there is a potential data leak when duplicating a duplicated context. Quarkus extensively uses the Vert.x duplicated context to implement context propagation. With the new semantic data from one transaction can leak to the data from another transaction. From a Vert.x point of view, this new semantic clarifies the behavior. A significant amount of data is stored in the duplicated context, including request scope, security details, and metadata. Duplicating a duplicated context is rather rare and is only done in a few places. This issue has been patched in version 3.24.1, 3.20.2, and 3.15.6.Show less

In the Linux kernel, the following vulnerability has been resolved: riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not available, the kernel crashes: Oops - illegal instruction [#1] [snip] epc : set_tagged_addr_ctrl+0x112/0x15a ra : set_tagged_addr_ctrl+0x74/0x15a epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10 [snip] status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002 set_tagged_addr_ctrl+0x112/0x15a __riscv_sys_prctl+0x352/0x73c do_trap_ecall_u+0x17c/0x20c andle_exception+0x150/0x15c Fix it by checking if Supm is available.Show less

Improper Verification of Source of a Communication Channel in Work Desktop for Mac versions 10.8.1.46 and earlier allows attackers to execute arbitrary commands via unauthorized access to the Agent service.  This has been remediated in Work Desktop for Mac version 10.8.2.33.Show less

XWiki Platform is a generic wiki platform. A vulnerability in versions from 5.0 to 16.7.1 affects users with Message Stream enabled and a wiki configured as closed from selecting "Prevent unregistered users to view pages" in the Administrations Rights. The vulnerability is that any message sent in a subwiki to "everyone" is actually sent to the farm: any visitor of the main wiki will be able to see that message through the Dashboard, even if the subwiki is configured to be private. This issue will not be patched as Message Stream has been deprecated in XWiki 16.8.0RC1 and is not maintained anymore. A workaround for this issue involves keeping Message Stream disabled by default. It's advised to keep it disabled from Administration > Social > Message Stream.Show less

In the Linux kernel, the following vulnerability has been resolved: riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler Naresh Kamboju reported a "Bad frame pointer" kernel warning while running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the same issue with the following command: ``` $ cd /sys/kernel/debug/tracing $ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events $ echo 1 > events/fprobes/enable $ echo 1 > tracing_on $ sleep 1 ``` And we can get the following kernel warning: [ 127.692888] ------------[ cut here ]------------ [ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000 [ 127.693755] from func do_nanosleep return to ffffffff800ccb16 [ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be [ 127.699894] Modules linked in: [ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32 [ 127.701453] Hardware name: riscv-virtio,qemu (DT) [ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be [ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be [ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10 [ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000 [ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80 [ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20 [ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0 [ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068 [ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001 [ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e [ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18 [ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 127.703292] [<ffffffff8013b5e0>] ftrace_return_to_handler+0x1b2/0x1be [ 127.703760] [<ffffffff80017bce>] return_to_handler+0x16/0x26 [ 127.704009] [<ffffffff80017bb8>] return_to_handler+0x0/0x26 [ 127.704057] [<ffffffff800d3352>] common_nsleep+0x42/0x54 [ 127.704117] [<ffffffff800d44a2>] __riscv_sys_clock_nanosleep+0xba/0x10a [ 127.704176] [<ffffffff80901c56>] do_trap_ecall_u+0x188/0x218 [ 127.704295] [<ffffffff8090cc3e>] handle_exception+0x14a/0x156 [ 127.705436] ---[ end trace 0000000000000000 ]--- The reason is that the stack layout for constructing argument for the ftrace_return_to_handler in the return_to_handler does not match the __arch_ftrace_regs structure of riscv, leading to unexpected results.Show less

Jupyter Remote Desktop Proxy allows you to run a Linux Desktop on a JupyterHub. jupyter-remote-desktop-proxy was meant to rely on UNIX sockets readable only by the current user since version 3.0.0, but when used with TigerVNC, the VNC server started by jupyter-remote-desktop-proxy were still accessible via the network. This vulnerability does not affect users having TurboVNC as the vncserver executable. This issue is fixed in 3.0.1.Show less

Following the recent Chrome sandbox escape (CVE-2025-2783), various Firefox developers identified a similar pattern in our IPC code. A compromised child process could cause the parent process to return an unintentionally powerful handle, leading to a sandbox escape. The original vulnerability was being exploited in the wild. *This only affects Firefox on Windows. Other operating systems are unaffected.*. This vulnerability was fixed in Firefox 136.0.4, Firefox ESR 128.8.1, and Firefox ESR 115.21.1.Show less

In the Linux kernel, the following vulnerability has been resolved: media: i2c: max9286: fix kernel oops when removing module When removing the max9286 module we get a kernel oops: Unable to handle kernel paging request at virtual address 000000aa00000094 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000880d85000 [000000aa00000094] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: fsl_jr_uio caam_jr rng_core libdes caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine max9271 authenc crct10dif_ce mxc_jpeg_encdec CPU: 2 PID: 713 Comm: rmmod Tainted: G C 5.15.5-00057-gaebcd29c8ed7-dirty #5 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : i2c_mux_del_adapters+0x24/0xf0 lr : max9286_remove+0x28/0xd0 [max9286] sp : ffff800013a9bbf0 x29: ffff800013a9bbf0 x28: ffff00080b6da940 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000801a5b970 x22: ffff0008048b0890 x21: ffff800009297000 x20: ffff0008048b0f70 x19: 000000aa00000064 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000014 x13: 0000000000000000 x12: ffff000802da49e8 x11: ffff000802051918 x10: ffff000802da4920 x9 : ffff000800030098 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffffffffffffffff x1 : ffff00080b6da940 x0 : 0000000000000000 Call trace: i2c_mux_del_adapters+0x24/0xf0 max9286_remove+0x28/0xd0 [max9286] i2c_device_remove+0x40/0x110 __device_release_driver+0x188/0x234 driver_detach+0xc4/0x150 bus_remove_driver+0x60/0xe0 driver_unregister+0x34/0x64 i2c_del_driver+0x58/0xa0 max9286_i2c_driver_exit+0x1c/0x490 [max9286] __arm64_sys_delete_module+0x194/0x260 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x2c/0x94 el0_svc+0x28/0x80 el0t_64_sync_handler+0xa8/0x130 el0t_64_sync+0x1a0/0x1a4 The Oops happens because the I2C client data does not point to max9286_priv anymore but to v4l2_subdev. The change happened in max9286_init() which calls v4l2_i2c_subdev_init() later on... Besides fixing the max9286_remove() function, remove the call to i2c_set_clientdata() in max9286_probe(), to avoid confusion, and make the necessary changes to max9286_init() so that it doesn't have to use i2c_get_clientdata() in order to fetch the pointer to priv.Show less

Meshtastic is an open source mesh networking solution. In affected firmware versions crafted packets over MQTT are able to appear as a DM in client to a node even though they were not decoded with PKC. This issue has been addressed in version 2.5.19 and all users are advised to upgrade. There are no known workarounds for this vulnerability.Show less