Improper Locking

In the Linux kernel, the following vulnerability has been resolved: ptr_ring: do not block hard interrupts in ptr_ring_resize_multiple() Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page() to increase test coverage. syzbot found a splat caused by hard irq blocking in ptr_ring_resize_multiple() [1] As current users of ptr_ring_resize_multiple() do not require hard irqs being masked, replace it to only block BH. Rename helpers to better reflect they are safe against BH only. - ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh() - skb_array_resize_multiple() to skb_array_resize_multiple_bh() [1] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Modules linked in: CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline] RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85 RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083 RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000 RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843 RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040 R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tun_ptr_free drivers/net/tun.c:617 [inline] __ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline] ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline] tun_queue_resize drivers/net/tun.c:3694 [inline] tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024 do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923 rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201 rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550Show less

In the Linux kernel, the following vulnerability has been resolved: memcg: fix soft lockup in the OOM process A soft lockup issue was found in the product with about 56,000 tasks were in the OOM cgroup, it was traversing them when the soft lockup was triggered. watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066] CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G Hardware name: Huawei Cloud OpenStack Nova, BIOS RIP: 0010:console_unlock+0x343/0x540 RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247 RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0 R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: vprintk_emit+0x193/0x280 printk+0x52/0x6e dump_task+0x114/0x130 mem_cgroup_scan_tasks+0x76/0x100 dump_header+0x1fe/0x210 oom_kill_process+0xd1/0x100 out_of_memory+0x125/0x570 mem_cgroup_out_of_memory+0xb5/0xd0 try_charge+0x720/0x770 mem_cgroup_try_charge+0x86/0x180 mem_cgroup_try_charge_delay+0x1c/0x40 do_anonymous_page+0xb5/0x390 handle_mm_fault+0xc4/0x1f0 This is because thousands of processes are in the OOM cgroup, it takes a long time to traverse all of them. As a result, this lead to soft lockup in the OOM process. To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks' function per 1000 iterations. For global OOM, call 'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix hang during unmount when block group reclaim task is running When we start an unmount, at close_ctree(), if we have the reclaim task running and in the middle of a data block group relocation, we can trigger a deadlock when stopping an async reclaim task, producing a trace like the following: [629724.498185] task:kworker/u16:7 state:D stack: 0 pid:681170 ppid: 2 flags:0x00004000 [629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [629724.501267] Call Trace: [629724.501759] <TASK> [629724.502174] __schedule+0x3cb/0xed0 [629724.502842] schedule+0x4e/0xb0 [629724.503447] btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs] [629724.504534] ? prepare_to_wait_exclusive+0xc0/0xc0 [629724.505442] flush_space+0x423/0x630 [btrfs] [629724.506296] ? rcu_read_unlock_trace_special+0x20/0x50 [629724.507259] ? lock_release+0x220/0x4a0 [629724.507932] ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs] [629724.508940] ? do_raw_spin_unlock+0x4b/0xa0 [629724.509688] btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs] [629724.510922] process_one_work+0x252/0x5a0 [629724.511694] ? process_one_work+0x5a0/0x5a0 [629724.512508] worker_thread+0x52/0x3b0 [629724.513220] ? process_one_work+0x5a0/0x5a0 [629724.514021] kthread+0xf2/0x120 [629724.514627] ? kthread_complete_and_exit+0x20/0x20 [629724.515526] ret_from_fork+0x22/0x30 [629724.516236] </TASK> [629724.516694] task:umount state:D stack: 0 pid:719055 ppid:695412 flags:0x00004000 [629724.518269] Call Trace: [629724.518746] <TASK> [629724.519160] __schedule+0x3cb/0xed0 [629724.519835] schedule+0x4e/0xb0 [629724.520467] schedule_timeout+0xed/0x130 [629724.521221] ? lock_release+0x220/0x4a0 [629724.521946] ? lock_acquired+0x19c/0x420 [629724.522662] ? trace_hardirqs_on+0x1b/0xe0 [629724.523411] __wait_for_common+0xaf/0x1f0 [629724.524189] ? usleep_range_state+0xb0/0xb0 [629724.524997] __flush_work+0x26d/0x530 [629724.525698] ? flush_workqueue_prep_pwqs+0x140/0x140 [629724.526580] ? lock_acquire+0x1a0/0x310 [629724.527324] __cancel_work_timer+0x137/0x1c0 [629724.528190] close_ctree+0xfd/0x531 [btrfs] [629724.529000] ? evict_inodes+0x166/0x1c0 [629724.529510] generic_shutdown_super+0x74/0x120 [629724.530103] kill_anon_super+0x14/0x30 [629724.530611] btrfs_kill_super+0x12/0x20 [btrfs] [629724.531246] deactivate_locked_super+0x31/0xa0 [629724.531817] cleanup_mnt+0x147/0x1c0 [629724.532319] task_work_run+0x5c/0xa0 [629724.532984] exit_to_user_mode_prepare+0x1a6/0x1b0 [629724.533598] syscall_exit_to_user_mode+0x16/0x40 [629724.534200] do_syscall_64+0x48/0x90 [629724.534667] entry_SYSCALL_64_after_hwframe+0x44/0xae [629724.535318] RIP: 0033:0x7fa2b90437a7 [629724.535804] RSP: 002b:00007ffe0b7e4458 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [629724.536912] RAX: 0000000000000000 RBX: 00007fa2b9182264 RCX: 00007fa2b90437a7 [629724.538156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000555d6cf20dd0 [629724.539053] RBP: 0000555d6cf20ba0 R08: 0000000000000000 R09: 00007ffe0b7e3200 [629724.539956] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [629724.540883] R13: 0000555d6cf20dd0 R14: 0000555d6cf20cb0 R15: 0000000000000000 [629724.541796] </TASK> This happens because: 1) Before entering close_ctree() we have the async block group reclaim task running and relocating a data block group; 2) There's an async metadata (or data) space reclaim task running; 3) We enter close_ctree() and park the cleaner kthread; 4) The async space reclaim task is at flush_space() and runs all the existing delayed iputs; 5) Before the async space reclaim task calls btrfs_wait_on_delayed_iputs(), the block group reclaim task which is doing the data block group relocation, creates a delayed iput at replace_file_extents() (called when COWing leaves that have file extent items pointing to relocated data exten ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix sleep from invalid context BUG Taking the qos_mutex to process RoCEv2 QP's on netdev events causes a kernel splat. Fix this by removing the handling for RoCEv2 in irdma_cm_teardown_connections that uses the mutex. This handling is only needed for iWARP to avoid having connections established while the link is down or having connections remain functional after the IP address is removed. BUG: sleeping function called from invalid context at kernel/locking/mutex. Call Trace: kernel: dump_stack+0x66/0x90 kernel: ___might_sleep.cold.92+0x8d/0x9a kernel: mutex_lock+0x1c/0x40 kernel: irdma_cm_teardown_connections+0x28e/0x4d0 [irdma] kernel: ? check_preempt_curr+0x7a/0x90 kernel: ? select_idle_sibling+0x22/0x3c0 kernel: ? select_task_rq_fair+0x94c/0xc90 kernel: ? irdma_exec_cqp_cmd+0xc27/0x17c0 [irdma] kernel: ? __wake_up_common+0x7a/0x190 kernel: irdma_if_notify+0x3cc/0x450 [irdma] kernel: ? sched_clock_cpu+0xc/0xb0 kernel: irdma_inet6addr_event+0xc6/0x150 [irdma]Show less

In the Linux kernel, the following vulnerability has been resolved: ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between concurrent dio writes when low on free data space When reserving data space for a direct IO write we can end up deadlocking if we have multiple tasks attempting a write to the same file range, there are multiple extents covered by that file range, we are low on available space for data and the writes don't expand the inode's i_size. The deadlock can happen like this: 1) We have a file with an i_size of 1M, at offset 0 it has an extent with a size of 128K and at offset 128K it has another extent also with a size of 128K; 2) Task A does a direct IO write against file range [0, 256K), and because the write is within the i_size boundary, it takes the inode's lock (VFS level) in shared mode; 3) Task A locks the file range [0, 256K) at btrfs_dio_iomap_begin(), and then gets the extent map for the extent covering the range [0, 128K). At btrfs_get_blocks_direct_write(), it creates an ordered extent for that file range ([0, 128K)); 4) Before returning from btrfs_dio_iomap_begin(), it unlocks the file range [0, 256K); 5) Task A executes btrfs_dio_iomap_begin() again, this time for the file range [128K, 256K), and locks the file range [128K, 256K); 6) Task B starts a direct IO write against file range [0, 256K) as well. It also locks the inode in shared mode, as it's within the i_size limit, and then tries to lock file range [0, 256K). It is able to lock the subrange [0, 128K) but then blocks waiting for the range [128K, 256K), as it is currently locked by task A; 7) Task A enters btrfs_get_blocks_direct_write() and tries to reserve data space. Because we are low on available free space, it triggers the async data reclaim task, and waits for it to reserve data space; 8) The async reclaim task decides to wait for all existing ordered extents to complete (through btrfs_wait_ordered_roots()). It finds the ordered extent previously created by task A for the file range [0, 128K) and waits for it to complete; 9) The ordered extent for the file range [0, 128K) can not complete because it blocks at btrfs_finish_ordered_io() when trying to lock the file range [0, 128K). This results in a deadlock, because: - task B is holding the file range [0, 128K) locked, waiting for the range [128K, 256K) to be unlocked by task A; - task A is holding the file range [128K, 256K) locked and it's waiting for the async data reclaim task to satisfy its space reservation request; - the async data reclaim task is waiting for ordered extent [0, 128K) to complete, but the ordered extent can not complete because the file range [0, 128K) is currently locked by task B, which is waiting on task A to unlock file range [128K, 256K) and task A waiting on the async data reclaim task. This results in a deadlock between 4 task: task A, task B, the async data reclaim task and the task doing ordered extent completion (a work queue task). This type of deadlock can sporadically be triggered by the test case generic/300 from fstests, and results in a stack trace like the following: [12084.033689] INFO: task kworker/u16:7:123749 blocked for more than 241 seconds. [12084.034877] Not tainted 5.18.0-rc2-btrfs-next-115 #1 [12084.035562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [12084.036548] task:kworker/u16:7 state:D stack: 0 pid:123749 ppid: 2 flags:0x00004000 [12084.036554] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [12084.036599] Call Trace: [12084.036601] <TASK> [12084.036606] __schedule+0x3cb/0xed0 [12084.036616] schedule+0x4e/0xb0 [12084.036620] btrfs_start_ordered_extent+0x109/0x1c0 [btrfs] [12084.036651] ? prepare_to_wait_exclusive+0xc0/0xc0 [12084.036659] btrfs_run_ordered_extent_work+0x1a/0x30 [btrfs] [12084.036688] btrfs_work_helper+0xf8/0x400 [btrfs] [12084.0367 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Move cfg_log_verbose check before calling lpfc_dmp_dbg() In an attempt to log message 0126 with LOG_TRACE_EVENT, the following hard lockup call trace hangs the system. Call Trace: _raw_spin_lock_irqsave+0x32/0x40 lpfc_dmp_dbg.part.32+0x28/0x220 [lpfc] lpfc_cmpl_els_fdisc+0x145/0x460 [lpfc] lpfc_sli_cancel_jobs+0x92/0xd0 [lpfc] lpfc_els_flush_cmd+0x43c/0x670 [lpfc] lpfc_els_flush_all_cmd+0x37/0x60 [lpfc] lpfc_sli4_async_event_proc+0x956/0x1720 [lpfc] lpfc_do_work+0x1485/0x1d70 [lpfc] kthread+0x112/0x130 ret_from_fork+0x1f/0x40 Kernel panic - not syncing: Hard LOCKUP The same CPU tries to claim the phba->port_list_lock twice. Move the cfg_log_verbose checks as part of the lpfc_printf_vlog() and lpfc_printf_log() macros before calling lpfc_dmp_dbg(). There is no need to take the phba->port_list_lock within lpfc_dmp_dbg().Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix SCSI I/O completion and abort handler deadlock During stress I/O tests with 500+ vports, hard LOCKUP call traces are observed. CPU A: native_queued_spin_lock_slowpath+0x192 _raw_spin_lock_irqsave+0x32 lpfc_handle_fcp_err+0x4c6 lpfc_fcp_io_cmd_wqe_cmpl+0x964 lpfc_sli4_fp_handle_cqe+0x266 __lpfc_sli4_process_cq+0x105 __lpfc_sli4_hba_process_cq+0x3c lpfc_cq_poll_hdler+0x16 irq_poll_softirq+0x76 __softirqentry_text_start+0xe4 irq_exit+0xf7 do_IRQ+0x7f CPU B: native_queued_spin_lock_slowpath+0x5b _raw_spin_lock+0x1c lpfc_abort_handler+0x13e scmd_eh_abort_handler+0x85 process_one_work+0x1a7 worker_thread+0x30 kthread+0x112 ret_from_fork+0x1f Diagram of lockup: CPUA CPUB ---- ---- lpfc_cmd->buf_lock phba->hbalock lpfc_cmd->buf_lock phba->hbalock Fix by reordering the taking of the lpfc_cmd->buf_lock and phba->hbalock in lpfc_abort_handler routine so that it tries to take the lpfc_cmd->buf_lock first before phba->hbalock.Show less

In the Linux kernel, the following vulnerability has been resolved: loop: implement ->free_disk Ensure that the lo_device which is stored in the gendisk private data is valid until the gendisk is freed. Currently the loop driver uses a lot of effort to make sure a device is not freed when it is still in use, but to to fix a potential deadlock this will be relaxed a bit soon.Show less

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: prevent kernel crash when rmmod mtk-vcodec-dec.ko If the driver support subdev mode, the parameter "dev->pm.dev" will be NULL in mtk_vcodec_dec_remove. Kernel will crash when try to rmmod mtk-vcodec-dec.ko. [ 4380.702726] pc : do_raw_spin_trylock+0x4/0x80 [ 4380.707075] lr : _raw_spin_lock_irq+0x90/0x14c [ 4380.711509] sp : ffff80000819bc10 [ 4380.714811] x29: ffff80000819bc10 x28: ffff3600c03e4000 x27: 0000000000000000 [ 4380.721934] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 4380.729057] x23: ffff3600c0f34930 x22: ffffd5e923549000 x21: 0000000000000220 [ 4380.736179] x20: 0000000000000208 x19: ffffd5e9213e8ebc x18: 0000000000000020 [ 4380.743298] x17: 0000002000000000 x16: ffffd5e9213e8e90 x15: 696c346f65646976 [ 4380.750420] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 [ 4380.757542] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 4380.764664] x8 : 0000000000000000 x7 : ffff3600c7273ae8 x6 : ffffd5e9213e8ebc [ 4380.771786] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 [ 4380.778908] x2 : 0000000000000000 x1 : ffff3600c03e4000 x0 : 0000000000000208 [ 4380.786031] Call trace: [ 4380.788465] do_raw_spin_trylock+0x4/0x80 [ 4380.792462] __pm_runtime_disable+0x2c/0x1b0 [ 4380.796723] mtk_vcodec_dec_remove+0x5c/0xa0 [mtk_vcodec_dec] [ 4380.802466] platform_remove+0x2c/0x60 [ 4380.806204] __device_release_driver+0x194/0x250 [ 4380.810810] driver_detach+0xc8/0x15c [ 4380.814462] bus_remove_driver+0x5c/0xb0 [ 4380.818375] driver_unregister+0x34/0x64 [ 4380.822288] platform_driver_unregister+0x18/0x24 [ 4380.826979] mtk_vcodec_dec_driver_exit+0x1c/0x888 [mtk_vcodec_dec] [ 4380.833240] __arm64_sys_delete_module+0x190/0x224 [ 4380.838020] invoke_syscall+0x48/0x114 [ 4380.841760] el0_svc_common.constprop.0+0x60/0x11c [ 4380.846540] do_el0_svc+0x28/0x90 [ 4380.849844] el0_svc+0x4c/0x100 [ 4380.852975] el0t_64_sync_handler+0xec/0xf0 [ 4380.857148] el0t_64_sync+0x190/0x194 [ 4380.860801] Code: 94431515 17ffffca d503201f d503245f (b9400004)Show less

In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix firmware activation deadlock scenarios Lockdep reports the following deadlock scenarios for CXL root device power-management, device_prepare(), operations, and device_shutdown() operations for 'nd_region' devices: Chain exists of: &nvdimm_region_key --> &nvdimm_bus->reconfig_mutex --> system_transition_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(system_transition_mutex); lock(&nvdimm_bus->reconfig_mutex); lock(system_transition_mutex); lock(&nvdimm_region_key); Chain exists of: &cxl_nvdimm_bridge_key --> acpi_scan_lock --> &cxl_root_key Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cxl_root_key); lock(acpi_scan_lock); lock(&cxl_root_key); lock(&cxl_nvdimm_bridge_key); These stem from holding nvdimm_bus_lock() over hibernate_quiet_exec() which walks the entire system device topology taking device_lock() along the way. The nvdimm_bus_lock() is protecting against unregistration, multiple simultaneous ops callers, and preventing activate_show() from racing activate_store(). For the first 2, the lock is redundant. Unregistration already flushes all ops users, and sysfs already prevents multiple threads to be active in an ops handler at the same time. For the last userspace should already be waiting for its last activate_store() to complete, and does not need activate_show() to flush the write side, so this lock usage can be deleted in these attributes.Show less

In the Linux kernel, the following vulnerability has been resolved: tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() The sysfs sriov_numvfs_store() path acquires the device lock before the config space access lock: sriov_numvfs_store device_lock # A (1) acquire device lock sriov_configure vfio_pci_sriov_configure # (for example) vfio_pci_core_sriov_configure pci_disable_sriov sriov_disable pci_cfg_access_lock pci_wait_cfg # B (4) wait for dev->block_cfg_access == 0 Previously, pci_dev_lock() acquired the config space access lock before the device lock: pci_dev_lock pci_cfg_access_lock dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1 device_lock # A (3) wait for device lock Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may deadlock with sriov_numvfs_store() if the operations occur in the sequence (1) (2) (3) (4). Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires the device lock before the config space access lock, the same as the sriov_numvfs_store() path. [bhelgaas: combined and adapted commit log from Jay Zhou's independent subsequent posting: https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com]Show less

In the Linux kernel, the following vulnerability has been resolved: block: Fix potential deadlock in blk_ia_range_sysfs_show() When being read, a sysfs attribute is already protected against removal with the kobject node active reference counter. As a result, in blk_ia_range_sysfs_show(), there is no need to take the queue sysfs lock when reading the value of a range attribute. Using the queue sysfs lock in this function creates a potential deadlock situation with the disk removal, something that a lockdep signals with a splat when the device is removed: [ 760.703551] Possible unsafe locking scenario: [ 760.703551] [ 760.703554] CPU0 CPU1 [ 760.703556] ---- ---- [ 760.703558] lock(&q->sysfs_lock); [ 760.703565] lock(kn->active#385); [ 760.703573] lock(&q->sysfs_lock); [ 760.703579] lock(kn->active#385); [ 760.703587] [ 760.703587] *** DEADLOCK *** Solve this by removing the mutex_lock()/mutex_unlock() calls from blk_ia_range_sysfs_show().Show less

In the Linux kernel, the following vulnerability has been resolved: driver core: Fix wait_for_device_probe() & deferred_probe_timeout interaction Mounting NFS rootfs was timing out when deferred_probe_timeout was non-zero [1]. This was because ip_auto_config() initcall times out waiting for the network interfaces to show up when deferred_probe_timeout was non-zero. While ip_auto_config() calls wait_for_device_probe() to make sure any currently running deferred probe work or asynchronous probe finishes, that wasn't sufficient to account for devices being deferred until deferred_probe_timeout. Commit 35a672363ab3 ("driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires") tried to fix that by making sure wait_for_device_probe() waits for deferred_probe_timeout to expire before returning. However, if wait_for_device_probe() is called from the kernel_init() context: - Before deferred_probe_initcall() [2], it causes the boot process to hang due to a deadlock. - After deferred_probe_initcall() [3], it blocks kernel_init() from continuing till deferred_probe_timeout expires and beats the point of deferred_probe_timeout that's trying to wait for userspace to load modules. Neither of this is good. So revert the changes to wait_for_device_probe(). [1] - https://lore.kernel.org/lkml/TYAPR01MB45443DF63B9EF29054F7C41FD8C60@TYAPR01MB4544.jpnprd01.prod.outlook.com/ [2] - https://lore.kernel.org/lkml/YowHNo4sBjr9ijZr@dev-arch.thelio-3990X/ [3] - https://lore.kernel.org/lkml/Yo3WvGnNk3LvLb7R@linutronix.de/Show less

In the Linux kernel, the following vulnerability has been resolved: driver core: fix deadlock in __device_attach In __device_attach function, The lock holding logic is as follows: ... __device_attach device_lock(dev) // get lock dev async_schedule_dev(__device_attach_async_helper, dev); // func async_schedule_node async_schedule_node_domain(func) entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC); /* when fail or work limit, sync to execute func, but __device_attach_async_helper will get lock dev as well, which will lead to A-A deadlock. */ if (!entry || atomic_read(&entry_count) > MAX_WORK) { func; else queue_work_node(node, system_unbound_wq, &entry->work) device_unlock(dev) As shown above, when it is allowed to do async probes, because of out of memory or work limit, async work is not allowed, to do sync execute instead. it will lead to A-A deadlock because of __device_attach_async_helper getting lock dev. To fix the deadlock, move the async_schedule_dev outside device_lock, as we can see, in async_schedule_node_domain, the parameter of queue_work_node is system_unbound_wq, so it can accept concurrent operations. which will also not change the code logic, and will not lead to deadlock.Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail. For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this. [ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 00000000000 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: bcache: avoid journal no-space deadlock by reserving 1 journal bucket The journal no-space deadlock was reported time to time. Such deadlock can happen in the following situation. When all journal buckets are fully filled by active jset with heavy write I/O load, the cache set registration (after a reboot) will load all active jsets and inserting them into the btree again (which is called journal replay). If a journaled bkey is inserted into a btree node and results btree node split, new journal request might be triggered. For example, the btree grows one more level after the node split, then the root node record in cache device super block will be upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no space in journal buckets, the journal replay has to wait for new journal bucket to be reclaimed after at least one journal bucket replayed. This is one example that how the journal no-space deadlock happens. The solution to avoid the deadlock is to reserve 1 journal bucket in run time, and only permit the reserved journal bucket to be used during cache set registration procedure for things like journal replay. Then the journal space will never be fully filled, there is no chance for journal no-space deadlock to happen anymore. This patch adds a new member "bool do_reserve" in struct journal, it is inititalized to 0 (false) when struct journal is allocated, and set to 1 (true) by bch_journal_space_reserve() when all initialization done in run_cache_set(). In the run time when journal_reclaim() tries to allocate a new journal bucket, free_journal_buckets() is called to check whether there are enough free journal buckets to use. If there is only 1 free journal bucket and journal->do_reserve is 1 (true), the last bucket is reserved and free_journal_buckets() will return 0 to indicate no free journal bucket. Then journal_reclaim() will give up, and try next time to see whetheer there is free journal bucket to allocate. By this method, there is always 1 jouranl bucket reserved in run time. During the cache set registration, journal->do_reserve is 0 (false), so the reserved journal bucket can be used to avoid the no-space deadlock.Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix sleeping function called from invalid context on RT kernel When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel, these locks are replaced with sleepable rt-spinlock, so the stack calltrace will be triggered. Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start tp_printk=1" enabled. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0x8c dump_stack+0x10/0x12 __might_resched.cold+0x11d/0x155 rt_spin_lock+0x40/0x70 trace_event_buffer_commit+0x2fa/0x4c0 ? map_vsyscall+0x93/0x93 trace_event_raw_event_initcall_start+0xbe/0x110 ? perf_trace_initcall_finish+0x210/0x210 ? probe_sched_wakeup+0x34/0x40 ? ttwu_do_wakeup+0xda/0x310 ? trace_hardirqs_on+0x35/0x170 ? map_vsyscall+0x93/0x93 do_one_initcall+0x217/0x3c0 ? trace_event_raw_event_initcall_level+0x170/0x170 ? push_cpu_stop+0x400/0x400 ? cblist_init_generic+0x241/0x290 kernel_init_freeable+0x1ac/0x347 ? _raw_spin_unlock_irq+0x65/0x80 ? rest_init+0xf0/0xf0 kernel_init+0x1e/0x150 ret_from_fork+0x22/0x30 </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Don't hold the layoutget locks across multiple RPC calls When doing layoutget as part of the open() compound, we have to be careful to release the layout locks before we can call any further RPC calls, such as setattr(). The reason is that those calls could trigger a recall, which could deadlock.Show less