Improper Link Resolution Before File Access ('Link Following')

gitoxide gix-fs before 0.23.0 contains a path validation bypass vulnerability in the worktree checkout mechanism that allows attackers to escape the worktree directory via symlink manipulation. During forced checkout with overwrite_existing enabled, attackers can craft malicious repository trees where symlink entries replace validated directories, causing subsequent files to be written outside the worktree through the symlink for code execution or file manipulation.Show less

Improper Link Resolution Before File Access in the drag source staging path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to create files and directories at paths outside the staging directory, because subdir_data_for_drag() in kitty/dnd.c resolves a descendant of the staged item tree by constructing a path string and opening it with safe_open(path, O_DIRECTORY | O_RDONLY, 0) rather than by walking the tree one component at a time, so a client that declares two entries with the same name, the first a symlink whose target is an arbitrary absolute path and the second a directory, causes mkdirat() to fail with EEXIST, which the code ignores, and causes the subsequent path resolution to follow the symlink and return a directory descriptor outside the staging directory, which is then passed as the dirfd argument to add_payload() and used for every further create operation on that item and its descendants. Entry names are sanitised against path separators and dot components, but symlink targets are not validated. Files are created with O_CREAT | O_WRONLY | O_EXCL at mode 0644, so existing files cannot be overwritten, and directories are created with mkdirat() at mode 0755, so the attacker can create intermediate directories that did not previously exist. This results in the creation of files and directories at any path writable by the user running kitty, provided the symlink target is an existing directory.Show less

copyparty contains a volume restriction bypass vulnerability in its SFTP front end that allows authenticated SFTP users to create, remove, and truncate arbitrary paths outside permitted volume boundaries by exploiting three handlers that bypass the xvol volflag enforcement. The _mkdir, _rmdir, and _chattr handlers construct destination paths using vfs.get(), vn.canonical(), and os.path.join() without invoking the chk_ap access check, enabling attackers to traverse symlinks leaving a volume's top directory and perform unauthorized file creation, deletion, or truncation via SSH_FXP_SETSTAT operations on paths outside any volume the account is authorized to access.Show less

Improper link resolution before file access ('link following') vulnerability in the `tar` source plugin of Apache BuildStream running on Python < 3.12 allows malicious source tarballs to write files on the host, with the privileges of the user running BuildStream, via symlinks as part of source fetching. The impact of this issue is mitigated by: * BuildStream projects should only use trusted sources in their elements as otherwise the build output can also not be trusted * Tracking a source tarball pins its SHA256 hash, which prevents MITM attacks of users that are fetching an already tracked project * When running on Python >= 3.12, BuildStream >= 2.3.0 already makes use of the Python `tarfile` filter functionality, which blocks the symlink escape Users are recommended to upgrade to version 2.8.1, which fixes this issue.Show less

Ansible FreeBSD Jail Connection Plugin is an Ansible connection plugin for FreeBSD Jails via jexec. Through version 1.3.0, the jailexec connection plugin's put_file resolved a transfer's destination to a path on the jail host ( + ) and ran mkdir -p and mv there as root on the host. Those commands follow symbolic links, and the path was operated on outside the jail, so a symlink existing inside the jail was followed by the host-side, root-privileged mv. A party controlling content inside a managed jail (the jail's root, or any process able to create a symlink in a directory an Ansible task later writes to) can therefore cause an arbitrary root-owned write on the host, outside the jail — a full jail escape. Arbitrary root-owned host writes are readily escalated to host compromise (e.g. cron, rc.d, authorized_keys). Preconditions for this vulnerability are that the operator runs a copy/template/fetch-style task (anything using put_file) against the jail, and the attacker can place a symlink inside the jail at or above the task's destination before the transfer runs. This issue has been fixed in version 2.0.0.Show less

Improper link resolution before file access in the quarantine restoration process of WatchDog Anti-Virus 1.8.640 on Windows allows local, low-privileged attackers to cause a quarantined file to be written to an arbitrary filesystem location by creating a directory junction at the original file path and persuading an administrator to restore the file. This may enable modification of protected files or SYSTEM-level code execution through DLL hijacking.Show less

Grafana OSS and Grafana Enterprise did not safely resolve symbolic links when extracting plugin archives. A crafted plugin archive can chain relative symbolic link entries to escape the plugin installation directory, writing arbitrary files and an executable backend binary outside that directory. The dropped executable runs with the privileges of the Grafana server process, resulting in remote code execution. Plugin archives are extracted before their signature is verified, so a valid plugin signature does not prevent the write. An operator can therefore be affected by installing a plugin that appears legitimate, as well as by installing a plugin from an arbitrary archive using grafana-cli, the GF_INSTALL_PLUGINS environment variable, or preinstall configuration. Grafana Enterprise is affected because it includes the same plugin extraction code as Grafana OSS.Show less

mport is the MidnightBSD Package Manager. Prior to 2.7.8, directory assets handled as ASSET_DIR or ASSET_DIR_OWNER_MODE in libmport/bundle_read_install_pkg.c used path-based mport_mkdirp(), ownership, and permission operations. A local attacker able to modify part of the target installation tree could use dot-dot traversal or substitute symlinks during privileged package installation, causing directory creation or attribute changes to affect attacker-selected paths outside the intended package directories. This issue is fixed in version 2.7.8.Show less

mport is the MidnightBSD Package Manager. Prior to 2.7.8, do_actual_install() in libmport/bundle_read_install_pkg.c used path-based lstat(), chown(), stat(), and chmod() operations while installing package files. A local attacker with write access to a target directory could replace a checked file with a symlink before privileged ownership or mode changes were applied, redirecting those changes to an attacker-selected path and compromising filesystem integrity or permissions. This issue is fixed in version 2.7.8.Show less

pgAdmin 4's File Manager save_file endpoint, which backs saving from the Query Tool and ERD, validated the requested path with Filemanager.check_access_permission() and then opened the file for writing with a plain open() call. CVE-2026-7819 had previously hardened the separate file upload path by opening its target with O_NOFOLLOW, so that the kernel refuses to follow a symbolic link at the final path component, but save_file was left on an unprotected open(). A symbolic link already present when the check ran was rejected by the check itself; the remaining exposure was a link substituted at the final path component in the interval between the check and the write, at which point the write followed the link and landed outside the user's storage directory, creating or overwriting an arbitrary file as the operating-system account running pgAdmin. Exploitation requires the ability to create or replace a symbolic link inside the requesting user's storage directory. pgAdmin exposes no interface that creates symbolic links, so this requires filesystem access to the pgAdmin host or to a shared or network-mounted storage backend, together with winning the timing window. The reporter did not achieve a write against a released version, having attempted approximately 63,000 racing requests without success; the reported defect is the uncovered write path rather than a demonstrated sandbox escape. The fix routes save_file's write through the same O_NOFOLLOW-protected helper already used by the upload path, so both File Manager write sinks carry identical kernel-enforced protection, and reports a symbolic-link refusal explicitly instead of surfacing the underlying system error text. Note that files created by save_file are now given mode 0600, inheriting the behaviour introduced for uploads. The protection covers the final path component; substitution of an intermediate directory component is not addressed by this change. This issue affects pgAdmin 4: from the introduction of the containment check in the File Manager save path before 9.18.Show less

oras-go is a Go library for managing OCI artifacts. Prior to 2.6.2, content/file.Store extraction of OCI layers marked with io.deis.oras.content.unpack=true can write outside the store working directory. The pushDir path through extractTarDirectory and ensureLinkPath validates symlink targets lexically, resolveRelToBase skips its parent-symlink walk for root-level entries, and writeFile follows a terminal symlink when opening a regular file. A malicious archive can therefore create a symlink chain whose lexical target remains inside the extraction root but whose resolved target is an attacker-selected absolute path, then overwrite that target with a same-named regular-file entry even when AllowPathTraversalOnWrite is false. Pulling an attacker-controlled artifact can create or overwrite any file writable by the process and may lead to code execution. This issue is fixed in version 2.6.2.Show less

Dell Update Package Framework, versions prior to 26.07.03, contains an Improper Link Resolution Before File Access ('Link Following') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Filesystem access for attacker.Show less

Dell Update Package Framework, versions prior to 26.07.03, contains an Improper Link Resolution Before File Access ('Link Following') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Filesystem access for attacker.Show less

Composer is a dependency Manager for the PHP language. From 1.0 until 2.2.30 and from 2.3.0 until 2.10.3, a malicious or compromised dependency can bypass the earlier CVE-2026-59946 binary-path hardening because Composer validates literal parent-directory segments only during dependency resolution, while the symlink and installed-metadata paths described by the advisory skip that validation. A package can ship an in-package binary symlink that resolves outside its installation directory, or attacker-influenced vendor/composer/installed.json metadata can provide an escaping binary path during a reinstall or regeneration of missing vendor/bin entries. The installed-metadata path is reachable only when the vendor directory was not populated by the same validated install run, such as when it is restored from an untrusted cache, copied from an earlier build stage, carried over from an older Composer run, or writable by a lower-trust build step. Composer can follow the path, change the external target's permissions to make it world-readable and executable, and create a runnable vendor/bin proxy to that external file. The issue does not directly read or transmit data and does not by itself provide remote code execution. This issue is fixed in versions 2.2.30 and 2.10.3.Show less

A flaw was found in the containers/storage library. A crafted tar archive containing a malicious whiteout header (e.g. victim/.wh.) can cause the extraction destination directory to be replaced with an arbitrary file when processed by storage/pkg/archive.UnpackLayer, ApplyLayer, or ApplyUncompressedLayer.Show less

qbee transport is a remote access transport protocol implementation. Prior to 1.26.25, the extractTar routine uses strictly lexical path validation that does not account for on-disk symlinks created earlier in the extraction process. A crafted tar archive can use a symlink chain to write or overwrite files one directory level above the intended extraction path. When qbee-agent performs the extraction with root privileges, this permits a root-privileged file write outside the intended destination. This issue is fixed in version 1.26.25.Show less

On macOS, the virtio-fs host server used by Docker Sandboxes improperly follows symlinks when reopening an unlinked file from a stored path. A malicious guest can replace a parent directory with a symlink, escape the shared workspace, and read or modify arbitrary host files as the VMM user, potentially achieving host code execution.Show less

MikroTik RouterOS before 7.24.2 contains a path traversal vulnerability in the container package OCI/tar image extraction that allows attackers to write files outside the container root by supplying a crafted container image with symlinks pointing to arbitrary paths. Attackers can exploit unsanitized tar member path extraction during container import via /container/add to achieve root-privileged file creation, directory creation, file deletion via overlayfs whiteout, and hardlink creation on the persistent data partition without ever starting the container. The 7.23.x long-term branch does not contain this fix; the container binaries in container-7.23.3.npk and container-7.23.4.npk are byte-identical. The vendor has confirmed that the issue is not resolved in the long-term release and that the fix is carried forward only in the stable branch from 7.24.2 onward, with no backport to the long-term branch planned.Show less