Active Debug Code

There is a possible escalation of privilege due to test/debugging code left in a production build. This could lead to physical escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Show less

: Active Debug Code vulnerability in ABB Switch Actuator 4 DU-83330, ABB Switch actuator, door/light 4 DU -83330-500.This issue affects Switch Actuator 4 DU-83330: All Versions; Switch actuator, door/light 4 DU -83330-500: All Versions.Show less

A vulnerability was found in Netis WF-2404 1.1.124EN. It has been declared as critical. This vulnerability affects unknown code of the component UART. The manipulation leads to hardware allows activation of test or debug logic at runtime. It is possible to launch the attack on the physical device. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.Show less

A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.90), SIPROTEC 5 6MD85 (CP200) (All versions), SIPROTEC 5 6MD85 (CP300) (All versions < V9.90), SIPROTEC 5 6MD86 (CP200) (All versions), SIPROTEC 5 6MD86 (CP300) (All versions < V9.90), SIPROTEC 5 6MD89 (CP300) (All versions < V9.90), SIPROTEC 5 6MU85 (CP300) (All versions < V9.90), SIPROTEC 5 7KE85 (CP200) (All versions), SIPROTEC 5 7KE85 (CP300) (All versions < V10.0), SIPROTEC 5 7SA82 (CP100) (All versions < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.90), SIPROTEC 5 7SA86 (CP200) (All versions), SIPROTEC 5 7SA86 (CP300) (All versions < V9.90), SIPROTEC 5 7SA87 (CP200) (All versions), SIPROTEC 5 7SA87 (CP300) (All versions < V9.90), SIPROTEC 5 7SD82 (CP100) (All versions < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.90), SIPROTEC 5 7SD86 (CP200) (All versions), SIPROTEC 5 7SD86 (CP300) (All versions < V9.90), SIPROTEC 5 7SD87 (CP200) (All versions), SIPROTEC 5 7SD87 (CP300) (All versions < V9.90), SIPROTEC 5 7SJ81 (CP100) (All versions < V8.90), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.90), SIPROTEC 5 7SJ82 (CP100) (All versions < V8.90), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.90), SIPROTEC 5 7SJ85 (CP200) (All versions), SIPROTEC 5 7SJ85 (CP300) (All versions < V9.90), SIPROTEC 5 7SJ86 (CP200) (All versions), SIPROTEC 5 7SJ86 (CP300) (All versions < V9.90), SIPROTEC 5 7SK82 (CP100) (All versions < V8.90), SIPROTEC 5 7SK82 (CP150) (All versions < V9.90), SIPROTEC 5 7SK85 (CP200) (All versions), SIPROTEC 5 7SK85 (CP300) (All versions < V9.90), SIPROTEC 5 7SL82 (CP100) (All versions < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.90), SIPROTEC 5 7SL86 (CP200) (All versions), SIPROTEC 5 7SL86 (CP300) (All versions < V9.90), SIPROTEC 5 7SL87 (CP200) (All versions), SIPROTEC 5 7SL87 (CP300) (All versions < V9.90), SIPROTEC 5 7SS85 (CP200) (All versions), SIPROTEC 5 7SS85 (CP300) (All versions < V9.90), SIPROTEC 5 7ST85 (CP200) (All versions), SIPROTEC 5 7ST85 (CP300) (All versions < V10.0), SIPROTEC 5 7ST86 (CP300) (All versions < V10.0), SIPROTEC 5 7SX82 (CP150) (All versions < V9.90), SIPROTEC 5 7SX85 (CP300) (All versions < V9.90), SIPROTEC 5 7SY82 (CP150) (All versions < V9.90), SIPROTEC 5 7UM85 (CP300) (All versions < V9.90), SIPROTEC 5 7UT82 (CP100) (All versions < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.90), SIPROTEC 5 7UT85 (CP200) (All versions), SIPROTEC 5 7UT85 (CP300) (All versions < V9.90), SIPROTEC 5 7UT86 (CP200) (All versions), SIPROTEC 5 7UT86 (CP300) (All versions < V9.90), SIPROTEC 5 7UT87 (CP200) (All versions), SIPROTEC 5 7UT87 (CP300) (All versions < V9.90), SIPROTEC 5 7VE85 (CP300) (All versions < V9.90), SIPROTEC 5 7VK87 (CP200) (All versions), SIPROTEC 5 7VK87 (CP300) (All versions < V9.90), SIPROTEC 5 7VU85 (CP300) (All versions < V9.90), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.90). Affected devices do not properly limit access to a development shell accessible over a physical interface. This could allow an unauthenticated attacker with physical access to the device to execute arbitrary commands on the device.Show less

The Four-Faith F3x36 router using firmware v2.0.0 is vulnerable to an authentication bypass vulnerability in the administrative web server. Authentication is not enforced on some administrative functionality when using the "bapply.cgi" endpoint instead of the normal "apply.cgi" endpoint. A remote and unauthenticated can use this vulnerability to modify settings or chain with existing authenticated vulnerabilities.Show less

The Four-Faith F3x36 router using firmware v2.0.0 is vulnerable to authentication bypass due to hard-coded credentials in the administrative web server. An attacker with knowledge of the credentials can gain administrative access via crafted HTTP requests. This issue appears similar to CVE-2023-32645.Show less

A vulnerability in Cisco&nbsp;RCM for Cisco&nbsp;StarOS Software could allow an unauthenticated, remote attacker to perform remote code execution on the application with root-level privileges&nbsp;in the context of the configured container. This vulnerability exists because the debug mode is incorrectly enabled for specific services. An attacker could exploit this vulnerability by connecting to the device and navigating to the service with debug mode enabled. A successful exploit could allow the attacker to execute arbitrary commands as the root user. The attacker would need to perform detailed reconnaissance to allow for unauthenticated access. The vulnerability can also be exploited by an authenticated attacker. Cisco&nbsp;has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.Show less

Active debug code vulnerability exists in Mesh Wi-Fi router RP562B firmware version v1.0.2 and earlier. If this vulnerability is exploited, a network-adjacent authenticated attacker may obtain or alter the settings of the device .Show less

Smart-tab Android app installed April 2023 or earlier contains an active debug code vulnerability. If this vulnerability is exploited, an attacker with physical access to the device may exploit the debug function to gain access to the OS functions, escalate the privilege, change the device's settings, or spoof devices in other rooms.Show less

There is a possible LCS signing enforcement missing due to test/debugging code left in a production build. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Show less

FutureNet NXR series, VXR series and WXR series provided by Century Systems Co., Ltd. contain an active debug code vulnerability. If a user who knows how to use the debug function logs in to the product, the debug function may be used and an arbitrary OS command may be executed.Show less

Artifex Ghostscript before 10.03.1, when Tesseract is used for OCR, has a directory traversal issue that allows arbitrary file reading (and writing of error messages to arbitrary files) via OCRLanguage. For example, exploitation can use debug_file /tmp/out and user_patterns_file /etc/passwd.Show less

A leftover debug code vulnerability exists in the cli_server debug functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.4.1 Build 20240117 Rel.57421. A specially crafted series of network requests can lead to arbitrary command execution. An attacker can send a sequence of requests to trigger this vulnerability.Show less

A leftover debug code vulnerability exists in the Telnet Diagnostic Interface functionality of AutomationDirect P3-550E 1.2.10.9. A specially crafted series of network requests can lead to unauthorized access. An attacker can send a sequence of requests to trigger this vulnerability.Show less