NULL Pointer Dereference

In the Linux kernel, the following vulnerability has been resolved: md: fix a crash in mempool_free There's a crash in mempool_free when running the lvm test shell/lvchange-rebuild-raid.sh. The reason for the crash is this: * super_written calls atomic_dec_and_test(&mddev->pending_writes) and wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev) and bio_put(bio). * so, the process that waited on sb_wait and that is woken up is racing with bio_put(bio). * if the process wins the race, it calls bioset_exit before bio_put(bio) is executed. * bio_put(bio) attempts to free a bio into a destroyed bio set - causing a crash in mempool_free. We fix this bug by moving bio_put before atomic_dec_and_test. We also move rdev_dec_pending before atomic_dec_and_test as suggested by Neil Brown. The function md_end_flush has a similar bug - we must call bio_put before we decrement the number of in-progress bios. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 11557f0067 P4D 11557f0067 PUD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: kdelayd flush_expired_bios [dm_delay] RIP: 0010:mempool_free+0x47/0x80 Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00 RSP: 0018:ffff88910036bda8 EFLAGS: 00010093 RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8 RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900 R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000 R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05 FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0 Call Trace: <TASK> clone_endio+0xf4/0x1c0 [dm_mod] clone_endio+0xf4/0x1c0 [dm_mod] __submit_bio+0x76/0x120 submit_bio_noacct_nocheck+0xb6/0x2a0 flush_expired_bios+0x28/0x2f [dm_delay] process_one_work+0x1b4/0x300 worker_thread+0x45/0x3e0 ? rescuer_thread+0x380/0x380 kthread+0xc2/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---Show less

In the Linux kernel, the following vulnerability has been resolved: mm: /proc/pid/smaps_rollup: fix no vma's null-deref Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") introduced a null-deref if there are no vma's in the task in show_smaps_rollup.Show less

Dragonfly is an open source P2P-based file distribution and image acceleration system. Prior to 2.1.0, the first return value of a function is dereferenced even when the function returns an error. This can result in a nil dereference, and cause code to panic. This vulnerability is fixed in 2.1.0.Show less

In the Linux kernel, the following vulnerability has been resolved: block: be a bit more careful in checking for NULL bdev while polling Wei reports a crash with an application using polled IO: PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1 Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022 RIP: 0010:bio_poll+0x25/0x200 Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65 RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600 RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140 RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00 R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001 FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: iocb_bio_iopoll+0x1d/0x30 io_do_iopoll+0xac/0x250 __se_sys_io_uring_enter+0x3c5/0x5a0 ? __x64_sys_write+0x89/0xd0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x94f225d Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7 RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 which is due to bio->bi_bdev being NULL. This can happen if we have two tasks doing polled IO, and task B ends up completing IO from task A if they are sharing a poll queue. If task B completes the IO and puts the bio into our cache, then it can allocate that bio again before task A is done polling for it. As that would necessitate a preempt between the two tasks, it's enough to just be a bit more careful in checking for whether or not bio->bi_bdev is NULL.Show less

In the Linux kernel, the following vulnerability has been resolved: regulator: da9063: better fix null deref with partial DT Two versions of the original patch were sent but V1 was merged instead of V2 due to a mistake. So update to V2. The advantage of V2 is that it completely avoids dereferencing the pointer, even just to take the address, which may fix problems with some compilers. Both versions work on my gcc 9.4 but use the safer one.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Add null pointer check in gserial_suspend Consider a case where gserial_disconnect has already cleared gser->ioport. And if gserial_suspend gets called afterwards, it will lead to accessing of gser->ioport and thus causing null pointer dereference. Avoid this by adding a null pointer check. Added a static spinlock to prevent gser->ioport from becoming null after the newly added null pointer check.Show less

In the Linux kernel, the following vulnerability has been resolved: skbuff: skb_segment, Call zero copy functions before using skbuff frags Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: check null pointer before accessing when swapping Add a check to avoid null pointer dereference as below: [ 90.002283] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 90.002292] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.002346] ? exc_general_protection+0x159/0x240 [ 90.002352] ? asm_exc_general_protection+0x26/0x30 [ 90.002357] ? ttm_bo_evict_swapout_allowable+0x322/0x5e0 [ttm] [ 90.002365] ? ttm_bo_evict_swapout_allowable+0x42e/0x5e0 [ttm] [ 90.002373] ttm_bo_swapout+0x134/0x7f0 [ttm] [ 90.002383] ? __pfx_ttm_bo_swapout+0x10/0x10 [ttm] [ 90.002391] ? lock_acquire+0x44d/0x4f0 [ 90.002398] ? ttm_device_swapout+0xa5/0x260 [ttm] [ 90.002412] ? lock_acquired+0x355/0xa00 [ 90.002416] ? do_raw_spin_trylock+0xb6/0x190 [ 90.002421] ? __pfx_lock_acquired+0x10/0x10 [ 90.002426] ? ttm_global_swapout+0x25/0x210 [ttm] [ 90.002442] ttm_device_swapout+0x198/0x260 [ttm] [ 90.002456] ? __pfx_ttm_device_swapout+0x10/0x10 [ttm] [ 90.002472] ttm_global_swapout+0x75/0x210 [ttm] [ 90.002486] ttm_tt_populate+0x187/0x3f0 [ttm] [ 90.002501] ttm_bo_handle_move_mem+0x437/0x590 [ttm] [ 90.002517] ttm_bo_validate+0x275/0x430 [ttm] [ 90.002530] ? __pfx_ttm_bo_validate+0x10/0x10 [ttm] [ 90.002544] ? kasan_save_stack+0x33/0x60 [ 90.002550] ? kasan_set_track+0x25/0x30 [ 90.002554] ? __kasan_kmalloc+0x8f/0xa0 [ 90.002558] ? amdgpu_gtt_mgr_new+0x81/0x420 [amdgpu] [ 90.003023] ? ttm_resource_alloc+0xf6/0x220 [ttm] [ 90.003038] amdgpu_bo_pin_restricted+0x2dd/0x8b0 [amdgpu] [ 90.003210] ? __x64_sys_ioctl+0x131/0x1a0 [ 90.003210] ? do_syscall_64+0x60/0x90Show less

In the Linux kernel, the following vulnerability has been resolved: icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev(). With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that has the link-local address as src and dst IP and will be forwarded to an external IP in the IPv6 Ext Hdr. For example, the script below generates a packet whose src IP is the link-local address and dst is updated to 11::. # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done # python3 >>> from socket import * >>> from scapy.all import * >>> >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456" >>> >>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR) >>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1) >>> >>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW) >>> sk.sendto(bytes(pkt), (DST_ADDR, 0)) For such a packet, we call ip6_route_input() to look up a route for the next destination in these three functions depending on the header type. * ipv6_rthdr_rcv() * ipv6_rpl_srh_rcv() * ipv6_srh_rcv() If no route is found, ip6_null_entry is set to skb, and the following dst_input(skb) calls ip6_pkt_drop(). Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev as the input device is the loopback interface. Then, we have to check if skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref for ip6_null_entry. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ip6_pkt_drop (net/ipv6/route.c:4513) ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5455) process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895) __napi_poll (net/core/dev.c:6460) net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4231) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:725 net/socket.c:748) __sys_sendto (net/socket.c:2134) __x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f9dc751baea Code: d8 64 89 02 48 c7 c0 ff f ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: media: ipu-bridge: Fix null pointer deref on SSDB/PLD parsing warnings When ipu_bridge_parse_rotation() and ipu_bridge_parse_orientation() run sensor->adev is not set yet. So if either of the dev_warn() calls about unknown values are hit this will lead to a NULL pointer deref. Set sensor->adev earlier, with a borrowed ref to avoid making unrolling on errors harder, to fix this.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() If get_ep_from_tid() fails to lookup non-NULL value for ep, ep is dereferenced later regardless of whether it is empty. This patch adds a simple sanity check to fix the issue. Found by Linux Verification Center (linuxtesting.org) with SVACE.Show less

In the Linux kernel, the following vulnerability has been resolved: i2c: designware: Fix handling of real but unexpected device interrupts Commit c7b79a752871 ("mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs") caused a regression on certain Gigabyte motherboards for Intel Alder Lake-S where system crashes to NULL pointer dereference in i2c_dw_xfer_msg() when system resumes from S3 sleep state ("deep"). I was able to debug the issue on Gigabyte Z690 AORUS ELITE and made following notes: - Issue happens when resuming from S3 but not when resuming from "s2idle" - PCI device 00:15.0 == i2c_designware.0 is already in D0 state when system enters into pci_pm_resume_noirq() while all other i2c_designware PCI devices are in D3. Devices were runtime suspended and in D3 prior entering into suspend - Interrupt comes after pci_pm_resume_noirq() when device interrupts are re-enabled - According to register dump the interrupt really comes from the i2c_designware.0. Controller is enabled, I2C target address register points to a one detectable I2C device address 0x60 and the DW_IC_RAW_INTR_STAT register START_DET, STOP_DET, ACTIVITY and TX_EMPTY bits are set indicating completed I2C transaction. My guess is that the firmware uses this controller to communicate with an on-board I2C device during resume but does not disable the controller before giving control to an operating system. I was told the UEFI update fixes this but never the less it revealed the driver is not ready to handle TX_EMPTY (or RX_FULL) interrupt when device is supposed to be idle and state variables are not set (especially the dev->msgs pointer which may point to NULL or stale old data). Introduce a new software status flag STATUS_ACTIVE indicating when the controller is active in driver point of view. Now treat all interrupts that occur when is not set as unexpected and mask all interrupts from the controller.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix null-ptr-deref in vkms_release() A null-ptr-deref is triggered when it tries to destroy the workqueue in vkms->output.composer_workq in vkms_release(). KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24 RIP: 0010:destroy_workqueue+0x2f/0x710 ... Call Trace: <TASK> ? vkms_config_debugfs_init+0x50/0x50 [vkms] __devm_drm_dev_alloc+0x15a/0x1c0 [drm] vkms_init+0x245/0x1000 [vkms] do_one_initcall+0xd0/0x4f0 do_init_module+0x1a4/0x680 load_module+0x6249/0x7110 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that an OOM happened which triggers the destroy of the workqueue, however, the workqueue is alloced in the later process, thus a null-ptr-deref happened. A simple call graph is shown as below: vkms_init() vkms_create() devm_drm_dev_alloc() __devm_drm_dev_alloc() devm_drm_dev_init() devm_add_action_or_reset() devm_add_action() # an error happened devm_drm_dev_init_release() drm_dev_put() kref_put() drm_dev_release() vkms_release() destroy_workqueue() # null-ptr-deref happened vkms_modeset_init() vkms_output_init() vkms_crtc_init() # where the workqueue get allocated Fix this by checking if composer_workq is NULL before passing it to the destroy_workqueue() in vkms_release().Show less

In the Linux kernel, the following vulnerability has been resolved: i2c: mux: reg: check return value after calling platform_get_resource() It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Fault injection test reports this issue: kernel BUG at net/core/dev.c:10731! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Call Trace: <TASK> wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff] spi_probe+0xe4/0x140 really_probe+0x17e/0x3f0 __driver_probe_device+0xe3/0x170 driver_probe_device+0x49/0x120 The root case here is alloc_ordered_workqueue() fails, but cfg80211_unregister_netdevice() or unregister_netdev() not be called in error handling path. To fix add unregister_netdev goto lable to add the unregister operation in error handling path.Show less

In the Linux kernel, the following vulnerability has been resolved: media: cx88: Fix a null-ptr-deref bug in buffer_prepare() When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue(). The following log can reveal it: [ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI [ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500 [ 41.836311] Call Trace: [ 41.836945] __enqueue_in_driver+0x141/0x360 [ 41.837262] vb2_start_streaming+0x62/0x4a0 [ 41.838216] vb2_core_streamon+0x1da/0x2c0 [ 41.838516] __vb2_init_fileio+0x981/0xbc0 [ 41.839141] __vb2_perform_fileio+0xbf9/0x1120 [ 41.840072] vb2_fop_read+0x20e/0x400 [ 41.840346] v4l2_read+0x215/0x290 [ 41.840603] vfs_read+0x162/0x4c0 Fix this by checking the return value of cx88_risc_buffer() [hverkuil: fix coding style issues]Show less

In the Linux kernel, the following vulnerability has been resolved: net: sched: sfb: fix null pointer access issue when sfb_init() fails When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd_process_device_init_vm error handling Should only destroy the ib_mem and let process cleanup worker to free the outstanding BOs. Reset the pointer in pdd->qpd structure, to avoid NULL pointer access in process destroy worker. BUG: kernel NULL pointer dereference, address: 0000000000000010 Call Trace: amdgpu_amdkfd_gpuvm_unmap_gtt_bo_from_kernel+0x46/0xb0 [amdgpu] kfd_process_device_destroy_cwsr_dgpu+0x40/0x70 [amdgpu] kfd_process_destroy_pdds+0x71/0x190 [amdgpu] kfd_process_wq_release+0x2a2/0x3b0 [amdgpu] process_one_work+0x2a1/0x600 worker_thread+0x39/0x3d0Show less

In the Linux kernel, the following vulnerability has been resolved: mmc: wmt-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, clk_disable_unprepare() also needs be called.Show less

Open5GS v2.7.5, prior to commit 67ba7f92bbd7a378954895d96d9d7b05d5b64615, is vulnerable to a NULL pointer dereference when a multipart/related HTTP POST request with an empty HTTP body is sent to the SBI of either AMF, AUSF, BSF, NRF, NSSF, PCF, SMF, UDM, or UDR, resulting in a denial of service. This occurs in the parse_multipart function in lib/sbi/message.c.Show less