NULL Pointer Dereference

HarfBuzz::Shaper versions before 0.032 for Perl contains a bundled library with a null pointer dereference vulnerability.  Versions before 0.032 contain HarfBuzz 8.4.0 or earlier bundled as hb_src.tar.gz in the source tarball, which is affected by CVE-2026-22693.Show less

A security flaw has been discovered in nicbarker clay up to 0.14. This affects the function Clay__MeasureTextCached in the library clay.h. The manipulation results in null pointer dereference. The attack is only possible with local access. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.Show less

A NULL Pointer Dereference vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS on MX, SRX and EX Series allows a local attacker with low privileges to cause a Denial-of-Service (DoS). When a user executes the 'show chassis' command with specifically crafted options, chassisd will crash and restart. Due to this all components but the Routing Engine (RE) in the chassis are reinitialized, which leads to a complete service outage, which the system automatically recovers from. This issue affects: Junos OS on MX, SRX and EX Series, except MX10000 Series and MX304:  * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2.Show less

A Null Pointer Dereference vulnerability exists in the referer header check of the web portal of TP-Link TL-WR841N v14, caused by improper input validation.  A remote, unauthenticated attacker can exploit this flaw and cause Denial of Service on the web portal service.This issue affects TL-WR841N v14: before 250908.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add missing NULL pointer check for pingpong interface It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a single place the check is missing. Also use convenient locals instead of phys_enc->* where available. Patchwork: https://patchwork.freedesktop.org/patch/693860/Show less

In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt() The variable mddev->private is first assigned to conf and then checked: conf = mddev->private; if (!conf) ... If conf is NULL, then mddev->private is also NULL. In this case, null-pointer dereferences can occur when calling raid5_quiesce(): raid5_quiesce(mddev, true); raid5_quiesce(mddev, false); since mddev->private is assigned to conf again in raid5_quiesce(), and conf is dereferenced in several places, for example: conf->quiesce = 0; wake_up(&conf->wait_for_quiescent); To fix this issue, the function should unlock mddev and return before invoking raid5_quiesce() when conf is NULL, following the existing pattern in raid5_change_consistency_policy().Show less

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Zero-initialize the eb.vma array in i915_gem_do_execbuffer Initialize the eb.vma array with values of 0 when the eb structure is first set up. In particular, this sets the eb->vma[i].vma pointers to NULL, simplifying cleanup and getting rid of the bug described below. During the execution of eb_lookup_vmas(), the eb->vma array is successively filled up with struct eb_vma objects. This process includes calling eb_add_vma(), which might fail; however, even in the event of failure, eb->vma[i].vma is set for the currently processed buffer. If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which prompts a call to eb_release_vmas() to clean up the mess. Since eb_lookup_vmas() might fail during processing any (possibly not first) buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know at what point did the lookup function fail. In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is set to NULL in case i915_gem_object_userptr_submit_init() fails; the current one needs to be cleaned up by eb_release_vmas() at this point, so the next one is set. If eb_add_vma() fails, neither the current nor the next vma is set to NULL, which is a source of a NULL deref bug described in the issue linked in the Closes tag. When entering eb_lookup_vmas(), the vma pointers are set to the slab poison value, instead of NULL. This doesn't matter for the actual lookup, since it gets overwritten anyway, however the eb_release_vmas() function only recognizes NULL as the stopping value, hence the pointers are being set to NULL as they go in case of intermediate failure. This patch changes the approach to filling them all with NULL at the start instead, rather than handling that manually during failure. (cherry picked from commit 08889b706d4f0b8d2352b7ca29c2d8df4d0787cd)Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Do not register unsupported perf events Synthetic events currently do not have a function to register perf events. This leads to calling the tracepoint register functions with a NULL function pointer which triggers: ------------[ cut here ]------------ WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:tracepoint_add_func+0x357/0x370 Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000 RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8 RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780 R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78 FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0 Call Trace: <TASK> tracepoint_probe_register+0x5d/0x90 synth_event_reg+0x3c/0x60 perf_trace_event_init+0x204/0x340 perf_trace_init+0x85/0xd0 perf_tp_event_init+0x2e/0x50 perf_try_init_event+0x6f/0x230 ? perf_event_alloc+0x4bb/0xdc0 perf_event_alloc+0x65a/0xdc0 __se_sys_perf_event_open+0x290/0x9f0 do_syscall_64+0x93/0x7b0 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? trace_hardirqs_off+0x53/0xc0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Instead, have the code return -ENODEV, which doesn't warn and has perf error out with: # perf record -e synthetic:futex_wait Error: The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait). "dmesg | grep -i perf" may provide additional information. Ideally perf should support synthetic events, but for now just fix the warning. The support can come later.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: move preempt_prepare_postamble after error check Move the call to preempt_prepare_postamble() after verifying that preempt_postamble_ptr is valid. If preempt_postamble_ptr is NULL, dereferencing it in preempt_prepare_postamble() would lead to a crash. This change avoids calling the preparation function when the postamble allocation has failed, preventing potential NULL pointer dereference and ensuring proper error handling. Patchwork: https://patchwork.freedesktop.org/patch/687659/Show less

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf A zero length gss_token results in pages == 0 and in_token->pages[0] is NULL. The code unconditionally evaluates page_address(in_token->pages[0]) for the initial memcpy, which can dereference NULL even when the copy length is 0. Guard the first memcpy so it only runs when length > 0.Show less

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid walking the Namespace if start_node is NULL Although commit 0c9992315e73 ("ACPICA: Avoid walking the ACPI Namespace if it is not there") fixed the situation when both start_node and acpi_gbl_root_node are NULL, the Linux kernel mainline now still crashed on Honor Magicbook 14 Pro [1]. That happens due to the access to the member of parent_node in acpi_ns_get_next_node(). The NULL pointer dereference will always happen, no matter whether or not the start_node is equal to ACPI_ROOT_OBJECT, so move the check of start_node being NULL out of the if block. Unfortunately, all the attempts to contact Honor have failed, they refused to provide any technical support for Linux. The bad DSDT table's dump could be found on GitHub [2]. DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025 [ rjw: Subject adjustment, changelog edits ]Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: ensure node page reads complete before f2fs_put_super() finishes Xfstests generic/335, generic/336 sometimes crash with the following message: F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1 ------------[ cut here ]------------ kernel BUG at fs/f2fs/super.c:1939! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none) Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_put_super+0x3b3/0x3c0 Call Trace: <TASK> generic_shutdown_super+0x7e/0x190 kill_block_super+0x1a/0x40 kill_f2fs_super+0x9d/0x190 deactivate_locked_super+0x30/0xb0 cleanup_mnt+0xba/0x150 task_work_run+0x5c/0xa0 exit_to_user_mode_loop+0xb7/0xc0 do_syscall_64+0x1ae/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- It appears that sometimes it is possible that f2fs_put_super() is called before all node page reads are completed. Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm: adreno: fix deferencing ifpc_reglist when not declared On plaforms with an a7xx GPU not supporting IFPC, the ifpc_reglist if still deferenced in a7xx_patch_pwrup_reglist() which causes a kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : a6xx_hw_init+0x155c/0x1e4c [msm] lr : a6xx_hw_init+0x9a8/0x1e4c [msm] ... Call trace: a6xx_hw_init+0x155c/0x1e4c [msm] (P) msm_gpu_hw_init+0x58/0x88 [msm] adreno_load_gpu+0x94/0x1fc [msm] msm_open+0xe4/0xf4 [msm] drm_file_alloc+0x1a0/0x2e4 [drm] drm_client_init+0x7c/0x104 [drm] drm_fbdev_client_setup+0x94/0xcf0 [drm_client_lib] drm_client_setup+0xb4/0xd8 [drm_client_lib] msm_drm_kms_post_init+0x2c/0x3c [msm] msm_drm_init+0x1a4/0x228 [msm] msm_drm_bind+0x30/0x3c [msm] ... Check the validity of ifpc_reglist before deferencing the table to setup the register values. Patchwork: https://patchwork.freedesktop.org/patch/688944/Show less

Substance3D - Modeler versions 1.22.4 and earlier are affected by a NULL Pointer Dereference vulnerability that could lead to application denial-of-service. Exploitation of this issue requires user interaction in that a victim must open a malicious file.Show less

Substance3D - Modeler versions 1.22.4 and earlier are affected by a NULL Pointer Dereference vulnerability that could lead to application denial-of-service. Exploitation of this issue requires user interaction in that a victim must open a malicious file.Show less

Illustrator versions 29.8.3, 30.0 and earlier are affected by a NULL Pointer Dereference vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to crash the application, causing disruption to services. Exploitation of this issue requires user interaction in that a victim must open a malicious file.Show less

In the Linux kernel, the following vulnerability has been resolved: ip6_gre: make ip6gre_header() robust Over the years, syzbot found many ways to crash the kernel in ip6gre_header() [1]. This involves team or bonding drivers ability to dynamically change their dev->needed_headroom and/or dev->hard_header_len In this particular crash mld_newpack() allocated an skb with a too small reserve/headroom, and by the time mld_sendpack() was called, syzbot managed to attach an ip6gre device. [1] skbuff: skb_under_panic: text:ffffffff8a1d69a8 len:136 put:40 head:ffff888059bc7000 data:ffff888059bc6fe8 tail:0x70 end:0x6c0 dev:team0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:213 ! <TASK> skb_under_panic net/core/skbuff.c:223 [inline] skb_push+0xc3/0xe0 net/core/skbuff.c:2641 ip6gre_header+0xc8/0x790 net/ipv6/ip6_gre.c:1371 dev_hard_header include/linux/netdevice.h:3436 [inline] neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618 neigh_output include/net/neighbour.h:556 [inline] ip6_finish_output2+0xfb3/0x1480 net/ipv6/ip6_output.c:136 __ip6_finish_output net/ipv6/ip6_output.c:-1 [inline] ip6_finish_output+0x234/0x7d0 net/ipv6/ip6_output.c:220 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247 NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318 mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693Show less

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Avoid NULL pointer deref for evicted BOs It is possible for a BO to exist that is not currently associated with a resource, e.g. because it has been evicted. When devcoredump tries to read the contents of all BOs for dumping, we need to expect this as well -- in this case, ENODATA is recorded instead of the buffer contents.Show less