NULL Pointer Dereference

In the Linux kernel, the following vulnerability has been resolved: powerpc/mm: Fix null-pointer dereference in pgtable_cache_add kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap() Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()' should check the return value before examining skb data. So convert the latter to return an appropriate error code and propagate it to return from 'wfx_start_ap()' as well. Compile tested only.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix possible NULL dereference in amdgpu_ras_query_error_status_helper() Return invalid error code -EINVAL for invalid block id. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176)Show less

Verifying a certificate chain which contains a certificate with an unknown public key algorithm will cause Certificate.Verify to panic. This affects all crypto/tls clients, and servers that set Config.ClientAuth to VerifyClientCertIfGiven or RequireAndVerifyClientCert. The default behavior is for TLS servers to not verify client certificates.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf In commit 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only") a check for CEA modes was added to function mtk_hdmi_bridge_mode_valid() in order to address possible issues on MT8167; moreover, with commit c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock") another similar check was introduced. Unfortunately though, at the time of writing, MT8173 does not provide any mtk_hdmi_conf structure and this is crashing the kernel with NULL pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as soon as a HDMI cable gets plugged in. To fix this regression, add a NULL pointer check for hdmi->conf in the said function, restoring HDMI functionality and avoiding NULL pointer kernel panics.Show less

In the Linux kernel, the following vulnerability has been resolved: ipmi: ssif: initialize ssif_info->client early During probe ssif_info->client is dereferenced in error path. However, it is set when some of the error checking has already been done. This causes following kernel crash if an error path is taken: [ 30.645593][ T674] ipmi_ssif 0-000e: ipmi_ssif: Not probing, Interface already present [ 30.657616][ T674] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 ... [ 30.657723][ T674] pc : __dev_printk+0x28/0xa0 [ 30.657732][ T674] lr : _dev_err+0x7c/0xa0 ... [ 30.657772][ T674] Call trace: [ 30.657775][ T674] __dev_printk+0x28/0xa0 [ 30.657778][ T674] _dev_err+0x7c/0xa0 [ 30.657781][ T674] ssif_probe+0x548/0x900 [ipmi_ssif 62ce4b08badc1458fd896206d9ef69a3c31f3d3e] [ 30.657791][ T674] i2c_device_probe+0x37c/0x3c0 ... Initialize ssif_info->client before any error path can be taken. Clear i2c_client data in the error path to prevent the dangling pointer from leaking.Show less

In the Linux kernel, the following vulnerability has been resolved: team: fix null-ptr-deref when team device type is changed Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug.Show less

In the Linux kernel, the following vulnerability has been resolved: net: rds: Fix possible NULL-pointer dereference In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists before dereferencing it as rdma_set_service_type() argument Found by Linux Verification Center (linuxtesting.org) with SVACE.Show less

In the Linux kernel, the following vulnerability has been resolved: vfio/mdev: Fix a null-ptr-deref bug for mdev_unregister_parent() Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in kobject_add_internal() in kobject_init_and_add() in mdev_type_add() in parent_create_sysfs_files(), it will return 0 and probe successfully. And when rmmod mdpy.ko, the mdpy_dev_exit() will call mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized parent->types[i] in parent_remove_sysfs_files(), and it will cause below null-ptr-deref. If mdev_type_add() fails, return the error code and kset_unregister() to fix the issue. general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? __kobject_del+0x62/0x1c0 kobject_del+0x32/0x50 parent_remove_sysfs_files+0xd6/0x170 [mdev] mdev_unregister_parent+0xfb/0x190 [mdev] ? mdev_register_parent+0x270/0x270 [mdev] ? find_module_all+0x9d/0xe0 mdpy_dev_exit+0x17/0x63 [mdpy] __do_sys_delete_module.constprop.0+0x2fa/0x4b0 ? module_flags+0x300/0x300 ? __fput+0x4e7/0xa00 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fbc813221b7 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0 </TASK> Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(000 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an enclave and set secs.epc_page to NULL. The SECS page is used for EAUG and ELDU in the SGX page fault handler. However, the NULL check for secs.epc_page is only done for ELDU, not EAUG before being used. Fix this by doing the same NULL check and reloading of the SECS page as needed for both EAUG and ELDU. The SECS page holds global enclave metadata. It can only be reclaimed when there are no other enclave pages remaining. At that point, virtually nothing can be done with the enclave until the SECS page is paged back in. An enclave can not run nor generate page faults without a resident SECS page. But it is still possible for a #PF for a non-SECS page to race with paging out the SECS page: when the last resident non-SECS page A triggers a #PF in a non-resident page B, and then page A and the SECS both are paged out before the #PF on B is handled. Hitting this bug requires that race triggered with a #PF for EAUG. Following is a trace when it happens. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:sgx_encl_eaug_page+0xc7/0x210 Call Trace: ? __kmem_cache_alloc_node+0x16a/0x440 ? xa_load+0x6e/0xa0 sgx_vma_fault+0x119/0x230 __do_fault+0x36/0x140 do_fault+0x12f/0x400 __handle_mm_fault+0x728/0x1110 handle_mm_fault+0x105/0x310 do_user_addr_fault+0x1ee/0x750 ? __this_cpu_preempt_check+0x13/0x20 exc_page_fault+0x76/0x180 asm_exc_page_fault+0x27/0x30Show less

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: Check IRQ data before use In case the leaf driver wants to use IRQ polling (irq = 0) and IIR register shows that an interrupt happened in the 8250 hardware the IRQ data can be NULL. In such a case we need to skip the wake event as we came to this path from the timer interrupt and quite likely system is already awake. Without this fix we have got an Oops: serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A ... BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:serial8250_handle_irq+0x7c/0x240 Call Trace: ? serial8250_handle_irq+0x7c/0x240 ? __pfx_serial8250_timeout+0x10/0x10Show less

In the Linux kernel, the following vulnerability has been resolved: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239. The commit above is reverted as it did not solve the original issue. gsm_cleanup_mux() tries to free up the virtual ttys by calling gsm_dlci_release() for each available DLCI. There, dlci_put() is called to decrease the reference counter for the DLCI via tty_port_put() which finally calls gsm_dlci_free(). This already clears the pointer which is being checked in gsm_cleanup_mux() before calling gsm_dlci_release(). Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux() as done in the reverted commit. The commit introduces a null pointer dereference: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x156/0x420 ? search_exception_tables+0x37/0x50 ? fixup_exception+0x21/0x310 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? tty_port_put+0x19/0xa0 gsmtty_cleanup+0x29/0x80 [n_gsm] release_one_tty+0x37/0xe0 process_one_work+0x1e6/0x3e0 worker_thread+0x4c/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The actual issue is that nothing guards dlci_put() from being called multiple times while the tty driver was triggered but did not yet finished calling gsm_dlci_free().Show less

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages sent from one TCP socket (s1) to actually egress from another TCP socket (s2): tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg tcp_bpf_send_verdict(s1) // __SK_REDIRECT case tcp_bpf_sendmsg_redir(s2) tcp_bpf_push_locked(s2) tcp_bpf_push(s2) tcp_rate_check_app_limited(s2) // expects tcp_sock tcp_sendmsg_locked(s2) // ditto There is a hard-coded assumption in the call-chain, that the egress socket (s2) is a TCP socket. However in commit 122e6c79efe1 ("sock_map: Update sock type checks for UDP") we have enabled redirects to non-TCP sockets. This was done for the sake of BPF sk_skb programs. There was no indention to support sk_msg send-to-egress use case. As a result, attempts to send-to-egress through a non-TCP socket lead to a crash due to invalid downcast from sock to tcp_sock: BUG: kernel NULL pointer dereference, address: 000000000000002f ... Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x1f/0x70 ? page_fault_oops+0x80/0x160 ? do_user_addr_fault+0x2d7/0x800 ? rcu_is_watching+0x11/0x50 ? exc_page_fault+0x70/0x1c0 ? asm_exc_page_fault+0x27/0x30 ? tcp_tso_segs+0x14/0xa0 tcp_write_xmit+0x67/0xce0 __tcp_push_pending_frames+0x32/0xf0 tcp_push+0x107/0x140 tcp_sendmsg_locked+0x99f/0xbb0 tcp_bpf_push+0x19d/0x3a0 tcp_bpf_sendmsg_redir+0x55/0xd0 tcp_bpf_send_verdict+0x407/0x550 tcp_bpf_sendmsg+0x1a1/0x390 inet_sendmsg+0x6a/0x70 sock_sendmsg+0x9d/0xc0 ? sockfd_lookup_light+0x12/0x80 __sys_sendto+0x10e/0x160 ? syscall_enter_from_user_mode+0x20/0x60 ? __this_cpu_preempt_check+0x13/0x20 ? lockdep_hardirqs_on+0x82/0x110 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg program to prevent the crash. When attempted, user will receive an EACCES error from send/sendto/sendmsg() syscall.Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix connection failure handling In case immediate MPA request processing fails, the newly created endpoint unlinks the listening endpoint and is ready to be dropped. This special case was not handled correctly by the code handling the later TCP socket close, causing a NULL dereference crash in siw_cm_work_handler() when dereferencing a NULL listener. We now also cancel the useless MPA timeout, if immediate MPA request processing fails. This patch furthermore simplifies MPA processing in general: Scheduling a useless TCP socket read in sk_data_ready() upcall is now surpressed, if the socket is already moved out of TCP_ESTABLISHED state.Show less

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set all reserved memblocks on Node#0 at initialization After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()") we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled: [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733 [ 0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90 [ 0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0 [ 0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000 [ 0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800 [ 0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20 [ 0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000 [ 0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000 [ 0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000 [ 0.000000] ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c [ 0.000000] ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0) [ 0.000000] BADV: 0000000000002b82 [ 0.000000] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00 [ 0.000000] 900000000470e000 90000000002c1918 0000000000000000 9000000004110780 [ 0.000000] 00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748 [ 0.000000] 0000000000000000 900000000421ca84 9000000004620000 9000000004564970 [ 0.000000] 90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000 [ 0.000000] 9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000 [ 0.000000] 0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918 [ 0.000000] 90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000 [ 0.000000] 90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c [ 0.000000] 9000000004270008 0000000000000001 0000000000000000 90000000045ccd00 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c [ 0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350 [ 0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc [ 0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4 [ 0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc [ 0.000000] [ 0.000000] Code: 02eb21ad 00410f4c 380c31ac <262b818d> 6800b70d 02c1c196 0015001c 57fe4bb1 260002cd The reason is early memblock_reserve() in memblock_init() set node id to MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain reserve_bootmem_region() -> init_reserved_page(). After memblock_init(), those late calls of memblock_reserve() operate on subregions of memblock .memory regions. As a result, these reserved regions will be set to the correct node at the first iteration of memmap_init_reserved_pages(). So set all reserved memblocks on Node#0 at initialization can avoid this panic.Show less

In the Linux kernel, the following vulnerability has been resolved: platform/x86: ideapad-laptop: fix a NULL pointer dereference The third parameter of dytc_cql_command should not be NULL since it will be dereferenced immediately.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add pointer checks in qedf_update_link_speed() The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] <IRQ> [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250] __do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] </IRQ> API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_data.Show less

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.Show less