NULL Pointer Dereference

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security During our fuzz testing of the connection and disconnection process at the RFCOMM layer, we discovered this bug. By comparing the packets from a normal connection and disconnection process with the testcase that triggered a KASAN report. We analyzed the cause of this bug as follows: 1. In the packets captured during a normal connection, the host sends a `Read Encryption Key Size` type of `HCI_CMD` packet (Command Opcode: 0x1408) to the controller to inquire the length of encryption key.After receiving this packet, the controller immediately replies with a Command Completepacket (Event Code: 0x0e) to return the Encryption Key Size. 2. In our fuzz test case, the timing of the controller's response to this packet was delayed to an unexpected point: after the RFCOMM and L2CAP layers had disconnected but before the HCI layer had disconnected. 3. After receiving the Encryption Key Size Response at the time described in point 2, the host still called the rfcomm_check_security function. However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;` had already been released, and when the function executed `return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`, specifically when accessing `conn->hcon`, a null-ptr-deref error occurred. To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling rfcomm_recv_frame in rfcomm_process_rx.Show less

In the Linux kernel, the following vulnerability has been resolved: perf: RISCV: Fix panic on pmu overflow handler (1 << idx) of int is not desired when setting bits in unsigned long overflowed_ctrs, use BIT() instead. This panic happens when running 'perf record -e branches' on sophgo sg2042. [ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 273.320851] Oops [#1] [ 273.323179] Modules linked in: [ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9 [ 273.332521] Hardware name: Sophgo Mango (DT) [ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e [ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0 [ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978 [ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70 [ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000 [ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015 [ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a [ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0 [ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210 [ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098 [ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca [ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8 [ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d [ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62 [ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee [ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36 [ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e [ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74 [ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92 [ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783 [ 273.477921] ---[ end trace 0000000000000000 ]--- [ 273.482630] Kernel panic - not syncing: Fatal exception in interruptShow less

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel...Show less

In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the "hash_list" entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the "resume" and "postsuspend" methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ? __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]---Show less

In the Linux kernel, the following vulnerability has been resolved: clk: meson: Add missing clocks to axg_clk_regmaps Some clocks were missing from axg_clk_regmaps, which caused kernel panic during cat /sys/kernel/debug/clk/clk_summary [ 57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc ... [ 57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.436900] pc : regmap_read+0x1c/0x88 [ 57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.445611] sp : ffff800082f1b690 [ 57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70 [ 57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000 [ 57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000 [ 57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff [ 57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000 [ 57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100 [ 57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24 [ 57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710 [ 57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000 [ 57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000 [ 57.519615] Call trace: [ 57.522030] regmap_read+0x1c/0x88 [ 57.525393] clk_regmap_gate_is_enabled+0x3c/0xb0 [ 57.530050] clk_core_is_enabled+0x44/0x120 [ 57.534190] clk_summary_show_subtree+0x154/0x2f0 [ 57.538847] clk_summary_show_subtree+0x220/0x2f0 [ 57.543505] clk_summary_show_subtree+0x220/0x2f0 [ 57.548162] clk_summary_show_subtree+0x220/0x2f0 [ 57.552820] clk_summary_show_subtree+0x220/0x2f0 [ 57.557477] clk_summary_show_subtree+0x220/0x2f0 [ 57.562135] clk_summary_show_subtree+0x220/0x2f0 [ 57.566792] clk_summary_show_subtree+0x220/0x2f0 [ 57.571450] clk_summary_show+0x84/0xb8 [ 57.575245] seq_read_iter+0x1bc/0x4b8 [ 57.578954] seq_read+0x8c/0xd0 [ 57.582059] full_proxy_read+0x68/0xc8 [ 57.585767] vfs_read+0xb0/0x268 [ 57.588959] ksys_read+0x70/0x108 [ 57.592236] __arm64_sys_read+0x24/0x38 [ 57.596031] invoke_syscall+0x50/0x128 [ 57.599740] el0_svc_common.constprop.0+0x48/0xf8 [ 57.604397] do_el0_svc+0x28/0x40 [ 57.607675] el0_svc+0x34/0xb8 [ 57.610694] el0t_64_sync_handler+0x13c/0x158 [ 57.615006] el0t_64_sync+0x190/0x198 [ 57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00) [ 57.624668] ---[ end trace 0000000000000000 ]--- [jbrunet: add missing Fixes tag]Show less

In the Linux kernel, the following vulnerability has been resolved: quota: Fix potential NULL pointer dereference Below race may cause NULL pointer dereference P1 P2 dquot_free_inode quota_off drop_dquot_ref remove_dquot_ref dquots = i_dquot(inode) dquots = i_dquot(inode) srcu_read_lock dquots[cnt]) != NULL (1) dquots[type] = NULL (2) spin_lock(&dquots[cnt]->dq_dqb_lock) (3) .... If dquot_free_inode(or other routines) checks inode's quota pointers (1) before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer dereference will be triggered. So let's fix it by using a temporary pointer to avoid this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip It's possible that mtk_crtc->event is NULL in mtk_drm_crtc_finish_page_flip(). pending_needs_vblank value is set by mtk_crtc->event, but in mtk_drm_crtc_atomic_flush(), it's is not guarded by the same lock in mtk_drm_finish_page_flip(), thus a race condition happens. Consider the following case: CPU1 CPU2 step 1: mtk_drm_crtc_atomic_begin() mtk_crtc->event is not null, step 1: mtk_drm_crtc_atomic_flush: mtk_drm_crtc_update_config( !!mtk_crtc->event) step 2: mtk_crtc_ddp_irq -> mtk_drm_finish_page_flip: lock mtk_crtc->event set to null, pending_needs_vblank set to false unlock pending_needs_vblank set to true, step 2: mtk_crtc_ddp_irq -> mtk_drm_finish_page_flip called again, pending_needs_vblank is still true //null pointer Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more efficient to just check if mtk_crtc->event is null before use.Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix NULL pointer dereference in f2fs_submit_page_write() BUG: kernel NULL pointer dereference, address: 0000000000000014 RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? __die+0x29/0x70 ? page_fault_oops+0x154/0x4a0 ? prb_read_valid+0x20/0x30 ? __irq_work_queue_local+0x39/0xd0 ? irq_work_queue+0x36/0x70 ? do_user_addr_fault+0x314/0x6c0 ? exc_page_fault+0x7d/0x190 ? asm_exc_page_fault+0x2b/0x30 ? f2fs_submit_page_write+0x6cf/0x780 [f2fs] ? f2fs_submit_page_write+0x736/0x780 [f2fs] do_write_page+0x50/0x170 [f2fs] f2fs_outplace_write_data+0x61/0xb0 [f2fs] f2fs_do_write_data_page+0x3f8/0x660 [f2fs] f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs] f2fs_write_cache_pages+0x3da/0xbe0 [f2fs] ... It is possible that other threads have added this fio to io->bio and submitted the io->bio before entering f2fs_submit_page_write(). At this point io->bio = NULL. If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true, then an NULL pointer dereference error occurs at bio_get(io->bio). The original code for determining zone end was after "out:", which would have missed some fio who is zone end. I've moved this code before "skip:" to make sure it's done for each fio.Show less

In the Linux kernel, the following vulnerability has been resolved: nfs: fix panic when nfs4_ff_layout_prepare_ds() fails We've been seeing the following panic in production BUG: kernel NULL pointer dereference, address: 0000000000000065 PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0 RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] Call Trace: <TASK> ? __die+0x78/0xc0 ? page_fault_oops+0x286/0x380 ? __rpc_execute+0x2c3/0x470 [sunrpc] ? rpc_new_task+0x42/0x1c0 [sunrpc] ? exc_page_fault+0x5d/0x110 ? asm_exc_page_fault+0x22/0x30 ? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles] ? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles] pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4] pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4] ? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles] nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles] ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles] __nfs_pageio_add_request+0x154/0x6c0 [nfs] nfs_pageio_add_request+0x26b/0x380 [nfs] nfs_do_writepage+0x111/0x1e0 [nfs] nfs_writepages_callback+0xf/0x30 [nfs] write_cache_pages+0x17f/0x380 ? nfs_pageio_init_write+0x50/0x50 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] ? nfs_writepages+0x6d/0x210 [nfs] nfs_writepages+0x125/0x210 [nfs] do_writepages+0x67/0x220 ? generic_perform_write+0x14b/0x210 filemap_fdatawrite_wbc+0x5b/0x80 file_write_and_wait_range+0x6d/0xc0 nfs_file_fsync+0x81/0x170 [nfs] ? nfs_file_mmap+0x60/0x60 [nfs] __x64_sys_fsync+0x53/0x90 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Inspecting the core with drgn I was able to pull this >>> prog.crashed_thread().stack_trace()[0] #0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27 >>> prog.crashed_thread().stack_trace()[0]['idx'] (u32)1 >>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds (struct nfs4_ff_layout_ds *)0xffffffffffffffed This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds() which could error out initializing the mirror_ds, and then we go to clean it all up and our check is only for if (!mirror->mirror_ds). This is inconsistent with the rest of the users of mirror_ds, which have if (IS_ERR_OR_NULL(mirror_ds)) to keep from tripping over this exact scenario. Fix this up in ff_layout_cancel_io() to make sure we don't panic when we get an error. I also spot checked all the other instances of checking mirror_ds and we appear to be doing the correct checks everywhere, only unconditionally dereferencing mirror_ds when we know it would be valid.Show less

In the Linux kernel, the following vulnerability has been resolved: comedi: comedi_8255: Correct error in subdevice initialization The refactoring done in commit 5c57b1ccecc7 ("comedi: comedi_8255: Rework subdevice initialization functions") to the initialization of the io field of struct subdev_8255_private broke all cards using the drivers/comedi/drivers/comedi_8255.c module. Prior to 5c57b1ccecc7, __subdev_8255_init() initialized the io field in the newly allocated struct subdev_8255_private to the non-NULL callback given to the function, otherwise it used a flag parameter to select between subdev_8255_mmio and subdev_8255_io. The refactoring removed that logic and the flag, as subdev_8255_mm_init() and subdev_8255_io_init() now explicitly pass subdev_8255_mmio and subdev_8255_io respectively to __subdev_8255_init(), only __subdev_8255_init() never sets spriv->io to the supplied callback. That spriv->io is NULL leads to a later BUG: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 1 PID: 1210 Comm: systemd-udevd Not tainted 6.7.3-x86_64 #1 Hardware name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00 RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000 R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8 FS: 00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0 Call Trace: <TASK> ? __die_body+0x15/0x57 ? page_fault_oops+0x2ef/0x33c ? insert_vmap_area.constprop.0+0xb6/0xd5 ? alloc_vmap_area+0x529/0x5ee ? exc_page_fault+0x15a/0x489 ? asm_exc_page_fault+0x22/0x30 __subdev_8255_init+0x79/0x8d [comedi_8255] pci_8255_auto_attach+0x11a/0x139 [8255_pci] comedi_auto_config+0xac/0x117 [comedi] ? __pfx___driver_attach+0x10/0x10 pci_device_probe+0x88/0xf9 really_probe+0x101/0x248 __driver_probe_device+0xbb/0xed driver_probe_device+0x1a/0x72 __driver_attach+0xd4/0xed bus_for_each_dev+0x76/0xb8 bus_add_driver+0xbe/0x1be driver_register+0x9a/0xd8 comedi_pci_driver_register+0x28/0x48 [comedi_pci] ? __pfx_pci_8255_driver_init+0x10/0x10 [8255_pci] do_one_initcall+0x72/0x183 do_init_module+0x5b/0x1e8 init_module_from_file+0x86/0xac __do_sys_finit_module+0x151/0x218 do_syscall_64+0x72/0xdb entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7f72f50a0cb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 71 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd47e512d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000562dd06ae070 RCX: 00007f72f50a0cb9 RDX: 0000000000000000 RSI: 00007f72f52d32df RDI: 000000000000000e RBP: 0000000000000000 R08: 00007f72f5168b20 R09: 0000000000000000 R10: 0000000000000050 R11: 0000000000000246 R12: 00007f72f52d32df R13: 0000000000020000 R14: 0000562dd06785c0 R15: 0000562dcfd0e9a8 </TASK> Modules linked in: 8255_pci(+) comedi_8255 comedi_pci comedi intel_gtt e100(+) acpi_cpufreq rtc_cmos usbhid CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00 RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000 R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8 FS: ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map Just simply reordering the functions mlx5e_ptp_metadata_map_put and mlx5e_ptpsq_track_metadata in the mlx5e_txwqe_complete context is not good enough since both the compiler and CPU are free to reorder these two functions. If reordering does occur, the issue that was supposedly fixed by 7e3f3ba97e6c ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map") will be seen. This will lead to NULL pointer dereferences in mlx5e_ptpsq_mark_ts_cqes_undelivered in the NAPI polling context due to the tracking list being populated before the metadata map.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink() The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration.Show less

In the Linux kernel, the following vulnerability has been resolved: ice: fix uninitialized dplls mutex usage The pf->dplls.lock mutex is initialized too late, after its first use. Move it to the top of ice_dpll_init. Note that the "err_exit" error path destroys the mutex. And the mutex is the last thing destroyed in ice_dpll_deinit. This fixes the following warning with CONFIG_DEBUG_MUTEXES: ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0 ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link) ice 0000:10:00.0: PTP init successful ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40 Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c> CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3 Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023 Workqueue: events work_for_cpu_fn RIP: 0010:__mutex_lock+0x773/0xd40 Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a> RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8 FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x84/0x170 ? __mutex_lock+0x773/0xd40 ? report_bug+0x1c7/0x1d0 ? prb_read_valid+0x1b/0x30 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __mutex_lock+0x773/0xd40 ? rcu_is_watching+0x11/0x50 ? __kmalloc_node_track_caller+0x346/0x490 ? ice_dpll_lock_status_get+0x28/0x50 [ice] ? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice] ? ice_dpll_lock_status_get+0x28/0x50 [ice] ice_dpll_lock_status_get+0x28/0x50 [ice] dpll_device_get_one+0x14f/0x2e0 dpll_device_event_send+0x7d/0x150 dpll_device_register+0x124/0x180 ice_dpll_init_dpll+0x7b/0xd0 [ice] ice_dpll_init+0x224/0xa40 [ice] ? _dev_info+0x70/0x90 ice_load+0x468/0x690 [ice] ice_probe+0x75b/0xa10 [ice] ? _raw_spin_unlock_irqrestore+0x4f/0x80 ? process_one_work+0x1a3/0x500 local_pci_probe+0x47/0xa0 work_for_cpu_fn+0x17/0x30 process_one_work+0x20d/0x500 worker_thread+0x1df/0x3e0 ? __pfx_worker_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> irq event stamp: 125197 hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0 hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0 softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60 ---[ end trace 0000000000000000 ]---Show less

The memory allocation function ACPI_ALLOCATE_ZEROED does not guarantee a successful allocation, but the subsequent code directly dereferences the pointer that receives it, which may lead to null pointer dereference. To fix this issue, a null pointer check should be added. If it is null, return exception code AE_NO_MEMORY.Show less

net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-write credentials can use a malformed OID in a SET to the nsVacmAccessTable to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. Show less

net-snmp provides various tools relating to the Simple Network Management Protocol. Prior to version 5.9.2, a user with read-only credentials can use a malformed OID in a `GET-NEXT` to the `nsVacmAccessTable` to cause a NULL pointer dereference. Version 5.9.2 contains a patch. Users should use strong SNMPv3 credentials and avoid sharing the credentials. Those who must use SNMPv1 or SNMPv2c should use a complex community string and enhance the protection by restricting access to a given IP address range. Show less