NULL Pointer Dereference

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access When translating source to sink streams in the crossbar subdev, the driver tries to locate the remote subdev connected to the sink pad. The remote pad may be NULL, if userspace tries to enable a stream that ends at an unconnected crossbar sink. When that occurs, the driver dereferences the NULL pad, leading to a crash. Prevent the crash by checking if the pad is NULL before using it, and return an error if it is.Show less

In FRRouting (FRR) through 9.1, it is possible for the get_edge() function in ospf_te.c in the OSPF daemon to return a NULL pointer. In cases where calling functions do not handle the returned NULL value, the OSPF daemon crashes, leading to denial of service.Show less

simple-dhcp-server through ec976d2 allows remote attackers to cause a denial of service (daemon crash) by sending a DHCP packet without any option fields, which causes free_packet in dhcp_packet.c to dereference a NULL pointer.Show less

In the Linux kernel, the following vulnerability has been resolved: gpio: mockup: fix NULL pointer dereference when removing debugfs We now remove the device's debugfs entries when unbinding the driver. This now causes a NULL-pointer dereference on module exit because the platform devices are unregistered *after* the global debugfs directory has been recursively removed. Fix it by unregistering the devices first.Show less

In the Linux kernel, the following vulnerability has been resolved: ice: Fix crash by keep old cfg when update TCs more than queues There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed.Show less

In the Linux kernel, the following vulnerability has been resolved: sfc: fix null pointer dereference in efx_hard_start_xmit Trying to get the channel from the tx_queue variable here is wrong because we can only be here if tx_queue is NULL, so we shouldn't dereference it. As the above comment in the code says, this is very unlikely to happen, but it's wrong anyway so let's fix it. I hit this issue because of a different bug that caused tx_queue to be NULL. If that happens, this is the error message that we get here: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]Show less

In the Linux kernel, the following vulnerability has been resolved: sfc: fix TX channel offset when using legacy interrupts In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but that's not correct if efx_sepparate_tx_channels is false. In that case, the offset is 0 because the tx queues are in the single existing channel at index 0, together with the rx queue. Without this fix, as soon as you try to send any traffic, it tries to get the tx queues from an uninitialized channel getting these errors: WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc] [...] RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x360 __dev_queue_xmit+0x890/0xa40 [...] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc] [...] Call Trace: <IRQ> dev_hard_start_xmit+0xd7/0x230 sch_direct_xmit+0x9f/0x360 __dev_queue_xmit+0x890/0xa40 [...]Show less

In the Linux kernel, the following vulnerability has been resolved: sfc/siena: fix null pointer dereference in efx_hard_start_xmit Like in previous patch for sfc, prevent potential (but unlikely) NULL pointer dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */Show less

In the Linux kernel, the following vulnerability has been resolved: bonding: fix NULL deref in bond_rr_gen_slave_id Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held.Show less

In the Linux kernel, the following vulnerability has been resolved: aio: fix mremap after fork null-deref Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced a null-deref if mremap is called on an old aio mapping after fork as mm->ioctx_table will be set to NULL. [jmoyer@redhat.com: fix 80 column issue]Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: do not free live element Pablo reports a crash with large batches of elements with a back-to-back add/remove pattern. Quoting Pablo: add_elem("00000000") timeout 100 ms ... add_elem("0000000X") timeout 100 ms del_elem("0000000X") <---------------- delete one that was just added ... add_elem("00005000") timeout 100 ms 1) nft_pipapo_remove() removes element 0000000X Then, KASAN shows a splat. Looking at the remove function there is a chance that we will drop a rule that maps to a non-deactivated element. Removal happens in two steps, first we do a lookup for key k and return the to-be-removed element and mark it as inactive in the next generation. Then, in a second step, the element gets removed from the set/map. The _remove function does not work correctly if we have more than one element that share the same key. This can happen if we insert an element into a set when the set already holds an element with same key, but the element mapping to the existing key has timed out or is not active in the next generation. In such case its possible that removal will unmap the wrong element. If this happens, we will leak the non-deactivated element, it becomes unreachable. The element that got deactivated (and will be freed later) will remain reachable in the set data structure, this can result in a crash when such an element is retrieved during lookup (stale pointer). Add a check that the fully matching key does in fact map to the element that we have marked as inactive in the deactivation step. If not, we need to continue searching. Add a bug/warn trap at the end of the function as well, the remove function must not ever be called with an invisible/unreachable/non-existent element. v2: avoid uneeded temporary variable (Stefano)Show less

FreeRDP is a free implementation of the Remote Desktop Protocol. FreeRDP based clients prior to version 3.5.1 are vulnerable to a possible `NULL` access and crash. Version 3.5.1 contains a patch for the issue. No known workarounds are available.Show less

Wazuh is a free and open source platform used for threat prevention, detection, and response. A NULL pointer dereference was detected during fuzzing of the analysis engine, allowing malicious clients to DoS the analysis engine. The bug occurs when `analysisd` receives a syscollector message with the `hotfix` `msg_type` but lacking a `timestamp`. It uses `cJSON_GetObjectItem()` to get the `timestamp` object item and dereferences it without checking for a `NULL` value. A malicious client can DoS the analysis engine. This vulnerability is fixed in 4.7.1.Show less