NULL Pointer Dereference

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev suspend Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NULL-deref on non-serdev setup Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when setup() is called for a non-serdev controller.Show less

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix shrinker NULL crash with cgroup_disable=memory Christian reports a NULL deref in zswap that he bisected down to the zswap shrinker. The issue also cropped up in the bug trackers of libguestfs [1] and the Red Hat bugzilla [2]. The problem is that when memcg is disabled with the boot time flag, the zswap shrinker might get called with sc->memcg == NULL. This is okay in many places, like the lruvec operations. But it crashes in memcg_page_state() - which is only used due to the non-node accounting of cgroup's the zswap memory to begin with. Nhat spotted that the memcg can be NULL in the memcg-disabled case, and I was then able to reproduce the crash locally as well. [1] https://github.com/libguestfs/libguestfs/issues/139 [2] https://bugzilla.redhat.com/show_bug.cgi?id=2275252Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: sof-common: Add NULL check for normal_link string It's not granted that all entries of struct sof_conn_stream declare a `normal_link` (a non-SOF, direct link) string, and this is the case for SoCs that support only SOF paths (hence do not support both direct and SOF usecases). For example, in the case of MT8188 there is no normal_link string in any of the sof_conn_stream entries and there will be more drivers doing that in the future. To avoid possible NULL pointer KPs, add a NULL check for `normal_link`.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/powernv: Add a null pointer check in opal_powercap_init() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/powernv: Add a null pointer check to scom_debug_init_one() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Add a null pointer check, and release 'ent' to avoid memory leaks.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/powernv: Add a null pointer check in opal_event_init() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/imc-pmu: Add a null pointer check in update_events_in_group() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.Show less

In the Linux kernel, the following vulnerability has been resolved: efi: fix panic in kdump kernel Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: platform_get_resource replaced by wrong function The function platform_get_resource was replaced with devm_platform_ioremap_resource_byname and is called using 0 as name. This eventually ends up in platform_get_resource_byname in the call stack, where it causes a null pointer in strcmp. if (type == resource_type(r) && !strcmp(r->name, name)) It should have been replaced with devm_platform_ioremap_resource.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group The DisplayPort driver's sysfs nodes may be present to the userspace before typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns NULL in those cases. Remove manual sysfs node creation in favor of adding attribute group as default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is not used here otherwise the path to the sysfs nodes is no longer compliant with the ABI.Show less

In the Linux kernel, the following vulnerability has been resolved: lib/Kconfig.debug: TEST_IOV_ITER depends on MMU Trying to run the iov_iter unit test on a nommu system such as the qemu kc705-nommu emulation results in a crash. KTAP version 1 # Subtest: iov_iter # module: kunit_iov_iter 1..9 BUG: failure at mm/nommu.c:318/vmap()! Kernel panic - not syncing: BUG! The test calls vmap() directly, but vmap() is not supported on nommu systems, causing the crash. TEST_IOV_ITER therefore needs to depend on MMU.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize.Show less

Animate versions 24.0.2, 23.0.5 and earlier are affected by a NULL Pointer Dereference vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.Show less

A vulnerability has been identified in JT2Go (All versions < V2312.0005), Teamcenter Visualization V14.2 (All versions < V14.2.0.12), Teamcenter Visualization V14.3 (All versions < V14.3.0.10), Teamcenter Visualization V2312 (All versions < V2312.0005). The affected applications contain a null pointer dereference vulnerability while parsing specially crafted X_T files. An attacker could leverage this vulnerability to crash the application causing denial of service condition.Show less

An attacker who successfully exploited these vulnerabilities could cause the robot to stop, make the robot controller inaccessible. The vulnerability could potentially be exploited to perform unauthorized actions by an attacker. This vulnerability arises under specific condition when specially crafted message is processed by the system. Below are reported vulnerabilities in the Robot Ware versions. * IRC5- RobotWare 6 < 6.15.06 except 6.10.10, and 6.13.07 * OmniCore- RobotWare 7 < 7.14Show less