NULL Pointer Dereference

A vulnerability classified as problematic was found in Tenda FH451, FH1201, FH1202 and FH1206 up to 20241129. Affected by this vulnerability is the function websReadEvent of the file /goform/GetIPTV. The manipulation of the argument Content-Length leads to null pointer dereference. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.Show less

The webdriver for the Browser object expects an error object to be initialized when the webdriver_session_query function fails. But this function can fail for various reasons without an error description and then the wd->error will be NULL and trying to read from it will result in a crash.Show less

When the webdriver for the Browser object downloads data from a HTTP server, the data pointer is set to NULL and is allocated only in curl_write_cb when receiving data. If the server's response is an empty document, then wd->data in the code below will remain NULL and an attempt to read from it will result in a crash.Show less

A null pointer dereference may have inadvertently occurred in `pk12util`, and specifically in the `SEC_ASN1DecodeItem_Util` function, when handling malformed or improperly formatted input files. This vulnerability affects Firefox < 133 and Thunderbird < 133.Show less

`NSC_DeriveKey` inadvertently assumed that the `phKey` parameter is always non-NULL. When it was passed as NULL, a segmentation fault (SEGV) occurred, leading to crashes. This behavior conflicted with the PKCS#11 v3.0 specification, which allows `phKey` to be NULL for certain mechanisms. This vulnerability affects Firefox < 133 and Thunderbird < 133.Show less

A vulnerability was found in Tenda i9 1.0.0.8(3828) and classified as critical. This issue affects the function websReadEvent of the file /goform/GetIPTV. The manipulation leads to null pointer dereference. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.Show less

A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following versions: QTS 5.2.1.2930 build 20241025 and later QuTS hero h5.2.1.2929 build 20241025 and laterShow less

A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following versions: QTS 5.2.1.2930 build 20241025 and later QuTS hero h5.2.1.2929 build 20241025 and laterShow less

A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained administrator access to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following versions: QTS 5.2.1.2930 build 20241025 and later QuTS hero h5.2.1.2929 build 20241025 and laterShow less

In the Linux kernel, the following vulnerability has been resolved: virtio_pci: Fix admin vq cleanup by using correct info pointer vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ==================================================================Show less

A vulnerability was found in AVL-DiTEST-DiagDev libdoip 1.0.0. It has been rated as problematic. This issue affects the function DoIPConnection::reactOnReceivedTcpMessage of the file DoIPConnection.cpp. The manipulation leads to null pointer dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer.Show less

In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported acpi_evaluate_object() may return AE_NOT_FOUND (failure), which would result in dereferencing buffer.pointer (obj) while being NULL. Although this case may be unrealistic for the current code, it is still better to protect against possible bugs. Bail out also when status is AE_NOT_FOUND. This fixes 1 FORWARD_NULL issue reported by Coverity Report: CID 1600951: Null pointer dereferences (FORWARD_NULL) (cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference.Show less

In the Linux kernel, the following vulnerability has been resolved: mctp i2c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol.Show less

In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8Show less