NULL Pointer Dereference

In the Linux kernel, the following vulnerability has been resolved: nbd: call genl_unregister_family() first in nbd_cleanup() Otherwise there may be race between module removal and the handling of netlink command, which can lead to the oops as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000098 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:down_write+0x1a/0x50 Call Trace: start_creating+0x89/0x130 debugfs_create_dir+0x1b/0x130 nbd_start_device+0x13d/0x390 [nbd] nbd_genl_connect+0x42f/0x748 [nbd] genl_family_rcv_msg_doit.isra.0+0xec/0x150 genl_rcv_msg+0xe5/0x1e0 netlink_rcv_skb+0x55/0x100 genl_rcv+0x29/0x40 netlink_unicast+0x1a8/0x250 netlink_sendmsg+0x21b/0x430 ____sys_sendmsg+0x2a4/0x2d0 ___sys_sendmsg+0x81/0xc0 __sys_sendmsg+0x62/0xb0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: nbd(E-)Show less

In the Linux kernel, the following vulnerability has been resolved: tpm: use try_get_ops() in tpm-space.c As part of the series conversion to remove nested TPM operations: https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/ exposure of the chip->tpm_mutex was removed from much of the upper level code. In this conversion, tpm2_del_space() was missed. This didn't matter much because it's usually called closely after a converted operation, so there's only a very tiny race window where the chip can be removed before the space flushing is done which causes a NULL deref on the mutex. However, there are reports of this window being hit in practice, so fix this by converting tpm2_del_space() to use tpm_try_get_ops(), which performs all the teardown checks before acquring the mutex.Show less

In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: use the correct logic to get mma8452_data The original logic to get mma8452_data is wrong, the *dev point to the device belong to iio_dev. we can't use this dev to find the correct i2c_client. The original logic happen to work because it finally use dev->driver_data to get iio_dev. Here use the API to_i2c_client() is wrong and make reader confuse. To correct the logic, it should be like this struct mma8452_data *data = iio_priv(dev_get_drvdata(dev)); But after commit 8b7651f25962 ("iio: iio_device_alloc(): Remove unnecessary self drvdata"), the upper logic also can't work. When try to show the avialable scale in userspace, will meet kernel dump, kernel handle NULL pointer dereference. So use dev_to_iio_dev() to correct the logic. Dual fixes tags as the second reflects when the bug was exposed, whilst the first reflects when the original bug was introduced.Show less

In the Linux kernel, the following vulnerability has been resolved: f2fs: quota: fix loop condition at f2fs_quota_sync() cnt should be passed to sb_has_quota_active() instead of type to check active quota properly. Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]): [ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUsShow less

In the Linux kernel, the following vulnerability has been resolved: rtc: pl031: fix rtc features null pointer dereference When there is no interrupt line, rtc alarm feature is disabled. The clearing of the alarm feature bit was being done prior to allocations of ldata->rtc device, resulting in a null pointer dereference. Clear RTC_FEATURE_ALARM after the rtc device is allocated.Show less

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent bad output lengths in smb2_ioctl_query_info() When calling smb2_ioctl_query_info() with smb_query_info::flags=PASSTHRU_FSCTL and smb_query_info::output_buffer_length=0, the following would return 0x10 buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length); if (IS_ERR(buffer)) { kfree(vars); return PTR_ERR(buffer); } rather than a valid pointer thus making IS_ERR() check fail. This would then cause a NULL ptr deference in @buffer when accessing it later in smb2_ioctl_query_ioctl(). While at it, prevent having a @buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO FileEndOfFileInformation requests when smb_query_info::flags=PASSTHRU_SET_INFO. Here is a small C reproducer which triggers a NULL ptr in @buffer when passing an invalid smb_query_info::flags #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> #define die(s) perror(s), exit(1) #define QUERY_INFO 0xc018cf07 int main(int argc, char *argv[]) { int fd; if (argc < 2) exit(1); fd = open(argv[1], O_RDONLY); if (fd == -1) die("open"); if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1) die("ioctl"); close(fd); return 0; } mount.cifs //srv/share /mnt -o ... gcc repro.c && ./a.out /mnt/f0 [ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1 [ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs] [ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24 [ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256 [ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d [ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380 [ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003 [ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288 [ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000 [ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000 [ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0 [ 114.146131] Call Trace: [ 114.146291] <TASK> [ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs] [ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs] [ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs] [ 114.147775] ? dentry_path_raw+0xa6/0xf0 [ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs] [ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs] [ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs] [ 114.149371] ? lock_downgrade+0x6f0/0x6f0 [ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs] [ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0 [ 114.150562] ? __up_read+0x192/0x710 [ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0 [ 114.151025] ? __x64_sys_openat+0x11f/0x1d0 [ 114.151296] __x64_sys_ioctl+0x127/0x190 [ 114.151549] do_syscall_64+0x3b/0x90 [ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 114.152079] RIP: 0033:0x7f7aead043df [ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: Fix NULL ptr dereference when ENOMEM Do not call snd_dma_free_pages() when snd_dma_alloc_pages() returns -ENOMEM because it leads to a NULL pointer dereference bug. The dmesg says: [ T1387] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12 [ T1387] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ T1387] #PF: supervisor read access in kernel mode [ T1387] #PF: error_code(0x0000) - not-present page [ T1387] PGD 0 P4D 0 [ T1387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ T1387] CPU: 6 PID: 1387 Comm: alsa-sink-HDA A Tainted: G W 5.17.0-rc4-superb-owl-00055-g80d47f5de5e3 [ T1387] Hardware name: HP HP Laptop 14s-dq2xxx/87FD, BIOS F.15 09/15/2021 [ T1387] RIP: 0010:dma_free_noncontiguous+0x37/0x80 [ T1387] Code: [... snip ...] [ T1387] RSP: 0000:ffffc90002b87770 EFLAGS: 00010246 [ T1387] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ T1387] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888101db30d0 [ T1387] RBP: 00000000fffffff4 R08: 0000000000000000 R09: 0000000000000000 [ T1387] R10: 0000000000000000 R11: ffffc90002b874d0 R12: 0000000000000001 [ T1387] R13: 0000000000058000 R14: ffff888105260c68 R15: ffff888105260828 [ T1387] FS: 00007f42e2ffd640(0000) GS:ffff888466b80000(0000) knlGS:0000000000000000 [ T1387] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ T1387] CR2: 0000000000000000 CR3: 000000014acf0003 CR4: 0000000000770ee0 [ T1387] PKRU: 55555554 [ T1387] Call Trace: [ T1387] <TASK> [ T1387] cl_stream_prepare+0x10a/0x120 [snd_sof_intel_hda_common 146addf995b9279ae7f509621078cccbe4f875e1] [... snip ...] [ T1387] </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: exec: Force single empty string when argv is empty Quoting[1] Ariadne Conill: "In several other operating systems, it is a hard requirement that the second argument to execve(2) be the name of a program, thus prohibiting a scenario where argc < 1. POSIX 2017 also recommends this behaviour, but it is not an explicit requirement[2]: The argument arg0 should point to a filename string that is associated with the process being started by one of the exec functions. ... Interestingly, Michael Kerrisk opened an issue about this in 2008[3], but there was no consensus to support fixing this issue then. Hopefully now that CVE-2021-4034 shows practical exploitative use[4] of this bug in a shellcode, we can reconsider. This issue is being tracked in the KSPP issue tracker[5]." While the initial code searches[6][7] turned up what appeared to be mostly corner case tests, trying to that just reject argv == NULL (or an immediately terminated pointer list) quickly started tripping[8] existing userspace programs. The next best approach is forcing a single empty string into argv and adjusting argc to match. The number of programs depending on argc == 0 seems a smaller set than those calling execve with a NULL argv. Account for the additional stack space in bprm_stack_limits(). Inject an empty string when argc == 0 (and set argc = 1). Warn about the case so userspace has some notice about the change: process './argc0' launched './argc0' with NULL argv: empty string added Additionally WARN() and reject NULL argv usage for kernel threads. [1] https://lore.kernel.org/lkml/20220127000724.15106-1-ariadne@dereferenced.org/ [2] https://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html [3] https://bugzilla.kernel.org/show_bug.cgi?id=8408 [4] https://www.qualys.com/2022/01/25/cve-2021-4034/pwnkit.txt [5] https://github.com/KSPP/linux/issues/176 [6] https://codesearch.debian.net/search?q=execve%5C+*%5C%28%5B%5E%2C%5D%2B%2C+*NULL&literal=0 [7] https://codesearch.debian.net/search?q=execlp%3F%5Cs*%5C%28%5B%5E%2C%5D%2B%2C%5Cs*NULL&literal=0 [8] https://lore.kernel.org/lkml/20220131144352.GE16385@xsang-OptiPlex-9020/Show less

In the Linux kernel, the following vulnerability has been resolved: crypto: octeontx2 - remove CONFIG_DM_CRYPT check No issues were found while using the driver with dm-crypt enabled. So CONFIG_DM_CRYPT check in the driver can be removed. This also fixes the NULL pointer dereference in driver release if CONFIG_DM_CRYPT is enabled. ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... Call trace: crypto_unregister_alg+0x68/0xfc crypto_unregister_skciphers+0x44/0x60 otx2_cpt_crypto_exit+0x100/0x1a0 otx2_cptvf_remove+0xf8/0x200 pci_device_remove+0x3c/0xd4 __device_release_driver+0x188/0x234 device_release_driver+0x2c/0x4c ...Show less

In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix NULL dereference in error cleanup In watch_queue_set_size(), the error cleanup code doesn't take account of the fact that __free_page() can't handle a NULL pointer when trying to free up buffer pages that did get allocated. Fix this by only calling __free_page() on the pages actually allocated. Without the fix, this can lead to something like the following: BUG: KASAN: null-ptr-deref in __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 Read of size 4 at addr 0000000000000034 by task syz-executor168/3599 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold+0x66/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] page_ref_count include/linux/page_ref.h:67 [inline] put_page_testzero include/linux/mm.h:717 [inline] __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 watch_queue_set_size+0x499/0x630 kernel/watch_queue.c:275 pipe_ioctl+0xac/0x2b0 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xaeShow less

In the Linux kernel, the following vulnerability has been resolved: media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats() In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to ctx->active_fmt and there is a dereference of it after that, which could lead to NULL pointer dereference on failure of devm_kzalloc(). Fix this bug by adding a NULL check of ctx->active_fmt. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes() In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode() is assigned to mode and is passed to drm_mode_probed_add() directly after that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and there is a dereference of it in list_add_tail() without recoveries, which could lead to NULL pointer dereference on failure of amdgpu_dm_create_common_mode(). Fix this by adding a NULL check of mode. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.Show less

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a btf decl_tag bug when tagging a function syzbot reported a btf decl_tag bug with stack trace below: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 3592 Comm: syz-executor914 Not tainted 5.16.0-syzkaller-11424-gb7892f7d5cb2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:btf_type_vlen include/linux/btf.h:231 [inline] RIP: 0010:btf_decl_tag_resolve+0x83e/0xaa0 kernel/bpf/btf.c:3910 ... Call Trace: <TASK> btf_resolve+0x251/0x1020 kernel/bpf/btf.c:4198 btf_check_all_types kernel/bpf/btf.c:4239 [inline] btf_parse_type_sec kernel/bpf/btf.c:4280 [inline] btf_parse kernel/bpf/btf.c:4513 [inline] btf_new_fd+0x19fe/0x2370 kernel/bpf/btf.c:6047 bpf_btf_load kernel/bpf/syscall.c:4039 [inline] __sys_bpf+0x1cbb/0x5970 kernel/bpf/syscall.c:4679 __do_sys_bpf kernel/bpf/syscall.c:4738 [inline] __se_sys_bpf kernel/bpf/syscall.c:4736 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4736 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The kasan error is triggered with an illegal BTF like below: type 0: void type 1: int type 2: decl_tag to func type 3 type 3: func to func_proto type 8 The total number of types is 4 and the type 3 is illegal since its func_proto type is out of range. Currently, the target type of decl_tag can be struct/union, var or func. Both struct/union and var implemented their own 'resolve' callback functions and hence handled properly in kernel. But func type doesn't have 'resolve' callback function. When btf_decl_tag_resolve() tries to check func type, it tries to get vlen of its func_proto type, which triggered the above kasan error. To fix the issue, btf_decl_tag_resolve() needs to do btf_func_check() before trying to accessing func_proto type. In the current implementation, func type is checked with btf_func_check() in the main checking function btf_check_all_types(). To fix the above kasan issue, let us implement 'resolve' callback func type properly. The 'resolve' callback will be also called in btf_check_all_types() for func types.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: populate connector of struct dp_panel DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose and expect DP source return correct checksum. During drm edid read, correct edid checksum is calculated and stored at connector::real_edid_checksum. The problem is struct dp_panel::connector never be assigned, instead the connector is stored in struct msm_dp::connector. When we run compliance testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid edid set in struct dp_panel::edid so we'll try to use the connectors real_edid_checksum and hit a NULL pointer dereference error because the connector pointer is never assigned. Changes in V2: -- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps() Changes in V3: -- remove unhelpful kernel crash trace commit text -- remove renaming dp_display parameter to dp Changes in V4: -- add more details to commit text Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>Show less

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race at socket teardown Fix a race in the xsk socket teardown code that can lead to a NULL pointer dereference splat. The current xsk unbind code in xsk_unbind_dev() starts by setting xs->state to XSK_UNBOUND, sets xs->dev to NULL and then waits for any NAPI processing to terminate using synchronize_net(). After that, the release code starts to tear down the socket state and free allocated memory. BUG: kernel NULL pointer dereference, address: 00000000000000c0 PGD 8000000932469067 P4D 8000000932469067 PUD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 25 PID: 69132 Comm: grpcpp_sync_ser Tainted: G I 5.16.0+ #2 Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.2.10 03/09/2015 RIP: 0010:__xsk_sendmsg+0x2c/0x690 [...] RSP: 0018:ffffa2348bd13d50 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000040 RCX: ffff8d5fc632d258 RDX: 0000000000400000 RSI: ffffa2348bd13e10 RDI: ffff8d5fc5489800 RBP: ffffa2348bd13db0 R08: 0000000000000000 R09: 00007ffffffff000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d5fc5489800 R13: ffff8d5fcb0f5140 R14: ffff8d5fcb0f5140 R15: 0000000000000000 FS: 00007f991cff9400(0000) GS:ffff8d6f1f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000000114888005 CR4: 00000000001706e0 Call Trace: <TASK> ? aa_sk_perm+0x43/0x1b0 xsk_sendmsg+0xf0/0x110 sock_sendmsg+0x65/0x70 __sys_sendto+0x113/0x190 ? debug_smp_processor_id+0x17/0x20 ? fpregs_assert_state_consistent+0x23/0x50 ? exit_to_user_mode_prepare+0xa5/0x1d0 __x64_sys_sendto+0x29/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae There are two problems with the current code. First, setting xs->dev to NULL before waiting for all users to stop using the socket is not correct. The entry to the data plane functions xsk_poll(), xsk_sendmsg(), and xsk_recvmsg() are all guarded by a test that xs->state is in the state XSK_BOUND and if not, it returns right away. But one process might have passed this test but still have not gotten to the point in which it uses xs->dev in the code. In this interim, a second process executing xsk_unbind_dev() might have set xs->dev to NULL which will lead to a crash for the first process. The solution here is just to get rid of this NULL assignment since it is not used anymore. Before commit 42fddcc7c64b ("xsk: use state member for socket synchronization"), xs->dev was the gatekeeper to admit processes into the data plane functions, but it was replaced with the state variable xs->state in the aforementioned commit. The second problem is that synchronize_net() does not wait for any process in xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() to complete, which means that the state they rely on might be cleaned up prematurely. This can happen when the notifier gets called (at driver unload for example) as it uses xsk_unbind_dev(). Solve this by extending the RCU critical region from just the ndo_xsk_wakeup to the whole functions mentioned above, so that both the test of xs->state == XSK_BOUND and the last use of any member of xs is covered by the RCU critical section. This will guarantee that when synchronize_net() completes, there will be no processes left executing xsk_poll(), xsk_sendmsg(), or xsk_recvmsg() and state can be cleaned up safely. Note that we need to drop the RCU lock for the skb xmit path as it uses functions that might sleep. Due to this, we have to retest the xs->state after we grab the mutex that protects the skb xmit code from, among a number of things, an xsk_unbind_dev() being executed from the notifier at the same time.Show less

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: add missing NULL check in h5_enqueue Syzbot hit general protection fault in __pm_runtime_resume(). The problem was in missing NULL check. hu->serdev can be NULL and we should not blindly pass &serdev->dev somewhere, since it will cause GPF.Show less

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: fix race between xmit and reset There is a race between reset and the transmit paths that can lead to ibmvnic_xmit() accessing an scrq after it has been freed in the reset path. It can result in a crash like: Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000016189f8 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic] LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 Call Trace: [c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable) [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c9cfcc] sch_direct_xmit+0xec/0x330 [c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0 [c000000000c00ad4] __dev_queue_xmit+0x394/0x730 [c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding] [c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding] [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c00ca4] __dev_queue_xmit+0x564/0x730 [c000000000cf97e0] neigh_hh_output+0xd0/0x180 [c000000000cfa69c] ip_finish_output2+0x31c/0x5c0 [c000000000cfd244] __ip_queue_xmit+0x194/0x4f0 [c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0 [c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0 [c000000000d2d984] tcp_retransmit_skb+0x34/0x130 [c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0 [c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330 [c000000000d317bc] tcp_write_timer+0x5c/0x200 [c000000000243270] call_timer_fn+0x50/0x1c0 [c000000000243704] __run_timers.part.0+0x324/0x460 [c000000000243894] run_timer_softirq+0x54/0xa0 [c000000000ea713c] __do_softirq+0x15c/0x3e0 [c000000000166258] __irq_exit_rcu+0x158/0x190 [c000000000166420] irq_exit+0x20/0x40 [c00000000002853c] timer_interrupt+0x14c/0x2b0 [c000000000009a00] decrementer_common_virt+0x210/0x220 --- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c The immediate cause of the crash is the access of tx_scrq in the following snippet during a reset, where the tx_scrq can be either NULL or an address that will soon be invalid: ibmvnic_xmit() { ... tx_scrq = adapter->tx_scrq[queue_num]; txq = netdev_get_tx_queue(netdev, queue_num); ind_bufp = &tx_scrq->ind_buf; if (test_bit(0, &adapter->resetting)) { ... } But beyond that, the call to ibmvnic_xmit() itself is not safe during a reset and the reset path attempts to avoid this by stopping the queue in ibmvnic_cleanup(). However just after the queue was stopped, an in-flight ibmvnic_complete_tx() could have restarted the queue even as the reset is progressing. Since the queue was restarted we could get a call to ibmvnic_xmit() which can then access the bad tx_scrq (or other fields). We cannot however simply have ibmvnic_complete_tx() check the ->resetting bit and skip starting the queue. This can race at the "back-end" of a good reset which just restarted the queue but has not cleared the ->resetting bit yet. If we skip restarting the queue due to ->resetting being true, the queue would remain stopped indefinitely potentially leading to transmit timeouts. IOW ->resetting is too broad for this purpose. Instead use a new flag that indicates whether or not the queues are active. Only the open/ reset paths control when the queues are active. ibmvnic_complete_tx() and others wake up the queue only if the queue is marked active. So we will have: A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open() ->resetting = true ->tx_queues_active = false disable tx queues ... ->tx_queues_active = true start tx queues B. Tx interrupt in ibmvnic_complete_tx(): if (->tx_queues_active) netif_wake_subqueue(); To ensure that ->tx_queues_active and state of the queues are consistent, we need a lock which: - must also be taken in the interrupt path (ibmvnic_complete_tx()) - shared across the multiple ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic on shutdown if multi-chip tree failed to probe DSA probing is atypical because a tree of devices must probe all at once, so out of N switches which call dsa_tree_setup_routing_table() during probe, for (N - 1) of them, "complete" will return false and they will exit probing early. The Nth switch will set up the whole tree on their behalf. The implication is that for (N - 1) switches, the driver binds to the device successfully, without doing anything. When the driver is bound, the ->shutdown() method may run. But if the Nth switch has failed to initialize the tree, there is nothing to do for the (N - 1) driver instances, since the slave devices have not been created, etc. Moreover, dsa_switch_shutdown() expects that the calling @ds has been in fact initialized, so it jumps at dereferencing the various data structures, which is incorrect. Avoid the ensuing NULL pointer dereferences by simply checking whether the Nth switch has previously set "ds->setup = true" for the switch which is currently shutting down. The entire setup is serialized under dsa2_mutex which we already hold.Show less

In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_hw_get_clk() when dev is NULL Any registered clk_core structure can have a NULL pointer in its dev field. While never actually documented, this is evidenced by the wide usage of clk_register and clk_hw_register with a NULL device pointer, and the fact that the core of_clk_hw_register() function also passes a NULL device pointer. A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that case will result in a NULL pointer derefence when it calls dev_name() on that NULL device pointer. Add a test for this case and use NULL as the dev_id if the device pointer is NULL.Show less