NULL Pointer Dereference

In the function process_crypto_cmd, the values of ptrs[i] can be potentially equal to NULL which is valid value after calling slice_map_array(). Later this values will be derefenced without prior NULL check, which can lead to local Temporary DoS or OOB Read, leading to information disclosure.Show less

In the Linux kernel, the following vulnerability has been resolved: net_sched: Flush gso_skb list too during ->change() Previously, when reducing a qdisc's limit via the ->change() operation, only the main skb queue was trimmed, potentially leaving packets in the gso_skb list. This could result in NULL pointer dereference when we only check sch->limit against sch->q.qlen. This patch introduces a new helper, qdisc_dequeue_internal(), which ensures both the gso_skb list and the main queue are properly flushed when trimming excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie) are updated to use this helper in their ->change() routines.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing check for zpci_create_device() error return The zpci_create_device() function returns an error pointer that needs to be checked before dereferencing it as a struct zpci_dev pointer. Add the missing check in __clp_add() where it was missed when adding the scan_list in the fixed commit. Simply not adding the device to the scan list results in the previous behavior.Show less

In the Linux kernel, the following vulnerability has been resolved: Input: mtk-pmic-keys - fix possible null pointer dereference In mtk_pmic_keys_probe, the regs parameter is only set if the button is parsed in the device tree. However, on hardware where the button is left floating, that node will most likely be removed not to enable that input. In that case the code will try to dereference a null pointer. Let's use the regs struct instead as it is defined for all supported platforms. Note that it is ok setting the key reg even if that latter is disabled as the interrupt won't be enabled anyway.Show less

In the Linux kernel, the following vulnerability has been resolved: staging: bcm2835-camera: Initialise dev in v4l2_dev Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state") changed mmal_init to pass dev->v4l2_dev.dev to vchiq_mmal_init, however nothing iniitialised dev->v4l2_dev, so we got a NULL pointer dereference. Set dev->v4l2_dev.dev during bcm2835_mmal_probe. The device pointer could be passed into v4l2_device_register to set it, however that also has other effects that would need additional changes.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix dereferencing invalid pmd migration entry When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ffffea60001db008 CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60 Call Trace: <TASK> try_to_migrate_one+0x28c/0x3730 rmap_walk_anon+0x4f6/0x770 unmap_folio+0x196/0x1f0 split_huge_page_to_list_to_order+0x9f6/0x1560 deferred_split_scan+0xac5/0x12a0 shrinker_debugfs_scan_write+0x376/0x470 full_proxy_write+0x15c/0x220 vfs_write+0x2fc/0xcb0 ksys_write+0x146/0x250 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug is found by syzkaller on an internal kernel, then confirmed on upstream.Show less

In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_deactivate() idempotent Alan reported a NULL pointer dereference in htb_next_rb_node() after we made htb_qlen_notify() idempotent. It turns out in the following case it introduced some regression: htb_dequeue_tree(): |-> fq_codel_dequeue() |-> qdisc_tree_reduce_backlog() |-> htb_qlen_notify() |-> htb_deactivate() |-> htb_next_rb_node() |-> htb_deactivate() For htb_next_rb_node(), after calling the 1st htb_deactivate(), the clprio[prio]->ptr could be already set to NULL, which means htb_next_rb_node() is vulnerable here. For htb_deactivate(), although we checked qlen before calling it, in case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again which triggers the warning inside. To fix the issues here, we need to: 1) Make htb_deactivate() idempotent, that is, simply return if we already call it before. 2) Make htb_next_rb_node() safe against ptr==NULL. Many thanks to Alan for testing and for the reproducer.Show less

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix panic in failed foilio allocation commit 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") and commit 9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of pages") save -ENOMEM in the folio array upon allocation failure and call the folio array free code. The folio array free code expects either valid folio pointers or NULL. Finding the -ENOMEM will result in a panic. Fix by NULLing the error folio entry.Show less

In the Linux kernel, the following vulnerability has been resolved: xenbus: Use kref to track req lifetime Marek reported seeing a NULL pointer fault in the xenbus_thread callstack: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: e030:__wake_up_common+0x4c/0x180 Call Trace: <TASK> __wake_up_common_lock+0x82/0xd0 process_msg+0x18e/0x2f0 xenbus_thread+0x165/0x1c0 process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems like it was xs_wake_up() in this case. It seems like req may have woken up the xs_wait_for_reply(), which kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed data. Linux Device Drivers 2nd edition states: "Normally, a wake_up call can cause an immediate reschedule to happen, meaning that other processes might run before wake_up returns." ... which would match the behaviour observed. Change to keeping two krefs on each request. One for the caller, and one for xenbus_thread. Each will kref_put() when finished, and the last will free it. This use of kref matches the description in Documentation/core-api/kref.rstShow less

In the Linux kernel, the following vulnerability has been resolved: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed b ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: tracing: Verify event formats that have "%*p.." The trace event verifier checks the formats of trace events to make sure that they do not point at memory that is not in the trace event itself or in data that will never be freed. If an event references data that was allocated when the event triggered and that same data is freed before the event is read, then the kernel can crash by reading freed memory. The verifier runs at boot up (or module load) and scans the print formats of the events and checks their arguments to make sure that dereferenced pointers are safe. If the format uses "%*p.." the verifier will ignore it, and that could be dangerous. Cover this case as well. Also add to the sample code a use case of "%*pbl".Show less

In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists") added some additional CPUs to the Spectre-BHB workaround, including some new arrays for designs that require new 'k' values for the workaround to be effective. Unfortunately, the new arrays omitted the sentinel entry and so is_midr_in_range_list() will walk off the end when it doesn't find a match. With UBSAN enabled, this leads to a crash during boot when is_midr_in_range_list() is inlined (which was more common prior to c8c2647e69be ("arm64: Make  _midr_in_range_list() an exported function")): | Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP | pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : spectre_bhb_loop_affected+0x28/0x30 | lr : is_spectre_bhb_affected+0x170/0x190 | [...] | Call trace: | spectre_bhb_loop_affected+0x28/0x30 | update_cpu_capabilities+0xc0/0x184 | init_cpu_features+0x188/0x1a4 | cpuinfo_store_boot_cpu+0x4c/0x60 | smp_prepare_boot_cpu+0x38/0x54 | start_kernel+0x8c/0x478 | __primary_switched+0xc8/0xd4 | Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: aarch64 BRK: Fatal exception Add the missing sentinel entries.Show less

In the Linux kernel, the following vulnerability has been resolved: book3s64/radix : Align section vmemmap start address to PAGE_SIZE A vmemmap altmap is a device-provided region used to provide backing storage for struct pages. For each namespace, the altmap should belong to that same namespace. If the namespaces are created unaligned, there is a chance that the section vmemmap start address could also be unaligned. If the section vmemmap start address is unaligned, the altmap page allocated from the current namespace might be used by the previous namespace also. During the free operation, since the altmap is shared between two namespaces, the previous namespace may detect that the page does not belong to its altmap and incorrectly assume that the page is a normal page. It then attempts to free the normal page, which leads to a kernel crash. Kernel attempted to read user page (18) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000018 Faulting instruction address: 0xc000000000530c7c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G W NIP: c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe REGS: c000000015e57040 TRAP: 0300 Tainted: G W MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 84482404 CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0 GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040 GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000 GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020 GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00 GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000 GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040 NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0 LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0 Call Trace: free_unref_page+0x50/0x1e0 free_reserved_page+0x40/0x68 free_vmemmap_pages+0x98/0xe0 remove_pte_table+0x164/0x1e8 remove_pmd_table+0x204/0x2c8 remove_pud_table+0x1c4/0x288 remove_pagetable+0x1c8/0x310 vmemmap_free+0x24/0x50 section_deactivate+0x28c/0x2a0 __remove_pages+0x84/0x110 arch_remove_memory+0x38/0x60 memunmap_pages+0x18c/0x3d0 devm_action_release+0x30/0x50 release_nodes+0x68/0x140 devres_release_group+0x100/0x190 dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat] device_for_each_child+0x8c/0x100 [dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat] nvdimm_bus_remove+0x78/0x140 [libnvdimm] device_remove+0x70/0xd0 Another issue is that if there is no altmap, a PMD-sized vmemmap page will be allocated from RAM, regardless of the alignment of the section start address. If the section start address is not aligned to the PMD size, a VM_BUG_ON will be triggered when setting the PMD-sized page to page table. In this patch, we are aligning the section vmemmap start address to PAGE_SIZE. After alignment, the start address will not be part of the current namespace, and a normal page will be allocated for the vmemmap mapping of the current section. For the remaining sections, altmaps will be allocated. During the free operation, the normal page will be correctly freed. In the same way, a PMD_SIZE vmemmap page will be allocated only if the section start address is PMD_SIZE-aligned; otherwise, it will fall back to a PAGE-sized vmemmap allocation. Without this patch ================== NS1 start NS2 start _________________________________________________________ | NS1 | NS2 | --------------------------------------------------------- | Altmap| Altmap | .....|Altmap| Altmap | ........... | NS1 | NS1 ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot Update chip data using dev_get_drvdata(dev->parent) to fix NULL pointer deref in acp_i2s_set_tdm_slot.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access.Show less

In the Linux kernel, the following vulnerability has been resolved: ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr() As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI pointer values"), we need to perform a null pointer check on the return value of ice_get_vf_vsi() before using it.Show less

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations On Adva boards, SMA sysfs store/get operations can call __handle_signal_outputs() or __handle_signal_inputs() while the `irig` and `dcf` pointers are uninitialized, leading to a NULL pointer dereference in __handle_signal() and causing a kernel crash. Adva boards don't use `irig` or `dcf` functionality, so add Adva-specific callbacks `ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that avoid invoking `irig` or `dcf` input/output routines.Show less

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix two issues in iommu_copy_struct_from_user() In the review for iommu_copy_struct_to_user() helper, Matt pointed out that a NULL pointer should be rejected prior to dereferencing it: https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com And Alok pointed out a typo at the same time: https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com Since both issues were copied from iommu_copy_struct_from_user(), fix them first in the current header.Show less

In the Linux kernel, the following vulnerability has been resolved: net: use sock_gen_put() when sk_state is TCP_TIME_WAIT It is possible for a pointer of type struct inet_timewait_sock to be returned from the functions __inet_lookup_established() and __inet6_lookup_established(). This can cause a crash when the returned pointer is of type struct inet_timewait_sock and sock_put() is called on it. The following is a crash call stack that shows sk->sk_wmem_alloc being accessed in sk_free() during the call to sock_put() on a struct inet_timewait_sock pointer. To avoid this issue, use sock_gen_put() instead of sock_put() when sk->sk_state is TCP_TIME_WAIT. mrdump.ko ipanic() + 120 vmlinux notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132 vmlinux atomic_notifier_call_chain(val=0) + 56 vmlinux panic() + 344 vmlinux add_taint() + 164 vmlinux end_report() + 136 vmlinux kasan_report(size=0) + 236 vmlinux report_tag_fault() + 16 vmlinux do_tag_recovery() + 16 vmlinux __do_kernel_fault() + 88 vmlinux do_bad_area() + 28 vmlinux do_tag_check_fault() + 60 vmlinux do_mem_abort() + 80 vmlinux el1_abort() + 56 vmlinux el1h_64_sync_handler() + 124 vmlinux > 0xFFFFFFC080011294() vmlinux __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C) vmlinux __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C) vmlinux arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8 vmlinux __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C, oldp=0) + 8 vmlinux __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8 vmlinux refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8 vmlinux sk_free(sk=0xF2FFFF82A8960700) + 28 vmlinux sock_put() + 48 vmlinux tcp6_check_fraglist_gro() + 236 vmlinux tcp6_gro_receive() + 624 vmlinux ipv6_gro_receive() + 912 vmlinux dev_gro_receive() + 1116 vmlinux napi_gro_receive() + 196 ccmni.ko ccmni_rx_callback() + 208 ccmni.ko ccmni_queue_recv_skb() + 388 ccci_dpmaif.ko dpmaif_rxq_push_thread() + 1088 vmlinux kthread() + 268 vmlinux 0xFFFFFFC08001F30C()Show less