NULL Pointer Dereference

[This CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] There are two issues related to the mapping of pages belonging to other domains: For one, an assertion is wrong there, where the case actually needs handling. A NULL pointer de-reference could result on a release build. This is CVE-2025-58144. And then the P2M lock isn't held until a page reference was actually obtained (or the attempt to do so has failed). Otherwise the page can not only change type, but even ownership in between, thus allowing domain boundaries to be violated. This is CVE-2025-58145.Show less

A denial-of-service security issue exists in the affected product and version. The security issue stems from the controller repeatedly attempting to forward messages. The issue could result in a major nonrecoverable fault on the controller.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list In shrink_folio_list(), the hwpoisoned folio may be large folio, which can't be handled by unmap_poisoned_folio(). For THP, try_to_unmap_one() must be passed with TTU_SPLIT_HUGE_PMD to split huge PMD first and then retry. Without TTU_SPLIT_HUGE_PMD, we will trigger null-ptr deref of pvmw.pte. Even we passed TTU_SPLIT_HUGE_PMD, we will trigger a WARN_ON_ONCE due to the page isn't in swapcache. Since UCE is rare in real world, and race with reclaimation is more rare, just skipping the hwpoisoned large folio is enough. memory_failure() will handle it if the UCE is triggered again. This happens when memory reclaim for large folio races with memory_failure(), and will lead to kernel panic. The race is as follows: cpu0 cpu1 shrink_folio_list memory_failure TestSetPageHWPoison unmap_poisoned_folio --> trigger BUG_ON due to unmap_poisoned_folio couldn't handle large folio [tujinjiang@huawei.com: add comment to unmap_poisoned_folio()]Show less

In the Linux kernel, the following vulnerability has been resolved: media: venus: protect against spurious interrupts during probe Make sure the interrupt handler is initialized before the interrupt is registered. If the IRQ is registered before hfi_create(), it's possible that an interrupt fires before the handler setup is complete, leading to a NULL dereference. This error condition has been observed during system boot on Rb3Gen2.Show less

In the Linux kernel, the following vulnerability has been resolved: media: iris: Fix NULL pointer dereference A warning reported by smatch indicated a possible null pointer dereference where one of the arguments to API "iris_hfi_gen2_handle_system_error" could sometimes be null. To fix this, add a check to validate that the argument passed is not null before accessing its members.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check if hubbub is NULL in debugfs/amdgpu_dm_capabilities HUBBUB structure is not initialized on DCE hardware, so check if it is NULL to avoid null dereference while accessing amdgpu_dm_capabilities file in debugfs.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Destroy KFD debugfs after destroy KFD wq Since KFD proc content was moved to kernel debugfs, we can't destroy KFD debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line debugfs_remove_recursive(entry->proc_dentry); tries to remove /sys/kernel/debug/kfd/proc/<pid> while /sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel NULL pointer. (cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix a Null pointer dereference vulnerability [Why] A null pointer dereference vulnerability exists in the AMD display driver's (DC module) cleanup function dc_destruct(). When display control context (dc->ctx) construction fails (due to memory allocation failure), this pointer remains NULL. During subsequent error handling when dc_destruct() is called, there's no NULL check before dereferencing the perf_trace member (dc->ctx->perf_trace), causing a kernel null pointer dereference crash. [How] Check if dc->ctx is non-NULL before dereferencing. (Updated commit text and removed unnecessary error message) (cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404)Show less

In the Linux kernel, the following vulnerability has been resolved: net, hsr: reject HSR frame if skb can't hold tag Receiving HSR frame with insufficient space to hold HSR tag in the skb can result in a crash (kernel BUG): [ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1 [ 45.392559] ------------[ cut here ]------------ [ 45.392912] kernel BUG at net/core/skbuff.c:211! [ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef) [ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0 <snip registers, remove unreliable trace> [ 45.402911] Call Trace: [ 45.403105] <IRQ> [ 45.404470] skb_push+0xcd/0xf0 [ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0 [ 45.406513] br_forward_finish+0x128/0x260 [ 45.408483] __br_forward+0x42d/0x590 [ 45.409464] maybe_deliver+0x2eb/0x420 [ 45.409763] br_flood+0x174/0x4a0 [ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0 [ 45.411618] br_handle_frame+0xac3/0x1230 [ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0 [ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0 [ 45.424478] __netif_receive_skb+0x22/0x170 [ 45.424806] process_backlog+0x242/0x6d0 [ 45.425116] __napi_poll+0xbb/0x630 [ 45.425394] net_rx_action+0x4d1/0xcc0 [ 45.427613] handle_softirqs+0x1a4/0x580 [ 45.427926] do_softirq+0x74/0x90 [ 45.428196] </IRQ> This issue was found by syzkaller. The panic happens in br_dev_queue_push_xmit() once it receives a corrupted skb with ETH header already pushed in linear data. When it attempts the skb_push() call, there's not enough headroom and skb_push() panics. The corrupted skb is put on the queue by HSR layer, which makes a sequence of unintended transformations when it receives a specific corrupted HSR frame (with incomplete TAG). Fix it by dropping and consuming frames that are not long enough to contain both ethernet and hsr headers. Alternative fix would be to check for enough headroom before skb_push() in br_dev_queue_push_xmit(). In the reproducer, this is injected via AF_PACKET, but I don't easily see why it couldn't be sent over the wire from adjacent network. Further Details: In the reproducer, the following network interface chain is set up: ┌────────────────┐ ┌────────────────┐ │ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐ └────────────────┘ └────────────────┘ │ │ ┌──────┐ ├─┤ hsr0 ├───┐ │ └──────┘ │ ┌────────────────┐ ┌────────────────┐ │ │┌────────┐ │ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │ └────────────────┘ └────────────────┘ ┌┼ bridge │ ││ │ │└────────┘ │ ┌───────┐ │ │ ... ├──────┘ └───────┘ To trigger the events leading up to crash, reproducer sends a corrupted HSR fr ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: prevent NULL deref in iova_to_phys The riscv_iommu_pte_fetch() function returns either NULL for unmapped/never-mapped iova, or a valid leaf pte pointer that requires no further validation. riscv_iommu_iova_to_phys() failed to handle NULL returns. Prevent null pointer dereference in riscv_iommu_iova_to_phys(), and remove the pte validation.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix SCCB present check Tracing code called by the SCLP interrupt handler contains early exits if the SCCB address associated with an interrupt is NULL. This check is performed after physical to virtual address translation. If the kernel identity mapping does not start at address zero, the resulting virtual address is never zero, so that the NULL checks won't work. Subsequently this may result in incorrect accesses to the first page of the identity mapping. Fix this by introducing a function that handles the NULL case before address translation.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid a NULL pointer dereference [WHY] Although unlikely drm_atomic_get_new_connector_state() or drm_atomic_get_old_connector_state() can return NULL. [HOW] Check returns before dereference. (cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)Show less

In the Linux kernel, the following vulnerability has been resolved: smb: server: split ksmbd_rdma_stop_listening() out of ksmbd_rdma_destroy() We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()! Otherwise already existing connections try to use smb_direct_wq as a NULL pointer.Show less

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL If metric table address is not allocated, accessing metrics_bin will result in a NULL pointer dereference, so add a check.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: qla4xxx: Prevent a potential error pointer dereference The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error, but qla4xxx_ep_connect() returns error pointers. Propagating the error pointers will lead to an Oops in the caller, so change the error pointers to NULL.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix ESI null pointer dereference ESI/MSI is a performance optimization feature that provides dedicated interrupts per MCQ hardware queue. This is optional feature and UFS MCQ should work with and without ESI feature. Commit e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse") brings a regression in ESI (Enhanced System Interrupt) configuration that causes a null pointer dereference when Platform MSI allocation fails. The issue occurs in when platform_device_msi_init_and_alloc_irqs() in ufs_qcom_config_esi() fails (returns -EINVAL) but the current code uses __free() macro for automatic cleanup free MSI resources that were never successfully allocated. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 (P) platform_device_msi_free_irqs_all+0x1c/0x40 ufs_qcom_config_esi+0x1d0/0x220 [ufs_qcom] ufshcd_config_mcq+0x28/0x104 ufshcd_init+0xa3c/0xf40 ufshcd_pltfrm_init+0x504/0x7d4 ufs_qcom_probe+0x20/0x58 [ufs_qcom] Fix by restructuring the ESI configuration to try MSI allocation first, before any other resource allocation and instead use explicit cleanup instead of __free() macro to avoid cleanup of unallocated resources. Tested on SM8750 platform with MCQ enabled, both with and without Platform ESI support.Show less

In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Do not map lowcore with identity mapping Since the identity mapping is pinned to address zero the lowcore is always also mapped to address zero, this happens regardless of the relocate_lowcore command line option. If the option is specified the lowcore is mapped twice, instead of only once. This means that NULL pointer accesses will succeed instead of causing an exception (low address protection still applies, but covers only parts). To fix this never map the first two pages of physical memory with the identity mapping.Show less