Incomplete Cleanup

Incomplete Cleanup (CWE-459) in Elastic Cloud on Kubernetes (ECK) can lead to unauthorized access via Privilege Abuse (CAPEC-122). Authentication credentials persist after a cross-namespace association has been denied by RBAC enforcement, allowing a low-privileged tenant to retain unauthorized read access to the associated Elasticsearch cluster.Show less

multer is a middleware for handling multipart/form-data in Node.js. In version 2.2.0, when a disk-backed upload is aborted or truncated before the write stream finishes, multer's disk storage engine removes the visible file but does not close the underlying write file descriptor, leaving a deleted but still open descriptor. A remote attacker able to reach an upload route using the built-in disk storage can send repeated aborted or malformed multipart uploads, each one leaking a file descriptor and retaining disk blocks until the process exits, which can exhaust resources and cause a denial of service. The issue is fixed in multer 2.3.0, which closes the destination write stream on abnormal source termination and defers cleanup until the stream has closed. Upgrade to multer 2.3.0 to remediate.Show less

Incomplete cleanup in GetUserMedia in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium)Show less

Incomplete cleanup in SiteIsolation in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium)Show less

Rocq Prover does not restore the universe graph's copy of the universe checking flag when a module that locally disabled the check is closed. Local Unset Universe Checking inside a module is expected to last only until the module ends, and the global flag is restored, but the universe graph keeps its own copy which is left disabled. The two views then disagree: Test Universe Checking reports the check as enabled while the kernel continues to accept universe-inconsistent terms. With the constraint between two universes no longer enforced, Hurkens' paradox applies and yields a proof of False, from which any proposition follows. The proof uses no axioms, plugins or unsafe features once the module has closed, and Print Assumptions reports it as closed under the global context, so neither the assumption audit nor the flag query reflects the actual kernel state. No fix is available.Show less

A parser state isolation vulnerability in misp-stix could cause data from a previously processed STIX document to be retained and incorporated into the MISP event generated from a subsequent document when the same parser instance is reused. Several STIX 1 and STIX 2 parser components maintained per-document state that was not completely cleared between conversions. In the STIX 2 parser, galaxy and galaxy-cluster information, including custom galaxy clusters, could survive a parser reset and subsequently be associated with objects from another bundle. The STIX 1 parsers were affected by the same underlying state-management issue. Depending on the parser type, retained information could include galaxies, references, passive DNS bookkeeping, package titles, dates, and timestamps. As a result, parsing a second STIX package with an already-used parser could produce a MISP event containing information that was present only in the previously processed package. For example, a generated event could inherit passive DNS records from an earlier document, reference unrelated galaxy information, combine titles from different packages, or use timestamps originating from another conversion. The issue primarily affects applications using the misp-stix API directly and reusing parser instances across independent STIX documents. Normal conversion entry points that instantiate a new parser for each file are not affected by this particular reuse scenario. An attacker able to influence documents processed by such a long-lived parser could potentially cause information from one conversion to contaminate a subsequent MISP event. This can affect the integrity of generated threat intelligence, resulting in incorrect associations, misleading contextual information, or unrelated indicators being attributed to an event. In environments where consecutive documents have different access controls or distribution scopes, the retained state could additionally result in limited disclosure of information from a previously processed document. Successful exploitation depends on the consuming application reusing the same parser instance and on the ordering of processed documents, which increases attack complexity. No direct availability impact or code execution is involved.Show less

FUXA is a web-based Process Visualization (SCADA/HMI/Dashboard) software. Prior to 1.3.3, DELETE /api/roles removes role definitions through server/runtime/users/usrstorage.js but does not remove the deleted role identifier from each user's info.roles array or the runtime usersMap cache. If a permission configuration still references that identifier, an affected user can retain authorization rights that an administrator intended to revoke, causing residual privilege, inconsistent access-control state, and misleading audit results. This issue is fixed in version 1.3.3.Show less

ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a remote unauthenticated P2P peer can stall a Zebra node by racing an invalid block body against the valid canonical body for the same block header hash. ZIP-244 permits the attacker to mutate coinbase scriptSig authentication data while retaining the transaction identifiers, merkle root, and block header hash, so the poisoned body fails later commitment validation but shares the canonical hash. In zebra-state/src/service.rs, queue_and_commit_to_non_finalized_state recorded the hash in non_finalized_block_write_sent_hashes before contextual validation completed and did not remove it when the write task rejected the body. When the honest body later arrived, the cached hash caused KnownBlock::WriteChannel duplicate handling to suppress it, leaving the node stuck one height behind until restart or reorganization. This issue is fixed in version 4.5.0.Show less

ZEBRA is a Zcash node written entirely in Rust. Prior to 4.5.0, a natural or attacker-influenced chain fork can leave stale Sapling and Orchard note-commitment subtree roots in Zebra state. In zebra-state/src/service/non_finalized_state/chain.rs, Chain::pop_tip removed a reverted tip block but did not remove subtree entries whose end_height belonged to that block, unlike the cleanup performed by pop_root. When the winning fork later finalized, the abandoned branch's stale subtree data could be written to RocksDB and survive node restarts. The corrupted history can cause z_getsubtreesbyindex consumers such as lightwalletd and light wallets to receive incorrect subtree roots, producing wallet synchronization failures or incorrect wallet state and requiring a full state rebuild for recovery. This issue is fixed in version 4.5.0.Show less

Mattermost versions 10.11.x <= 10.11.20, 11.7.x <= 11.7.5 Mattermost fails to remove thread membership records when a user is removed from or leaves a team, which allows a previously removed user who is later re-invited to the team to view private channel thread root post content and metadata via the team threads API.. Mattermost Advisory ID: MMSA-2026-00682Show less

@fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1.Show less

The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning. There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker. The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback).Show less

Incomplete cleanup in some UEFI firmware for some Intel(R) reference platforms within UEFI may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (none) and availability (none) impacts.Show less

A security flaw has been discovered in poco-ai poco-agent up to 0.5.4. Affected is the function WorkspaceManager._setup_session_persistence of the file executor/app/core/workspace.py of the component Claude File Handler. The manipulation results in incomplete cleanup. The attack may be performed from remote. Attacks of this nature are highly complex. The exploitability is told to be difficult. The exploit has been released to the public and may be used for attacks.Show less

better-auth versions before 1.6.11 fail to delete cached sessions when removing users via admin, anonymous, or SCIM endpoints when secondaryStorage is configured and storeSessionInDatabase is false. Attackers can reuse deleted user session tokens to maintain authentication for up to seven days after account deletion.Show less

Xenstore, to have an up-to-date picture of the entire system, wants to know of domains appearing and disappearing. To make this more robust, a new XEN_DOMCTL_get_domain_state was introduced. The management of the bitmap underlying that operation is tied into the binding of the VIRQ_DOM_EXC virtual IRQ. Unfortunately an error path there would tear down the bitmap even in cases when it wasn't set up. Unprivileged domains can trigger that error path.Show less