Use After Free

In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.Show less

In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize volume label accesses Protect vol->volume_label with a mutex and snaphost the label before copy_to_user. This prevent a use-after-free when FS_IOC_SETFSLABEL replaces the vol->volume_label and FS_IOC_GETTSLABEL reads it concurrently.Show less

In the Linux kernel, the following vulnerability has been resolved: fbdev: omap2: fix use-after-free in omapfb_mmap omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that can lead to use-after-free: The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock), while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock. This allows concurrent execution. In omapfb_mmap(): 1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref 2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region 3. len = fix->smem_len; // Read from NEW region 4. vm_iomap_memory(vma, start, len); // Map NEW region memory 5. atomic_inc(&rg->map_count); // Increment OLD region! Concurrently, OMAPFB_SETUP_PLANE can: - Reassign ofbi->region = new_rg - Update fix->smem_len - OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it This leaves userspace with a mapping to freed physical memory. The fix is to read all required values (start, len) from the same region reference (rg) that will have its map_count incremented, preventing the region from being freed while still mapped.Show less

In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of key in del_async path In tcp_ao_delete_key(), the del_async path skips the current_key and rnext_key validity checks present in the synchronous path, assuming these pointers are always NULL on LISTEN sockets. However, if a key was added with set_current=1/set_rnext=1 while the socket was in CLOSE state, current_key and rnext_key will be non-NULL after listen() transitions the socket to LISTEN. When such a key is deleted with del_async=1, hlist_del_rcu() and call_rcu() free the key without clearing the dangling pointers. After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences current_key->sndid and rnext_key->rcvid from freed slab memory. Clear current_key and rnext_key in the del_async path when they reference the key being deleted.Show less

In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before replacing page cache folio fuse_try_move_folio() unlocks the request on entry but does not re-lock it on the success path. This means fuse_chan_abort() can end the request and free the fuse_io_args (eg fuse_readpages_end()) while the subsequent copy chain logic after fuse_try_move_folio() accesses the fuse_io_args, leading to use-after-free issues. Fix this by calling lock_request() before replace_page_cache_folio(). This ensures the request is locked on the success path which will prevent the fuse_io_args from being freed while the later copying logic runs, and also ensures that the ap->folios[i]->mapping is never null since ap->folios[i] will always point to the newfolio after replace_page_cache_folio().Show less

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails dw8250_probe() registers the 8250 port via serial8250_register_8250_port() and then, if the device has a clock, registers a clock notifier. If clk_notifier_register() fails, probe returns the error but leaves the 8250 port registered. The matching serial8250_unregister_port() lives in dw8250_remove(), which is not called when probe fails, so the port slot stays occupied until the device is rebound or the system is rebooted. The devm-allocated driver data is freed while the port still references it (via the saved private_data and serial_in/serial_out callbacks), so any access to that port slot before a rebind is a use-after-free hazard. Unregister the port on the clk_notifier_register() error path.Show less

In the Linux kernel, the following vulnerability has been resolved: virtiofs: fix UAF on submount umount iput() called from fuse_release_end() can Oops if the super block has already been destroyed. Normally this is prevented by waiting for num_waiting to go down to zero before commencing with super block shutdown. This only works, however, for the last submount instance, as the wait counter is per connection, not per superblock. Revert to using synchronous release requests for the auto_submounts case, which is virtiofs only at this time.Show less

YAML::Syck versions before 1.47 for Perl allow a heap use-after-free via an anchor name reused as an anchors-table key in syck_hdlr_add_anchor. In the bundled libsyck an anchor name allocated by syck_strndup is stored both as node->anchor, freed when the node is freed, and as the key in the parser's anchors table. Freeing the node frees the shared key, and a later anchor redefinition makes st_delete compare against the freed key, so st_strcmp reads freed heap memory. Anchors are a standard YAML feature and need no special flags, so this is reached on the default Load path. Any caller that runs Load or LoadFile on an untrusted document that redefines an anchor reaches the read of freed memory.Show less

YAML::Syck versions before 1.47 for Perl allow a use-after-free and double-free via an anchor node freed while still on the parser value stack. In the bundled libsyck, when an anchor name is redefined or removed, syck_hdlr_add_anchor and syck_hdlr_remove_anchor free the node stored under that name with syck_free_node. That node can still be live on the parser's value stack, so syck_hdlr_add_node reaches it again and frees it a second time. On a normal build the 48-byte node chunk is freed twice and the interpreter aborts. Anchors need no special flags, so this is reached on the default Load path, and a 7-byte document that redefines an anchor triggers it. Any caller that runs Load or LoadFile on an untrusted document that redefines an anchor mid-parse crashes the interpreter, a denial of service.Show less

Buffa is a pure-Rust Protocol Buffers implementation with first-class protobuf editions support. Prior to 0.7.0, a soundness bug in the OwnedView<V> type allowed safe Rust code to trigger a use-after-free: the OwnedView::decode constructor transmuted a borrowed slice to &'static [u8], and the Deref implementation exposed the promoted 'static lifetime on borrowed view fields (such as &'static str and &'static [u8]) to callers, so the borrow checker permitted those references to outlive the OwnedView; once the OwnedView was dropped and its backing buffer freed, the references became dangling, enabling memory corruption, information disclosure of freed heap contents, and cross-thread misuse without any unsafe code in the calling application. This issue is fixed in version 0.7.0.Show less

NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_ssi_module module. This vulnerability may exist when the Server-Side Includes (SSI), proxy_pass, and proxy_buffering off directives are configured. With this configuration, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to cause a use-after-free in the NGINX worker process. This issue may lead to limited modification of memory or a restart of the NGINX worker process. Impact: This vulnerability may allow remote attackers to have limited control to modify memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.Show less

ImageMagick before 7.1.2-26 and 6.9.13-51 contains a use-after-free vulnerability that occurs when freetype initialization fails: the method does not exit and continues to use memory that was already freed. This can be triggered during image processing and may lead to a denial of service.Show less

Use after free in UI in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)Show less

Use after free in Skia in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)Show less

Use after free in GPU in Google Chrome on Android prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)Show less

Use after free in Ozone in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical)Show less