Use After Free

In the Linux kernel, the following vulnerability has been resolved: veth: Fix use after free in XDP_REDIRECT Commit 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb") introduced a bug where it tried to use pskb_expand_head() if the headroom was less than XDP_PACKET_HEADROOM. This however uses kmalloc to expand the head, which will later allow consume_skb() to free the skb while is it still in use by AF_XDP. Previously if the headroom was less than XDP_PACKET_HEADROOM we continued on to allocate a new skb from pages so this restores that behavior. BUG: KASAN: use-after-free in __xsk_rcv+0x18d/0x2c0 Read of size 78 at addr ffff888976250154 by task napi/iconduit-g/148640 CPU: 5 PID: 148640 Comm: napi/iconduit-g Kdump: loaded Tainted: G O 6.1.4-cloudflare-kasan-2023.1.2 #1 Hardware name: Quanta Computer Inc. QuantaPlex T41S-2U/S2S-MB, BIOS S2S_3B10.03 06/21/2018 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? __xsk_rcv+0x18d/0x2c0 kasan_report+0xad/0x130 ? __xsk_rcv+0x18d/0x2c0 kasan_check_range+0x149/0x1a0 memcpy+0x20/0x60 __xsk_rcv+0x18d/0x2c0 __xsk_map_redirect+0x1f3/0x490 ? veth_xdp_rcv_skb+0x89c/0x1ba0 [veth] xdp_do_redirect+0x5ca/0xd60 veth_xdp_rcv_skb+0x935/0x1ba0 [veth] ? __netif_receive_skb_list_core+0x671/0x920 ? veth_xdp+0x670/0x670 [veth] veth_xdp_rcv+0x304/0xa20 [veth] ? do_xdp_generic+0x150/0x150 ? veth_xdp_rcv_one+0xde0/0xde0 [veth] ? _raw_spin_lock_bh+0xe0/0xe0 ? newidle_balance+0x887/0xe30 ? __perf_event_task_sched_in+0xdb/0x800 veth_poll+0x139/0x571 [veth] ? veth_xdp_rcv+0xa20/0xa20 [veth] ? _raw_spin_unlock+0x39/0x70 ? finish_task_switch.isra.0+0x17e/0x7d0 ? __switch_to+0x5cf/0x1070 ? __schedule+0x95b/0x2640 ? io_schedule_timeout+0x160/0x160 __napi_poll+0xa1/0x440 napi_threaded_poll+0x3d1/0x460 ? __napi_poll+0x440/0x440 ? __kthread_parkme+0xc6/0x1f0 ? __napi_poll+0x440/0x440 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 148640: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 skb_release_data+0x449/0x600 consume_skb+0x9f/0x1c0 veth_xdp_rcv_skb+0x89c/0x1ba0 [veth] veth_xdp_rcv+0x304/0xa20 [veth] veth_poll+0x139/0x571 [veth] __napi_poll+0xa1/0x440 napi_threaded_poll+0x3d1/0x460 kthread+0x2a2/0x340 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888976250000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 340 bytes inside of 2048-byte region [ffff888976250000, ffff888976250800) The buggy address belongs to the physical page: page:00000000ae18262a refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x976250 head:00000000ae18262a order:3 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004cf00 raw: 0000000000000000 0000000080080008 00000002ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888976250000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888976250080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888976250100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888976250180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888976250200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fbShow less

In the Linux kernel, the following vulnerability has been resolved: nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition This bug influences both st_nci_i2c_remove and st_nci_spi_remove. Take st_nci_i2c_remove as an example. In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work with llt_ndlc_sm_work. When it calls ndlc_recv or timeout handler, it will finally call schedule_work to start the work. When we call st_nci_i2c_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in ndlc_remove CPU0 CPU1 |llt_ndlc_sm_work st_nci_i2c_remove | ndlc_remove | st_nci_remove | nci_free_device| kfree(ndev) | //free ndlc->ndev | |llt_ndlc_rcv_queue |nci_recv_frame |//use ndlc->ndevShow less

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix UaF in listener shutdown As reported by Christoph after having refactored the passive socket initialization, the mptcp listener shutdown path is prone to an UaF issue. BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0 Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266 CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 kasan_check_range+0x14a/0x1a0 _raw_spin_lock_bh+0x73/0xe0 subflow_error_report+0x6d/0x110 sk_error_report+0x3b/0x190 tcp_disconnect+0x138c/0x1aa0 inet_child_forget+0x6f/0x2e0 inet_csk_listen_stop+0x209/0x1060 __mptcp_close_ssk+0x52d/0x610 mptcp_destroy_common+0x165/0x640 mptcp_destroy+0x13/0x80 __mptcp_destroy_sock+0xe7/0x270 __mptcp_close+0x70e/0x9b0 mptcp_close+0x2b/0x150 inet_release+0xe9/0x1f0 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The msk grace period can legitly expire in between the last reference count dropped in mptcp_subflow_queue_clean() and the later eventual access in inet_csk_listen_stop() After the previous patch we don't need anymore special-casing msk listener socket cleanup: the mptcp worker will process each of the unaccepted msk sockets. Just drop the now unnecessary code. Please note this commit depends on the two parent ones: mptcp: refactor passive socket initialization mptcp: use the workqueue to destroy unaccepted socketsShow less

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove another errant put in error path drm_gem_shmem_mmap() doesn't own reference in error code path, resulting in the dma-buf shmem GEM object getting prematurely freed leading to a later use-after-free.Show less

In the Linux kernel, the following vulnerability has been resolved: vp_vdpa: fix the crash in hot unplug with vp_vdpa While unplugging the vp_vdpa device, it triggers a kernel panic The root cause is: vdpa_mgmtdev_unregister() will accesses modern devices which will cause a use after free. So need to change the sequence in vp_vdpa_remove [ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014 [ 195.004012] #PF: supervisor read access in kernel mode [ 195.004486] #PF: error_code(0x0000) - not-present page [ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0 [ 195.005578] Oops: 0000 1 PREEMPT SMP PTI [ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1 [ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown [ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 195.008059] RIP: 0010:ioread8+0x31/0x80 [ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7 [ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292 [ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0 [ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014 [ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68 [ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120 [ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805 [ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000 [ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0 [ 195.015741] PKRU: 55555554 [ 195.016001] Call Trace: [ 195.016233] <TASK> [ 195.016434] vp_modern_get_status+0x12/0x20 [ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa] [ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa] [ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net] [ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net] [ 195.018618] virtio_dev_remove+0x3d/0x90 [ 195.018986] device_release_driver_internal+0x1aa/0x230 [ 195.019466] bus_remove_device+0xd8/0x150 [ 195.019841] device_del+0x18b/0x3f0 [ 195.020167] ? kernfs_find_ns+0x35/0xd0 [ 195.020526] device_unregister+0x13/0x60 [ 195.020894] unregister_virtio_device+0x11/0x20 [ 195.021311] device_release_driver_internal+0x1aa/0x230 [ 195.021790] bus_remove_device+0xd8/0x150 [ 195.022162] device_del+0x18b/0x3f0 [ 195.022487] device_unregister+0x13/0x60 [ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa] [ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa] [ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa] [ 195.024115] bus_for_each_dev+0x78/0xc0 [ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa] [ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa] [ 195.025353] pci_device_remove+0x36/0xa0 [ 195.025719] device_release_driver_internal+0x1aa/0x230 [ 195.026201] pci_stop_bus_device+0x6c/0x90 [ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20 [ 195.027039] disable_slot+0x49/0x90 [ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90 [ 195.027832] hotplug_event+0xea/0x210 [ 195.028171] ? hotplug_event+0x210/0x210 [ 195.028535] acpiphp_hotplug_notify+0x22/0x80 [ 195.028942] ? hotplug_event+0x210/0x210 [ 195.029303] acpi_device_hotplug+0x8a/0x1d0 [ 195.029690] acpi_hotplug_work_fn+0x1a/0x30 [ 195.030077] process_one_work+0x1e8/0x3c0 [ 195.030451] worker_thread+0x50/0x3b0 [ 195.030791] ? rescuer_thread+0x3a0/0x3a0 [ 195.031165] kthread+0xd9/0x100 [ 195.031459] ? kthread_complete_and_exit+0x20/0x20 [ 195.031899] ret_from_fork+0x22/0x30 [ 195.032233] </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix invalid address access in lookup_rec() when index is 0 KASAN reported follow problem: BUG: KASAN: use-after-free in lookup_rec Read of size 8 at addr ffff000199270ff0 by task modprobe CPU: 2 Comm: modprobe Call trace: kasan_report __asan_load8 lookup_rec ftrace_location arch_check_ftrace_location check_kprobe_address_safe register_kprobe When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a pg which is newly added to ftrace_pages_start in ftrace_process_locs(). Before the first pg->index++, index is 0 and accessing pg->records[-1].ip will cause this problem. Don't check the ip when pg->index is 0.Show less

In the Linux kernel, the following vulnerability has been resolved: mptcp: use the workqueue to destroy unaccepted sockets Christoph reported a UaF at token lookup time after having refactored the passive socket initialization part: BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260 Read of size 4 at addr ffff88810698d5b0 by task syz-executor653/3198 CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 __token_bucket_busy+0x253/0x260 mptcp_token_new_connect+0x13d/0x490 mptcp_connect+0x4ed/0x860 __inet_stream_connect+0x80e/0xd90 tcp_sendmsg_fastopen+0x3ce/0x710 mptcp_sendmsg+0xff1/0x1a20 inet_sendmsg+0x11d/0x140 __sys_sendto+0x405/0x490 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc We need to properly clean-up all the paired MPTCP-level resources and be sure to release the msk last, even when the unaccepted subflow is destroyed by the TCP internals via inet_child_forget(). We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra, explicitly checking that for the critical scenario: the closed subflow is the MPC one, the msk is not accepted and eventually going through full cleanup. With such change, __mptcp_destroy_sock() is always called on msk sockets, even on accepted ones. We don't need anymore to transiently drop one sk reference at msk clone time. Please note this commit depends on the parent one: mptcp: refactor passive socket initializationShow less

In the Linux kernel, the following vulnerability has been resolved: cifs: fix use-after-free bug in refresh_cache_worker() The UAF bug occurred because we were putting DFS root sessions in cifs_umount() while DFS cache refresher was being executed. Make DFS root sessions have same lifetime as DFS tcons so we can avoid the use-after-free bug is DFS cache refresher and other places that require IPCs to get new DFS referrals on. Also, get rid of mount group handling in DFS cache as we no longer need it. This fixes below use-after-free bug catched by KASAN [ 379.946955] BUG: KASAN: use-after-free in __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.947642] Read of size 8 at addr ffff888018f57030 by task kworker/u4:3/56 [ 379.948096] [ 379.948208] CPU: 0 PID: 56 Comm: kworker/u4:3 Not tainted 6.2.0-rc7-lku #23 [ 379.948661] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014 [ 379.949368] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 379.949942] Call Trace: [ 379.950113] <TASK> [ 379.950260] dump_stack_lvl+0x50/0x67 [ 379.950510] print_report+0x16a/0x48e [ 379.950759] ? __virt_addr_valid+0xd8/0x160 [ 379.951040] ? __phys_addr+0x41/0x80 [ 379.951285] kasan_report+0xdb/0x110 [ 379.951533] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952056] ? __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.952585] __refresh_tcon.isra.0+0x10b/0xc10 [cifs] [ 379.953096] ? __pfx___refresh_tcon.isra.0+0x10/0x10 [cifs] [ 379.953637] ? __pfx___mutex_lock+0x10/0x10 [ 379.953915] ? lock_release+0xb6/0x720 [ 379.954167] ? __pfx_lock_acquire+0x10/0x10 [ 379.954443] ? refresh_cache_worker+0x34e/0x6d0 [cifs] [ 379.954960] ? __pfx_wb_workfn+0x10/0x10 [ 379.955239] refresh_cache_worker+0x4ad/0x6d0 [cifs] [ 379.955755] ? __pfx_refresh_cache_worker+0x10/0x10 [cifs] [ 379.956323] ? __pfx_lock_acquired+0x10/0x10 [ 379.956615] ? read_word_at_a_time+0xe/0x20 [ 379.956898] ? lockdep_hardirqs_on_prepare+0x12/0x220 [ 379.957235] process_one_work+0x535/0x990 [ 379.957509] ? __pfx_process_one_work+0x10/0x10 [ 379.957812] ? lock_acquired+0xb7/0x5f0 [ 379.958069] ? __list_add_valid+0x37/0xd0 [ 379.958341] ? __list_add_valid+0x37/0xd0 [ 379.958611] worker_thread+0x8e/0x630 [ 379.958861] ? __pfx_worker_thread+0x10/0x10 [ 379.959148] kthread+0x17d/0x1b0 [ 379.959369] ? __pfx_kthread+0x10/0x10 [ 379.959630] ret_from_fork+0x2c/0x50 [ 379.959879] </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function When a reset notify IPC message is received, the ISR schedules a work function and passes the ISHTP device to it via a global pointer ishtp_dev. If ish_probe() fails, the devm-managed device resources including ishtp_dev are freed, but the work is not cancelled, causing a use-after-free when the work function tries to access ishtp_dev. Use devm_work_autocancel() instead, so that the work is automatically cancelled if probe fails.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Bad drive in topology results kernel crash When the SAS Transport Layer support is enabled and a device exposed to the OS by the driver fails INQUIRY commands, the driver frees up the memory allocated for an internal HBA port data structure. However, in some places, the reference to the freed memory is not cleared. When the firmware sends the Device Info change event for the same device again, the freed memory is accessed and that leads to memory corruption and OS crash.Show less

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class handling This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class handling. The issue occurs due to a time-of-check/time-of-use condition in hfsc_change_class() when working with certain child qdiscs like netem or codel. The vulnerability works as follows: 1. hfsc_change_class() checks if a class has packets (q.qlen != 0) 2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g., codel, netem) might drop packets and empty the queue 3. The code continues assuming the queue is still non-empty, adding the class to vttree 4. This breaks HFSC scheduler assumptions that only non-empty classes are in vttree 5. Later, when the class is destroyed, this can lead to a Use-After-Free The fix adds a second queue length check after qdisc_peek_len() to verify the queue wasn't emptied.Show less

Use-After-Free vulnerability exists in the SLDPRT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted SLDPRT file.Show less

Use After Free vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user process to perform valid GPU processing operations to gain access to already freed memory.This issue affects Bifrost GPU Kernel Driver: from r8p0 through r49p3, from r50p0 through r51p0; Valhall GPU Kernel Driver: from r19p0 through r49p3, from r50p0 through r53p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r49p3, from r50p0 through r53p0.Show less

Use After Free vulnerability in Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user process to perform improper GPU memory processing operations to gain access to already freed memory. This issue affects Valhall GPU Kernel Driver: from r29p0 through r49p3, from r50p0 through r53p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r49p3, from r50p0 through r53p0.Show less

IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1, and MQ Operator SC2 3.2.0 through 3.2.10  Client connecting to a MQ Queue Manager can cause a SIGSEGV in the AMQRMPPA channel process terminating it.Show less

In the Linux kernel, the following vulnerability has been resolved: net: sched: Fix use after free in red_enqueue() We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb len before calling child enqueue").Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flow rule object from commit path No need to postpone this to the commit release path, since no packets are walking over this object, this is accessed from control plane only. This helped uncovered UAF triggered by races with the netlink notifier.Show less

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)Show less

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix use-after-free for dynamic ftrace_ops KASAN reported a use-after-free with ftrace ops [1]. It was found from vmcore that perf had registered two ops with the same content successively, both dynamic. After unregistering the second ops, a use-after-free occurred. In ftrace_shutdown(), when the second ops is unregistered, the FTRACE_UPDATE_CALLS command is not set because there is another enabled ops with the same content. Also, both ops are dynamic and the ftrace callback function is ftrace_ops_list_func, so the FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value of 'command' will be 0 and ftrace_shutdown() will skip the rcu synchronization. However, ftrace may be activated. When the ops is released, another CPU may be accessing the ops. Add the missing synchronization to fix this problem. [1] BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468 CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132 show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b4/0x248 lib/dump_stack.c:118 print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387 __kasan_report mm/kasan/report.c:547 [inline] kasan_report+0x118/0x210 mm/kasan/report.c:564 check_memory_region_inline mm/kasan/generic.c:187 [inline] __asan_load8+0x98/0xc0 mm/kasan/generic.c:253 __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 ftrace_graph_call+0x0/0x4 __might_sleep+0x8/0x100 include/linux/perf_event.h:1170 __might_fault mm/memory.c:5183 [inline] __might_fault+0x58/0x70 mm/memory.c:5171 do_strncpy_from_user lib/strncpy_from_user.c:41 [inline] strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139 getname_flags+0xb0/0x31c fs/namei.c:149 getname+0x2c/0x40 fs/namei.c:209 [...] Allocated by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:479 [inline] __kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493 kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:675 [inline] perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 __arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723 [...] Freed by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track+0x24/0x34 mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358 __kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437 __kasan_slab_free mm/kasan/common.c:445 [inline] kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446 slab_free_hook mm/slub.c:1569 [inline] slab_free_freelist_hook mm/slub.c:1608 [inline] slab_free mm/slub.c:3179 [inline] kfree+0x12c/0xc10 mm/slub.c:4176 perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 [...]Show less

In the Linux kernel, the following vulnerability has been resolved: KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive. Not checking the active flag during refresh is particularly egregious, as KVM can end up with a valid, inactive cache, which can lead to a variety of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing an mmu_notifier invalidation due to the cache not being on the list of gfns to invalidate. Note, "active" needs to be set if and only if the cache is on the list of caches, i.e. is reachable via mmu_notifier events. If a relevant mmu_notifier event occurs while the cache is "active" but not on the list, KVM will not acquire the cache's lock and so will not serailize the mmu_notifier event with active users and/or kvm_gpc_refresh(). A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND can be exploited to trigger the bug. 1. Deactivate shinfo cache: kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO kvm_gpc_deactivate kvm_gpc_unmap gpc->valid = false gpc->khva = NULL gpc->active = false Result: active = false, valid = false 2. Cause cache refresh: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast kvm_gpc_check return -EWOULDBLOCK because !gpc->valid kvm_xen_set_evtchn_fast return -EWOULDBLOCK kvm_gpc_refresh hva_to_pfn_retry gpc->valid = true gpc->khva = not NULL Result: active = false, valid = true 3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl KVM_XEN_ATTR_TYPE_SHARED_INFO: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast read_lock gpc->lock kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO mutex_lock kvm->lock kvm_xen_shared_info_init kvm_gpc_activate gpc->khva = NULL kvm_gpc_check [ Check passes because gpc->valid is still true, even though gpc->khva is already NULL. ] shinfo = gpc->khva pending_bits = shinfo->evtchn_pending CRASH: test_and_set_bit(..., pending_bits)Show less