Use After Free

In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Prevent use-after-free from occurring after cdev removal Since thermal_debug_cdev_remove() does not run under cdev->lock, it can run in parallel with thermal_debug_cdev_state_update() and it may free the struct thermal_debugfs object used by the latter after it has been checked against NULL. If that happens, thermal_debug_cdev_state_update() will access memory that has been freed already causing the kernel to crash. Address this by using cdev->lock in thermal_debug_cdev_remove() around the cdev->debugfs value check (in case the same cdev is removed at the same time in two different threads) and its reset to NULL. Cc :6.8+ <stable@vger.kernel.org> # 6.8+Show less

In the Linux kernel, the following vulnerability has been resolved: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique(). Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain.Show less

In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in error path Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported a UAF in the tipc_buf_append() error path: BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 Read of size 8 at addr ffff88804d2a7c80 by task poc/8034 CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 Call Trace: <IRQ> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:377 print_report+0xc4/0x620 linux/mm/kasan/report.c:488 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026 skb_release_all linux/net/core/skbuff.c:1094 __kfree_skb linux/net/core/skbuff.c:1108 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144 kfree_skb linux/./include/linux/skbuff.h:1244 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254 dst_input linux/./include/net/dst.h:461 ip_rcv_finish linux/net/ipv4/ip_input.c:449 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576 napi_poll linux/net/core/dev.c:6645 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553 do_softirq linux/kernel/softirq.c:454 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441 </IRQ> <TASK> __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381 local_bh_enable linux/./include/linux/bottom_half.h:33 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378 dev_queue_xmit linux/./include/linux/netdevice.h:3169 neigh_hh_output linux/./include/net/neighbour.h:526 neigh_output linux/./include/net/neighbour.h:540 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235 __ip_finish_output linux/net/ipv4/ip_output.c:313 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323 NF_HOOK_COND linux/./include/linux/netfilter.h:303 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433 dst_output linux/./include/net/dst.h:451 ip_local_out linux/net/ipv4/ip_output.c:129 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850 sock_sendmsg_nosec linux/net/socket.c:730 __sock_sendmsg linux/net/socket.c:745 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191 __do_sys_sendto linux/net/socket.c:2203 __se_sys_sendto linux/net/socket.c:2199 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199 do_syscall_x64 linux/arch/x86/entry/common.c:52 do_syscall_ ---truncated---Show less

When NGINX Plus or NGINX OSS are configured to use the HTTP/3 QUIC module and the network infrastructure supports a Maximum Transmission Unit (MTU) of 4096 or greater without fragmentation, undisclosed QUIC packets can cause NGINX worker processes to leak previously freed memory.Show less

Incorrect access control in the account management function of web interface in Aten PE6208 2.3.228 and 2.4.232 allows remote authenticated users to alter user and administrator accounts credentials via HTTP POST request.Show less

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that.Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL.Show less

In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: disable timeout handling If a timeout is hit, it can result is incorrect data on the I2C bus and/or memory corruptions in the guest since the device can still be operating on the buffers it was given while the guest has freed them. Here is, for example, the start of a slub_debug splat which was triggered on the next transfer after one transfer was forced to timeout by setting a breakpoint in the backend (rust-vmm/vhost-device): BUG kmalloc-1k (Not tainted): Poison overwritten First byte 0x1 instead of 0x6b Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29 __kmalloc+0xc2/0x1c9 virtio_i2c_xfer+0x65/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29 kfree+0x1bd/0x1cc virtio_i2c_xfer+0x32e/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 There is no simple fix for this (the driver would have to always create bounce buffers and hold on to them until the device eventually returns the buffers), so just disable the timeout support for now.Show less

In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop.Show less

In the Linux kernel, the following vulnerability has been resolved: net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: kms: Clear the HVS FIFO commit pointer once done Commit 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a wait on the previous commit done on a given HVS FIFO. However, we never cleared that pointer once done. Since drm_crtc_commit_put can free the drm_crtc_commit structure directly if we were the last user, this means that it can lead to a use-after free if we were to duplicate the state, and that stale pointer would even be copied to the new state. Set the pointer to NULL once we're done with the wait so that we don't carry over a pointer to a free'd structure.Show less

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix use-after-free and memleak on unbind Deregister the port when unbinding the driver to prevent it from being used after releasing the driver data and leaking memory allocated by serial core.Show less

In the Linux kernel, the following vulnerability has been resolved: can: sja1000: fix use after free in ems_pcmcia_add_card() If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up.Show less

In the Linux kernel, the following vulnerability has been resolved: can: pch_can: pch_can_rx_normal: fix use after free After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue.Show less

In the Linux kernel, the following vulnerability has been resolved: ethtool: do not perform operations on net devices being unregistered There is a short period between a net device starts to be unregistered and when it is actually gone. In that time frame ethtool operations could still be performed, which might end up in unwanted or undefined behaviours[1]. Do not allow ethtool operations after a net device starts its unregistration. This patch targets the netlink part as the ioctl one isn't affected: the reference to the net device is taken and the operation is executed within an rtnl lock section and the net device won't be found after unregister. [1] For example adding Tx queues after unregister ends up in NULL pointer exceptions and UaFs, such as: BUG: KASAN: use-after-free in kobject_get+0x14/0x90 Read of size 1 at addr ffff88801961248c by task ethtool/755 CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014 Call Trace: dump_stack_lvl+0x57/0x72 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b kobject_get+0x14/0x90 kobject_add_internal+0x3d1/0x450 kobject_init_and_add+0xba/0xf0 netdev_queue_update_kobjects+0xcf/0x200 netif_set_real_num_tx_queues+0xb4/0x310 veth_set_channels+0x1c3/0x550 ethnl_set_channels+0x524/0x610Show less

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix use-after-free due to delegation race A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru. Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread. I suspect aba2072f4523 "nfsd: grant read delegations to clients holding writes" made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning.Show less

In the Linux kernel, the following vulnerability has been resolved: aio: fix use-after-free due to missing POLLFREE handling signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <ramjiyani@google.com> (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.Show less

In the Linux kernel, the following vulnerability has been resolved: iio: mma8452: Fix trigger reference couting The mma8452 driver directly assigns a trigger to the struct iio_dev. The IIO core when done using this trigger will call `iio_trigger_put()` to drop the reference count by 1. Without the matching `iio_trigger_get()` in the driver the reference count can reach 0 too early, the trigger gets freed while still in use and a use-after-free occurs. Fix this by getting a reference to the trigger before assigning it to the IIO device.Show less