Use After Free

In the Linux kernel, the following vulnerability has been resolved: drbd: Fix five use after free bugs in get_initial_state In get_initial_state, it calls notify_initial_state_done(skb,..) if cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(), the skb will be freed by nlmsg_free(skb). Then get_initial_state will goto out and the freed skb will be used by return value skb->len, which is a uaf bug. What's worse, the same problem goes even further: skb can also be freed in the notify_*_state_change -> notify_*_state calls below. Thus 4 additional uaf bugs happened. My patch lets the problem callee functions: notify_initial_state_done and notify_*_state_change return an error code if errors happen. So that the error codes could be propagated and the uaf bugs can be avoid. v2 reports a compilation warning. This v3 fixed this warning and built successfully in my local environment with no additional warnings. v2: https://lore.kernel.org/patchwork/patch/1435218/Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove() The function mpt3sas_transport_port_remove() called in _scsih_expander_node_remove() frees the port field of the sas_expander structure, leading to the following use-after-free splat from KASAN when the ioc_info() call following that function is executed (e.g. when doing rmmod of the driver module): [ 3479.371167] ================================================================== [ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531 [ 3479.393524] [ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436 [ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021 [ 3479.409263] Call Trace: [ 3479.411743] <TASK> [ 3479.413875] dump_stack_lvl+0x45/0x59 [ 3479.417582] print_address_description.constprop.0+0x1f/0x120 [ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.429469] kasan_report.cold+0x83/0xdf [ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas] [ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas] [ 3479.465529] ? down_write+0xde/0x150 [ 3479.470746] ? up_write+0x14d/0x460 [ 3479.475840] ? kernfs_find_ns+0x137/0x310 [ 3479.481438] pci_device_remove+0x65/0x110 [ 3479.487013] __device_release_driver+0x316/0x680 [ 3479.493180] driver_detach+0x1ec/0x2d0 [ 3479.498499] bus_remove_driver+0xe7/0x2d0 [ 3479.504081] pci_unregister_driver+0x26/0x250 [ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas] [ 3479.516144] __x64_sys_delete_module+0x2fd/0x510 [ 3479.522315] ? free_module+0xaa0/0xaa0 [ 3479.527593] ? __cond_resched+0x1c/0x90 [ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70 [ 3479.546161] ? trace_hardirqs_on+0x1c/0x110 [ 3479.551828] do_syscall_64+0x35/0x80 [ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3479.563402] RIP: 0033:0x7f1fc482483b ... [ 3479.943087] ================================================================== Fix this by introducing the local variable port_id to store the port ID value before executing mpt3sas_transport_port_remove(). This local variable is then used in the call to ioc_info() instead of dereferencing the freed port structure.Show less

In the Linux kernel, the following vulnerability has been resolved: lz4: fix LZ4_decompress_safe_partial read out of bound When partialDecoding, it is EOF if we've either filled the output buffer or can't proceed with reading an offset for following match. In some extreme corner cases when compressed data is suitably corrupted, UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial may lead to read out of bound problem during decoding. lz4 upstream has fixed it [2] and this issue has been disscussed here [3] before. current decompression routine was ported from lz4 v1.8.3, bumping lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd better fix it first. [1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/ [2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad# [3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/Show less

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix use-after-free bug for mm struct Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may represent the last reference held on the task mm. hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed before the final use in hfi1_release_user_pages(). A new task may allocate the mm structure while it is still being used, resulting in problems. One manifestation is corruption of the mmap_sem counter leading to a hang in down_write(). Another is corruption of an mm struct that is in use by another task.Show less

In the Linux kernel, the following vulnerability has been resolved: ice: arfs: fix use-after-free when freeing @rx_cpu_rmap The CI testing bots triggered the following splat: [ 718.203054] BUG: KASAN: use-after-free in free_irq_cpu_rmap+0x53/0x80 [ 718.206349] Read of size 4 at addr ffff8881bd127e00 by task sh/20834 [ 718.212852] CPU: 28 PID: 20834 Comm: sh Kdump: loaded Tainted: G S W IOE 5.17.0-rc8_nextqueue-devqueue-02643-g23f3121aca93 #1 [ 718.219695] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0012.070720200218 07/07/2020 [ 718.223418] Call Trace: [ 718.227139] [ 718.230783] dump_stack_lvl+0x33/0x42 [ 718.234431] print_address_description.constprop.9+0x21/0x170 [ 718.238177] ? free_irq_cpu_rmap+0x53/0x80 [ 718.241885] ? free_irq_cpu_rmap+0x53/0x80 [ 718.245539] kasan_report.cold.18+0x7f/0x11b [ 718.249197] ? free_irq_cpu_rmap+0x53/0x80 [ 718.252852] free_irq_cpu_rmap+0x53/0x80 [ 718.256471] ice_free_cpu_rx_rmap.part.11+0x37/0x50 [ice] [ 718.260174] ice_remove_arfs+0x5f/0x70 [ice] [ 718.263810] ice_rebuild_arfs+0x3b/0x70 [ice] [ 718.267419] ice_rebuild+0x39c/0xb60 [ice] [ 718.270974] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 718.274472] ? ice_init_phy_user_cfg+0x360/0x360 [ice] [ 718.278033] ? delay_tsc+0x4a/0xb0 [ 718.281513] ? preempt_count_sub+0x14/0xc0 [ 718.284984] ? delay_tsc+0x8f/0xb0 [ 718.288463] ice_do_reset+0x92/0xf0 [ice] [ 718.292014] ice_pci_err_resume+0x91/0xf0 [ice] [ 718.295561] pci_reset_function+0x53/0x80 <...> [ 718.393035] Allocated by task 690: [ 718.433497] Freed by task 20834: [ 718.495688] Last potentially related work creation: [ 718.568966] The buggy address belongs to the object at ffff8881bd127e00 which belongs to the cache kmalloc-96 of size 96 [ 718.574085] The buggy address is located 0 bytes inside of 96-byte region [ffff8881bd127e00, ffff8881bd127e60) [ 718.579265] The buggy address belongs to the page: [ 718.598905] Memory state around the buggy address: [ 718.601809] ffff8881bd127d00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 718.604796] ffff8881bd127d80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 718.607794] >ffff8881bd127e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 718.610811] ^ [ 718.613819] ffff8881bd127e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc [ 718.617107] ffff8881bd127f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc This is due to that free_irq_cpu_rmap() is always being called *after* (devm_)free_irq() and thus it tries to work with IRQ descs already freed. For example, on device reset the driver frees the rmap right before allocating a new one (the splat above). Make rmap creation and freeing function symmetrical with {request,free}_irq() calls i.e. do that on ifup/ifdown instead of device probe/remove/resume. These operations can be performed independently from the actual device aRFS configuration. Also, make sure ice_vsi_free_irq() clears IRQ affinity notifiers only when aRFS is disabled -- otherwise, CPU rmap sets and clears its own and they must not be touched manually.Show less

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: add flush_workqueue to prevent uaf Our detector found a concurrent use-after-free bug when detaching an NCI device. The main reason for this bug is the unexpected scheduling between the used delayed mechanism (timer and workqueue). The race can be demonstrated below: Thread-1 Thread-2 | nci_dev_up() | nci_open_device() | __nci_request(nci_reset_req) | nci_send_cmd | queue_work(cmd_work) nci_unregister_device() | nci_close_device() | ... del_timer_sync(cmd_timer)[1] | ... | Worker nci_free_device() | nci_cmd_work() kfree(ndev)[3] | mod_timer(cmd_timer)[2] In short, the cleanup routine thought that the cmd_timer has already been detached by [1] but the mod_timer can re-attach the timer [2], even it is already released [3], resulting in UAF. This UAF is easy to trigger, crash trace by POC is like below [ 66.703713] ================================================================== [ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490 [ 66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33 [ 66.703974] [ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5 [ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work [ 66.703974] Call Trace: [ 66.703974] <TASK> [ 66.703974] dump_stack_lvl+0x57/0x7d [ 66.703974] print_report.cold+0x5e/0x5db [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] kasan_report+0xbe/0x1c0 [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] enqueue_timer+0x448/0x490 [ 66.703974] __mod_timer+0x5e6/0xb80 [ 66.703974] ? mark_held_locks+0x9e/0xe0 [ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [ 66.703974] ? queue_work_on+0x61/0x80 [ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130 [ 66.703974] process_one_work+0x8bb/0x1510 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230 [ 66.703974] ? rwlock_bug.part.0+0x90/0x90 [ 66.703974] ? _raw_spin_lock_irq+0x41/0x50 [ 66.703974] worker_thread+0x575/0x1190 [ 66.703974] ? process_one_work+0x1510/0x1510 [ 66.703974] kthread+0x2a0/0x340 [ 66.703974] ? kthread_complete_and_exit+0x20/0x20 [ 66.703974] ret_from_fork+0x22/0x30 [ 66.703974] </TASK> [ 66.703974] [ 66.703974] Allocated by task 267: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] __kasan_kmalloc+0x81/0xa0 [ 66.703974] nci_allocate_device+0xd3/0x390 [ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0 [ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 66.703974] tty_ioctl+0x764/0x1310 [ 66.703974] __x64_sys_ioctl+0x122/0x190 [ 66.703974] do_syscall_64+0x3b/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 66.703974] [ 66.703974] Freed by task 406: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] kasan_set_track+0x21/0x30 [ 66.703974] kasan_set_free_info+0x20/0x30 [ 66.703974] __kasan_slab_free+0x108/0x170 [ 66.703974] kfree+0xb0/0x330 [ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0 [ 66.703974] nci_uart_tty_close+0xdf/0x180 [ 66.703974] tty_ldisc_kill+0x73/0x110 [ 66.703974] tty_ldisc_hangup+0x281/0x5b0 [ 66.703974] __tty_hangup.part.0+0x431/0x890 [ 66.703974] tty_release+0x3a8/0xc80 [ 66.703974] __fput+0x1f0/0x8c0 [ 66.703974] task_work_run+0xc9/0x170 [ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0 [ 66.703974] syscall_exit_to_user_mode+0x19/0x50 [ 66.703974] do_syscall_64+0x48/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0x ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcmu: Fix possible page UAF tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release().Show less

In the Linux kernel, the following vulnerability has been resolved: ep93xx: clock: Fix UAF in ep93xx_clk_register_gate() arch/arm/mach-ep93xx/clock.c:154:2: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc] arch/arm/mach-ep93xx/clock.c:151:2: note: Taking true branch if (IS_ERR(clk)) ^ arch/arm/mach-ep93xx/clock.c:152:3: note: Memory is released kfree(psc); ^~~~~~~~~~ arch/arm/mach-ep93xx/clock.c:154:2: note: Use of memory after it is freed return &psc->hw; ^ ~~~~~~~~Show less

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix use-after-free in jffs2_clear_xattr_subsystem When we mount a jffs2 image, assume that the first few blocks of the image are normal and contain at least one xattr-related inode, but the next block is abnormal. As a result, an error is returned in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then called in jffs2_build_filesystem() and then again in jffs2_do_fill_super(). Finally we can observe the following report: ================================================================== BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac Read of size 8 at addr ffff8881243384e0 by task mount/719 Call Trace: dump_stack+0x115/0x16b jffs2_clear_xattr_subsystem+0x95/0x6ac jffs2_do_fill_super+0x84f/0xc30 jffs2_fill_super+0x2ea/0x4c0 mtd_get_sb+0x254/0x400 mtd_get_sb_by_nr+0x4f/0xd0 get_tree_mtd+0x498/0x840 jffs2_get_tree+0x25/0x30 vfs_get_tree+0x8d/0x2e0 path_mount+0x50f/0x1e50 do_mount+0x107/0x130 __se_sys_mount+0x1c5/0x2f0 __x64_sys_mount+0xc7/0x160 do_syscall_64+0x45/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 719: kasan_save_stack+0x23/0x60 __kasan_kmalloc.constprop.0+0x10b/0x120 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x1c0/0x870 jffs2_alloc_xattr_ref+0x2f/0xa0 jffs2_scan_medium.cold+0x3713/0x4794 jffs2_do_mount_fs.cold+0xa7/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] Freed by task 719: kmem_cache_free+0xcc/0x7b0 jffs2_free_xattr_ref+0x78/0x98 jffs2_clear_xattr_subsystem+0xa1/0x6ac jffs2_do_mount_fs.cold+0x5e6/0x2253 jffs2_do_fill_super+0x383/0xc30 jffs2_fill_super+0x2ea/0x4c0 [...] The buggy address belongs to the object at ffff8881243384b8 which belongs to the cache jffs2_xattr_ref of size 48 The buggy address is located 40 bytes inside of 48-byte region [ffff8881243384b8, ffff8881243384e8) [...] ================================================================== The triggering of the BUG is shown in the following stack: ----------------------------------------------------------- jffs2_fill_super jffs2_do_fill_super jffs2_do_mount_fs jffs2_build_filesystem jffs2_scan_medium jffs2_scan_eraseblock <--- ERROR jffs2_clear_xattr_subsystem <--- free jffs2_clear_xattr_subsystem <--- free again ----------------------------------------------------------- An error is returned in jffs2_do_mount_fs(). If the error is returned by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to be executed. If the error is returned by jffs2_build_filesystem(), the jffs2_clear_xattr_subsystem() also does not need to be executed again. So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root' to fix this UAF problem.Show less

In the Linux kernel, the following vulnerability has been resolved: media: davinci: vpif: fix use-after-free on driver unbind The driver allocates and registers two platform device structures during probe, but the devices were never deregistered on driver unbind. This results in a use-after-free on driver unbind as the device structures were allocated using devres and would be freed by driver core when remove() returns. Fix this by adding the missing deregistration calls to the remove() callback and failing probe on registration errors. Note that the platform device structures must be freed using a proper release callback to avoid leaking associated resources like device names.Show less

In the Linux kernel, the following vulnerability has been resolved: Revert "Revert "block, bfq: honor already-setup queue merges"" A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41428cf ("block, bfq: reset last_bfqq_created on group change"). So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") out. This commit restores it. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503Show less

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Zap _all_ roots when unmapping gfn range in TDP MMU Zap both valid and invalid roots when zapping/unmapping a gfn range, as KVM must ensure it holds no references to the freed page after returning from the unmap operation. Most notably, the TDP MMU doesn't zap invalid roots in mmu_notifier callbacks. This leads to use-after-free and other issues if the mmu_notifier runs to completion while an invalid root zapper yields as KVM fails to honor the requirement that there must be _no_ references to the page after the mmu_notifier returns. The bug is most easily reproduced by hacking KVM to cause a collision between set_nx_huge_pages() and kvm_mmu_notifier_release(), but the bug exists between kvm_mmu_notifier_invalidate_range_start() and memslot updates as well. Invalidating a root ensures pages aren't accessible by the guest, and KVM won't read or write page data itself, but KVM will trigger e.g. kvm_set_pfn_dirty() when zapping SPTEs, and thus completing a zap of an invalid root _after_ the mmu_notifier returns is fatal. WARNING: CPU: 24 PID: 1496 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:173 [kvm] RIP: 0010:kvm_is_zone_device_pfn+0x96/0xa0 [kvm] Call Trace: <TASK> kvm_set_pfn_dirty+0xa8/0xe0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] __handle_changed_spte+0x2ab/0x5e0 [kvm] zap_gfn_range+0x1f3/0x310 [kvm] kvm_tdp_mmu_zap_invalidated_roots+0x50/0x90 [kvm] kvm_mmu_zap_all_fast+0x177/0x1a0 [kvm] set_nx_huge_pages+0xb4/0x190 [kvm] param_attr_store+0x70/0x100 module_attr_store+0x19/0x30 kernfs_fop_write_iter+0x119/0x1b0 new_sync_write+0x11c/0x1b0 vfs_write+0x1cc/0x270 ksys_write+0x5f/0xe0 do_syscall_64+0x38/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK>Show less

In the Linux kernel, the following vulnerability has been resolved: ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl Hulk Robot reported a KASAN report about use-after-free: ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160 Read of size 8 at addr ffff888035e37d98 by task ubiattach/1385 [...] Call Trace: klist_dec_and_del+0xa7/0x4a0 klist_put+0xc7/0x1a0 device_del+0x4d4/0xed0 cdev_device_del+0x1a/0x80 ubi_attach_mtd_dev+0x2951/0x34b0 [ubi] ctrl_cdev_ioctl+0x286/0x2f0 [ubi] Allocated by task 1414: device_add+0x60a/0x18b0 cdev_device_add+0x103/0x170 ubi_create_volume+0x1118/0x1a10 [ubi] ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi] Freed by task 1385: cdev_device_del+0x1a/0x80 ubi_remove_volume+0x438/0x6c0 [ubi] ubi_cdev_ioctl+0xbf4/0x1ba0 [ubi] [...] ================================================================== The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be concurrent. ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach. ubi_detach is bug-free because it uses reference counting to prevent concurrency. However, uif_init and uif_close in ubi_attach may race with ubi_cdev_ioctl. uif_init will race with ubi_cdev_ioctl as in the following stack. cpu1 cpu2 cpu3 _______________________|________________________|______________________ ctrl_cdev_ioctl ubi_attach_mtd_dev uif_init ubi_cdev_ioctl ubi_create_volume cdev_device_add ubi_add_volume // sysfs exist kill_volumes ubi_cdev_ioctl ubi_remove_volume cdev_device_del // first free ubi_free_volume cdev_del // double free cdev_device_del And uif_close will race with ubi_cdev_ioctl as in the following stack. cpu1 cpu2 cpu3 _______________________|________________________|______________________ ctrl_cdev_ioctl ubi_attach_mtd_dev uif_init ubi_cdev_ioctl ubi_create_volume cdev_device_add ubi_debugfs_init_dev //error goto out_uif; uif_close kill_volumes ubi_cdev_ioctl ubi_remove_volume cdev_device_del // first free ubi_free_volume // double free The cause of this problem is that commit 714fb87e8bc0 make device "available" before it becomes accessible via sysfs. Therefore, we roll back the modification. We will fix the race condition between ubi device creation and udev by removing ubi_get_device in vol_attribute_show and dev_attribute_show.This avoids accessing uninitialized ubi_devices[ubi_num]. ubi_get_device is used to prevent devices from being deleted during sysfs execution. However, now kernfs ensures that devices will not be deleted before all reference counting are released. The key process is shown in the following stack. device_del device_remove_attrs device_remove_groups sysfs_remove_groups sysfs_remove_group remove_files kernfs_remove_by_name kernfs_remove_by_name_ns __kernfs_remove kernfs_drainShow less

A use-after-free flaw was found in X.Org and Xwayland. When changing an alarm, the values of the change mask are evaluated one after the other, changing the trigger values as requested, and eventually, SyncInitTrigger() is called. If one of the changes triggers an error, the function will return early, not adding the new sync object, possibly causing a use-after-free when the alarm eventually triggers.Show less

A use-after-free flaw was found in X.Org and Xwayland. The root cursor is referenced in the X server as a global variable. If a client frees the root cursor, the internal reference points to freed memory and causes a use-after-free.Show less

In the Linux kernel, the following vulnerability has been resolved: IORING_OP_READ did not correctly consume the provided buffer list when read i/o returned < 0 (except for -EAGAIN and -EIOCBQUEUED return). This can lead to a potential use-after-free when the completion via io_rw_done runs at separate context.Show less