Use After Free

In the Linux kernel, the following vulnerability has been resolved: l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname A reader in l2tp_session_get_by_ifname() can return a pointer to a session whose refcount has reached zero. The getter takes its reference with plain refcount_inc(), but every other session getter in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the corresponding _get_next variants) uses refcount_inc_not_zero() because the IDR/RCU lookup can race with refcount_dec_and_test() -> l2tp_session_free() -> kfree_rcu(). The ifname getter is the only outlier; the inconsistency was raised on-list after 979c017803c4 ("l2tp: use list_del_rcu in l2tp_session_unhash"). A reader inside rcu_read_lock_bh() that matches session->ifname can be preempted between the strcmp() and the refcount_inc(). If the last reference drops on another CPU in that window, the reader's refcount_inc() runs on a counter that has reached zero. refcount_t catches the addition-on-zero, prints "refcount_t: addition on 0; use-after-free", saturates the counter, and returns the saturated pointer to the caller. Session memory is held live by the in-flight RCU read section, but the kfree_rcu() callback queued from l2tp_session_free() will free it once the grace period closes; a caller that dereferences the returned session past that point hits a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU sleeping lock and the preemption window is real; on stock PREEMPT kernels local_bh_disable() is a preempt_count increment that closes the cross-CPU race in practice (see below). Use refcount_inc_not_zero() and continue the list walk on failure, matching the other session getters in the file. The ifname getter is the only session getter in net/l2tp/ that still uses the bare refcount_inc() pattern; this change restores file-internal consistency. The success path is unchanged.Show less

In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts.Show less

In the Linux kernel, the following vulnerability has been resolved: dma-buf: fix UAF in dma_buf_fd() tracepoint Once FD_ADD() returns, the fd is live in the file descriptor table and a thread sharing that table can close() it before DMA_BUF_TRACE() runs. The close drops the last reference, __fput() frees the dma_buf, and the tracepoint then dereferences dmabuf to take dmabuf->name_lock -- slab-use-after-free. Split FD_ADD() back into get_unused_fd_flags() + fd_install() and emit the tracepoint between them. While the fdtable slot is reserved with a NULL file pointer, a racing close() returns -EBADF without entering __fput(), so the dma_buf stays alive across the trace. Same approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put() tracepoint"). This undoes the FD_ADD() conversion done in commit 34dfce523c90 ("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to hook the tracepoint safely.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Fix use-after-free in omap2430_probe() In omap2430_probe(), of_node_put(np) is called prematurely before the last access to np, leading to a use-after-free if the node's reference count drops to zero. Move the of_node_put() calls after the last use of np in both the success and error paths.Show less

In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated---Show less

In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: add skb_cow_data() before in-place crypto llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place. This is the same pattern used by: - ESP (net/ipv4/esp4.c, net/ipv6/esp6.c) - MACsec (drivers/net/macsec.c) - WireGuard (drivers/net/wireguard/receive.c) - TIPC (net/tipc/crypto.c) Without this guard, in-place crypto on shared skb data leads to: - Silent data corruption of other skb clones - Use-after-free when the crypto API scatterwalk writes through a page that has already been freed by another clone's kfree_skb() - Kernel crashes under concurrent 802.15.4 traffic with security enabled (KASAN/KMSAN reports slab-use-after-free) Found by 0sec (https://0sec.ai) using automated source analysis.Show less

In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.]Show less

In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim.Show less

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix use-after-free in gfs2_qd_dealloc gfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(), accesses the superblock object sdp through qd->qd_sbd after freeing qd. It does so to decrement sd_quota_count and wake up sd_kill_wait. However, by the time the RCU callback runs, gfs2_put_super() may have already freed sdp via free_sbd(). This can happen when gfs2_quota_cleanup() is called during unmount: it disposes of quota objects via call_rcu() and then waits on sd_kill_wait with a 60-second timeout. If the timeout expires, or if gfs2_gl_hash_clear() triggers additional qd_put() calls that schedule more RCU callbacks after the wait completes, gfs2_put_super() will proceed to free the superblock while RCU callbacks referencing it are still pending. Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensure all pending RCU callbacks (including gfs2_qd_dealloc) have completed before the superblock is freed.Show less

In the Linux kernel, the following vulnerability has been resolved: hdlc_ppp: sync per-proto timers before freeing hdlc state Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp registers a timer via timer_setup(). That struct ppp is the hdlc->state allocation, which detach_hdlc_protocol() frees with kfree() in both teardown paths: unregister_hdlc_device() and the re-attach inside attach_hdlc_protocol(). The ppp proto never registered a .detach callback, so detach_hdlc_protocol() performs no timer synchronization before the kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(), is partial (it does not wait for a running callback) and only runs on the ->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A ppp_timer callback already executing (blocked on ppp->lock) survives the kfree and then dereferences proto->state / ppp->lock in freed memory, leading to a use-after-free. Fix this by adding a .detach helper that calls timer_shutdown_sync() on every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev) before kfree(hdlc->state), so timer_shutdown_sync() now runs on both free paths. timer_shutdown_sync() is used instead of timer_delete_sync() because the keepalive path re-arms the timer through add_timer()/mod_timer() and shutdown blocks any re-activation during teardown. Initialize the per-protocol timers in ppp_ioctl() when the protocol is attached, and remove the now-redundant timer_setup() from ppp_start(), so that the timers are initialized exactly once at attach time and ppp_timer_release() never operates on uninitialized timer_list structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so struct ppp's protos[i].timer is uninitialized garbage until the first timer_setup(); without this init-at-attach, attaching the PPP protocol without ever bringing the device up would leave timer_shutdown_sync() operating on uninitialized memory in .detach. Moving the init out of ppp_start() (which only runs on NETDEV_UP) into the attach path makes the initialization unconditional and avoids initializing the same timer_list twice. This bug was found by static analysis.Show less

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF in __blkcg_rstat_flush() When multiple blkgs in the same blkcg are released concurrently, a use-after-free can occur. The race happens when one blkg's __blkcg_rstat_flush() removes another blkg's iostat entries via llist_del_all(). The second blkg sees an empty list and proceeds to free itself while the first is still iterating over its entries. Move the flush from __blkg_release() (RCU callback) to blkg_release() (before call_rcu). This ensures the RCU grace period waits for any concurrent flush's rcu_read_lock() section to complete before freeing.Show less

In the Linux kernel, the following vulnerability has been resolved: tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to crypto_aead_decrypt(req) without taking a reference on the netns, unlike the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously (e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the per-netns tipc_crypto, and the completion then reads it: tipc_aead_decrypt_done() dereferences aead->crypto->stats and aead->crypto->net, and tipc_crypto_rcv_complete() dereferences aead->crypto->aead[] and the node table -- reading freed memory. Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436) This is the same class of bug that commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt side. The encrypt path takes maybe_get_net(aead->crypto->net) before crypto_aead_encrypt() and drops it with put_net() on the synchronous return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY return keeps the reference for the async callback to release. The decrypt path was left without the equivalent guard. Mirror the encrypt-side fix on the decrypt path: take a net reference before crypto_aead_decrypt() (failing with -ENODEV and the matching bearer put if it cannot be acquired), keep it across the -EINPROGRESS/-EBUSY async return, and drop it with put_net() on the synchronous success/error return and at the end of tipc_aead_decrypt_done(). Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is flooded with crafted encrypted frames from an unknown peer (driving the cluster-key decrypt path) while the bearer's netns is repeatedly torn down. The completion must run asynchronously to outlive tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts synchronously, so the async path was exercised via cryptd offload. The unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the unpatched upstream path; tipc_aead_decrypt() still lacks maybe_get_net(aead->crypto->net), so the completion can outlive the free on any config where crypto_aead_decrypt() goes async. Found by 0sec automated security-research tooling (https://0sec.ai).Show less

In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix use-after-free in pnfs_update_layout() When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(), the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds, pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(), which still references 'lo'. This results in a use-after-free when the tracepoint accesses lo's fields. Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo).Show less

In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix use-after-free on probe error path rpmsg_chrdev_probe() stores the newly allocated eptdev in the default endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while the default endpoint may still dispatch callbacks with the stale priv pointer. Avoid publishing eptdev through the default endpoint until rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv pointer is published should be ignored by rpmsg_ept_cb(). Flow-control updates can hit rpmsg_ept_flow_cb() in the same window, so make both callbacks return success when priv is NULL.Show less

In the Linux kernel, the following vulnerability has been resolved: 9p: avoid putting oldfid in p9_client_walk() error path When p9_client_walk() is called with clone set to false, fid aliases oldfid. If the walk subsequently fails after the request has been sent, the error path jumps to clunk_fid, which currently calls p9_fid_put(fid) unconditionally. This drops a reference to oldfid even though ownership of oldfid remains with the caller. If this is the last reference, oldfid can be clunked and destroyed while the caller still expects it to be valid. A later use or put of oldfid can then trigger a use-after-free or refcount underflow. Fix this by only putting fid in the clunk_fid error path when it does not alias oldfid, matching the existing guard in the error path below. This can be triggered when a multi-component walk is split into multiple p9_client_walk() calls and a later non-cloning walk fails. A reproducer and refcount warning logs are available on request.Show less

In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize volume label accesses Protect vol->volume_label with a mutex and snaphost the label before copy_to_user. This prevent a use-after-free when FS_IOC_SETFSLABEL replaces the vol->volume_label and FS_IOC_GETTSLABEL reads it concurrently.Show less

In the Linux kernel, the following vulnerability has been resolved: fbdev: omap2: fix use-after-free in omapfb_mmap omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that can lead to use-after-free: The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock), while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock. This allows concurrent execution. In omapfb_mmap(): 1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref 2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region 3. len = fix->smem_len; // Read from NEW region 4. vm_iomap_memory(vma, start, len); // Map NEW region memory 5. atomic_inc(&rg->map_count); // Increment OLD region! Concurrently, OMAPFB_SETUP_PLANE can: - Reassign ofbi->region = new_rg - Update fix->smem_len - OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it This leaves userspace with a mapping to freed physical memory. The fix is to read all required values (start, len) from the same region reference (rg) that will have its map_count incremented, preventing the region from being freed while still mapped.Show less

In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp).Show less

In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of key in del_async path In tcp_ao_delete_key(), the del_async path skips the current_key and rnext_key validity checks present in the synchronous path, assuming these pointers are always NULL on LISTEN sockets. However, if a key was added with set_current=1/set_rnext=1 while the socket was in CLOSE state, current_key and rnext_key will be non-NULL after listen() transitions the socket to LISTEN. When such a key is deleted with del_async=1, hlist_del_rcu() and call_rcu() free the key without clearing the dangling pointers. After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences current_key->sndid and rnext_key->rcvid from freed slab memory. Clear current_key and rnext_key in the del_async path when they reference the key being deleted.Show less