Double Free

An issue in kamailio v.6.1.1 and before allows a remote attacker to cause a denial of service via the ims_registrar_pcscf module, specifically the pcscf_save_pending/save_pending path and security-agreement parsing in sec_agree.c:parse_sec_agree()Show less

A vulnerability was determined in valkey-io valkey 9.1.0. Impacted is the function moduleTimerHandler of the file src/module.c of the component Module Timer Subsystem. This manipulation causes double free. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: b349fe2821e3998534b1454c1b64a478daf8c6b7. To fix this issue, it is recommended to deploy a patch.Show less

A double-free vulnerability in the WatchGuard Fireware OS iked process allows a remote unauthenticated attacker to create a Denial of Service (DoS) condition in VPN processing by sending specially crafted network traffic.Show less

An unauthenticated client that can reach a MongoDB Connector for BI deployment configured with Kerberos authentication may cause mongosqld to terminate when a crafted authentication exchange encounters a specific GSSAPI error-handling condition. This can interrupt BI Connector availability until the process restarts.Show less

Issue summary: QUIC server may double free QRX (QUIC record layer RX) object when channel creation fails for initial packet. Impact summary: Double free leads to heap corruption, which typically results in termination of QUIC server process, leading to Denial of Service. There is so far no evidence that this double free is exploitable for remote code execution, thus it is considered highly improbable. CWE: CWE-415: Double Free Description: In order to validate initial packet, OpenSSL QUIC stack default packet handler (port_default_packet_handler()) creates a so-called QRX object. If the initial packet validates successfully with QRX object, the default packet handler proceeds to channel (connection object) creation. The QRX object used for packet validation is passed to port_bind_channel(), so it becomes part of the newly created connection. If port_bind_channel() fails, then it also frees the QRX object. Once port_bind_channel() returns, the port_default_packet_handler() detects the failure and proceeds to the error branch, where the same QRX object is freed for the second time. The failure in port_bind_channel() function can be induced with a relatively low effort by a malformed (non RFC 9000 compliant) INITIAL packet. If the packet carries DCID (destination connection ID) which is shorter than 8 bytes, then port_bind_channel() jumps to the error path after ossl_quic_lcidm_enrol_odcid() detects that the DCID has invalid length. FIPS impact: no The FIPS module is not affected, as the QUIC implementation is outside of the OpenSSL FIPS module boundary.Show less

In strongSwan before 6.0.7, identity parsing/cloning is mishandled. Parsed EAP-Identities that result in an empty but non-NULL encoding are not correctly cloned and trigger a double-free once the duplicates are destroyed.Show less

Software installed and run as a non-privileged user may conduct GPU system calls which cause GPU memory leaks and possible kernel heap corruption. Scenario caused by memory free paths not maintaining state data of upgraded higher order allocations. This could cause memory leak or double free event.Show less

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, rdpsnd_server_recv_formats in channels/rdpsnd/server/rdpsnd_main.c frees context->client_formats on a malformed Client Audio Formats PDU without clearing the owning pointer or num_client_formats. An authenticated RDP client can trigger an error such as a cbSize larger than the remaining record, leave the dangling pointer in the server context, and cause rdpsnd_server_context_free to free the same allocation again at session teardown. This reliably terminates the server and can create allocator-dependent heap corruption. This issue is fixed in version 3.28.0.Show less

In the Linux kernel, the following vulnerability has been resolved: dm_early_create: fix freeing used table on dm_resume failure If dm_resume fails, the kernel attempts to free table with dm_table_destroy, but the table was already instantiated with dm_swap_table. This commit skips the call to dm_table_destroy in this case.Show less

A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function frees the parsed controls array on the Session Tracking critical-control rejection path without clearing the SLAPI_REQCONTROLS pblock slot. Operation teardown then frees the same pointer again, causing a double-free. An unauthenticated remote attacker can trigger this with a single BIND request carrying a critical Session Tracking control, resulting in heap corruption and potential denial of service.Show less

The Realtek BEE Bluetooth HCI driver's send callback, bt_hci_bee_send() in drivers/bluetooth/hci/hci_bee.c, violated the bt_hci_driver_api buffer-ownership contract. That contract requires the driver to consume (unref) the transmit net_buf only on success; on an error return the host caller retains ownership and unrefs the buffer itself. The pre-fix code routed all error paths through a shared cleanup label that unconditionally called net_buf_unref(buf) before returning the error code. Because the host TX paths (in subsys/bluetooth/host/hci_core.c) unref the buffer again after send() returns an error, the buffer is freed twice: the driver returns it to its net_buf pool and the host then unrefs the already-freed buffer, corrupting the shared pool / underflowing the reference count (CWE-415). The same error branch additionally dereferenced buf->len inside a LOG_ERR call after the buffer had already been unref'd, a read of freed memory (CWE-416) that is compiled in at the default error log level. The failing edges are reached when the controller's host-to-controller buffer allocation fails or the controller send fails (resource-exhaustion / IO conditions). A remote Bluetooth peer can push the device toward these conditions indirectly by driving heavy host transmit activity, at which point the double-free corrupts the host net_buf pool and most likely crashes the device, with residual potential for further memory corruption. The impact is confined to builds using this specific Realtek BEE HCI driver. The fix returns early from each error path without unreffing and unrefs the buffer only on the success path, restoring the ownership contract and eliminating both the double-free and the use-after-free read.Show less

The Bluetooth HCI driver for Bouffalo Lab on-chip BLE controllers (BL60x/BL70x/BL61x), bt_bflb_send() in drivers/bluetooth/hci/hci_bflb.c, violates the bt_hci_driver_api.send() buffer-ownership contract. That contract (documented at include/zephyr/drivers/bluetooth.h) requires the buffer reference to be consumed only on success; on error the caller still owns the reference and unrefs it. The driver instead routed all error paths through a shared label that unconditionally called net_buf_unref(buf) before returning the error code, consuming the buffer on failure as well. When send() returns an error, the host TX path (send_buf() in subsys/bluetooth/host/conn.c) unrefs the same buffer again, believing it still owns it. This double-unref over-decrements the net_buf reference count. Because the buffer is a TX fragment whose destroy callback also decrements its still-queued parent buffer, the parent is freed prematurely while reachable on the connection TX queue, producing a use-after-free and corruption of the shared net_buf pool rather than a benign leak. The error conditions are on the host-to-controller transmit path (controller send failure, or an unsupported H:4 packet type), so they are not driven directly by attacker-supplied radio bytes; a remote/adjacent peer can influence them only indirectly, e.g. by inducing controller TX failures under heavy link load. The consequence when reached is BLE-stack denial of service (crash / pool corruption) with possible further memory corruption, bounded to devices using one of these Bouffalo Lab on-chip controllers.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: set new_stream to NULL after release In dm_update_crtc_state(), the skip_modeset path releases new_stream via dc_stream_release() but does not set the pointer to NULL. If a later error (e.g., color management failure) triggers the fail label, the error path calls dc_stream_release() again on the same dangling pointer, causing a double release and potential use-after-free. Fix this by setting new_stream to NULL after the initial release. (cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28)Show less

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: make release_scratchbuffers idempotent brcmf_pcie_release_scratchbuffers() frees the shared.scratch and shared.ringupd DMA buffers with dma_free_coherent() but does not clear the pointers afterwards, unlike the sibling release_ringbuffers() which NULLs commonrings/flowrings/idxbuf on release. Both the bus_reset .reset callback (brcmf_pcie_reset) and brcmf_pcie_remove() call release_scratchbuffers. When reset teardown has run before removal, remove's own teardown would call dma_free_coherent() a second time on the already-freed DMA allocation. NULL the pointers after free, matching release_ringbuffers(), so a later release observes that the allocation has already been released. This patch makes repeated sequential release safe; the reset-work lifetime is handled separately by the following patch. This issue was found by an in-house static analysis tool.Show less

A vulnerability in the zip archive parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper memory handling when processing content in zip files during scanning. An attacker could exploit this vulnerability by submitting a crafted zip file for scanning. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate as a result of a memory double-free, resulting in a DoS condition on the affected software.Show less

llama.cpp builds b1886 through b7445 contain a double free vulnerability in the LLaMA-Android JNI wrapper where new_1batch() allocates memory using malloc() while free_1batch() deallocates it using the C++ delete operator, causing heap metadata corruption. Attackers can trigger this memory management mismatch to cause denial of service through process crashes or potentially achieve arbitrary code execution depending on allocator state.Show less