Improper Handling of Highly Compressed Data (Data Amplification)

Versions of the package exifreader before 4.39.0 are vulnerable to Improper Handling of Highly Compressed Data (Data Amplification) due to decompressing PNG zTXt metadata without enforcing a built-in maximum decompressed output size. When asynchronous parsing is enabled, a crafted PNG file containing a highly compressed zTXt chunk can cause ExifReader to materialize a disproportionately large Comment value in memory.Show less

Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in ninenines cowlib allows unauthenticated remote denial of service via memory exhaustion. cow_spdy:inflate/2 in cowlib passes peer-supplied compressed bytes directly to zlib:inflate/2 with no output size bound. The SPDY header compression dictionary (?ZDICT) is public, and zlib compresses long runs of repeated bytes at roughly 1024:1, so a few kilobytes of SPDY frame payload can decompress to gigabytes on the BEAM heap, OOM-killing the node. A single unauthenticated SPDY frame is sufficient to trigger the condition. The parsers for syn_stream, syn_reply, and headers frame types are all affected via cow_spdy:parse_headers/2. This issue affects cowlib from 0.1.0 before 2.16.1.Show less

urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0.Show less

Audiobookshelf is a self-hosted audiobook and podcast server. Prior to 2.32.2, the POST /api/backups/upload endpoint decompresses the details entry from an uploaded .audiobookshelf ZIP file entirely into memory using zip.entryData(), with no limit on the decompressed size. The upload middleware also has no file size limit. An admin user can upload a crafted ZIP containing a highly compressed details entry that, when decompressed, consumes hundreds of megabytes or gigabytes of memory, crashing the server process via out-of-memory. This vulnerability is fixed in 2.32.2.Show less

Pillow is a Python imaging library. Versions 10.3.0 through 12.1.1 did not limit the amount of GZIP-compressed data read when decoding a FITS image, making them vulnerable to decompression bomb attacks. A specially crafted FITS file could cause unbounded memory consumption, leading to denial of service (OOM crash or severe performance degradation). If users are unable to immediately upgrade, they should only open specific image formats, excluding FITS, as a workaround.Show less

Tandoor Recipes is an application for managing recipes, planning meals, and building shopping lists. Prior to 2.6.5, a critical Denial of Service (DoS) vulnerability was in the recipe import functionality. This vulnerability allows an authenticated user to crash the server or make a significantly degrade its performance by uploading a large size ZIP file (ZIP Bomb). This vulnerability is fixed in 2.6.5.Show less

PraisonAI is a multi-agent teams system. Prior to 4.5.128, the _safe_extractall() function in PraisonAI's recipe registry validates archive members against path traversal attacks but performs no checks on individual member sizes, cumulative extracted size, or member count before calling tar.extractall(). An attacker can publish a malicious recipe bundle containing highly compressible data (e.g., 10GB of zeros compressing to ~10MB) that exhausts the victim's disk when pulled via LocalRegistry.pull() or HttpRegistry.pull(). This vulnerability is fixed in 4.5.128.Show less

Unfurl before 2026.04 contains an unbounded zlib decompression vulnerability in parse_compressed.py that allows remote attackers to cause denial of service. Attackers can submit highly compressed payloads via URL parameters to the /json/visjs endpoint that expand to gigabytes, exhausting server memory and crashing the service.Show less

JWCrypto implements JWK, JWS, and JWE specifications using python-cryptography. Prior to 1.5.7, an unauthenticated attacker can exhaust server memory by sending crafted JWE tokens with ZIP compression. The existing patch for CVE-2024-28102 limits input token size to 250KB but does not validate the decompressed output size. An unauthenticated attacker can cause memory exhaustion on memory-constrained systems. A token under the 250KB input limit can decompress to approximately 100MB. This vulnerability is fixed in 1.5.7.Show less

Mattermost versions 11.4.x <= 11.4.0, 11.3.x <= 11.3.1, 11.2.x <= 11.2.3, 10.11.x <= 10.11.11 fail to validate decompressed archive entry sizes during file extraction which allows authenticated users with file upload permissions to cause a denial of service via crafted zip archives containing highly compressed entries (zip bombs) that exhaust server memory.. Mattermost Advisory ID: MMSA-2026-00598Show less

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port.Show less

OpenClaw versions prior to 2026.3.2 contain an archive extraction vulnerability in the tar.bz2 installer path that bypasses safety checks enforced on other archive formats. Attackers can craft malicious tar.bz2 skill archives to bypass special-entry blocking and extracted-size guardrails, causing local denial of service during skill installation.Show less

A flaw was found in Keycloak. An unauthenticated remote attacker can trigger an application level Denial of Service (DoS) by sending a highly compressed SAMLRequest through the SAML Redirect Binding. The server fails to enforce size limits during DEFLATE decompression, leading to an OutOfMemoryError (OOM) and subsequent process termination. This vulnerability allows an attacker to disrupt the availability of the service.Show less

file-type detects the file type of a file, stream, or data. From 20.0.0 to 21.3.1, a crafted ZIP file can trigger excessive memory growth during type detection in file-type when using fileTypeFromBuffer(), fileTypeFromBlob(), or fileTypeFromFile(). The ZIP inflate output limit is enforced for stream-based detection, but not for known-size inputs. As a result, a small compressed ZIP can cause file-type to inflate and process a much larger payload while probing ZIP-based formats such as OOXML. This vulnerability is fixed in 21.3.2.Show less

Improper Handling of Highly Compressed Data (Compression Bomb) vulnerability in Erlang OTP ssh (ssh_transport modules) allows Denial of Service via Resource Depletion. The SSH transport layer advertises legacy zlib compression by default and inflates attacker-controlled payloads pre-authentication without any size limit, enabling reliable memory exhaustion DoS. Two compression algorithms are affected: * zlib: Activates immediately after key exchange, enabling unauthenticated attacks * zlib@openssh.com: Activates post-authentication, enabling authenticated attacks Each SSH packet can decompress ~255 MB from 256 KB of wire data (1029:1 amplification ratio). Multiple packets can rapidly exhaust available memory, causing OOM kills in memory-constrained environments. This vulnerability is associated with program files lib/ssh/src/ssh_transport.erl and program routines ssh_transport:decompress/2, ssh_transport:handle_packet_part/4. This issue affects OTP from OTP 17.0 before OTP 28.4.1, OTP 27.3.4.9 and OTP 26.2.5.18, corresponding to ssh from 3.0.1 before 5.5.1, 5.2.11.6 and 5.1.4.14.Show less

The undici WebSocket client is vulnerable to a denial-of-service attack via unbounded memory consumption during permessage-deflate decompression. When a WebSocket connection negotiates the permessage-deflate extension, the client decompresses incoming compressed frames without enforcing any limit on the decompressed data size. A malicious WebSocket server can send a small compressed frame (a "decompression bomb") that expands to an extremely large size in memory, causing the Node.js process to exhaust available memory and crash or become unresponsive. The vulnerability exists in the PerMessageDeflate.decompress() method, which accumulates all decompressed chunks in memory and concatenates them into a single Buffer without checking whether the total size exceeds a safe threshold.Show less

MarkUs is a web application for the submission and grading of student assignments. Prior to version 2.9.4, MarkUs currently extracts zip files without any size or entry-count limits. For example, instructors can upload a zip file to provide an assignment configuration; students can upload a zip file for an assignment submission and indicate its contents should be extracted. This issue has been patched in version 2.9.4.Show less

cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.35.0, cpp-httplib (httplib.h) does not enforce Server::set_payload_max_length() on the decompressed request body when using HandlerWithContentReader (streaming ContentReader) with Content-Encoding: gzip (or other supported encodings). A small compressed payload can expand beyond the configured payload limit and be processed by the application, enabling a payload size limit bypass and potential denial of service (CPU/memory exhaustion). This vulnerability is fixed in 0.35.0.Show less

psd-tools is a Python package for working with Adobe Photoshop PSD files. Prior to version 1.12.2, when a PSD file contains malformed RLE-compressed image data (e.g. a literal run that extends past the expected row size), decode_rle() raises ValueError which propagated all the way to the user, crashing psd.composite() and psd-tools export. decompress() already had a fallback that replaces failed channels with black pixels when result is None, but it never triggered because the ValueError from decode_rle() was not caught. The fix in version 1.12.2 wraps the decode_rle() call in a try/except so the existing fallback handles the error gracefully.Show less

NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. The WebSockets handling of NATS messages handles compressed messages via the WebSockets negotiated compression. Prior to versions 2.11.2 and 2.12.3, the implementation bound the memory size of a NATS message but did not independently bound the memory consumption of the memory stream when constructing a NATS message which might then fail validation for size reasons. An attacker can use a compression bomb to cause excessive memory consumption, often resulting in the operating system terminating the server process. The use of compression is negotiated before authentication, so this does not require valid NATS credentials to exploit. The fix, present in versions 2.11.2 and 2.12.3, was to bounds the decompression to fail once the message was too large, instead of continuing on. The vulnerability only affects deployments which use WebSockets and which expose the network port to untrusted end-points.Show less