Missing Release of Memory after Effective Lifetime

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(), which in a confidential VM allocates swiotlb bounce buffers. If the I/O submission fails in storvsc_do_io(), the I/O is typically retried by higher level code, but the bounce buffer memory is never freed. The mostly like cause of I/O submission failure is a full VMBus channel ring buffer, which is not uncommon under high I/O loads. Eventually enough bounce buffer memory leaks that the confidential VM can't do any I/O. The same problem can arise in a non-confidential VM with kernel boot parameter swiotlb=force. Fix this by doing scsi_dma_unmap() in the case of an I/O submission error, which frees the bounce buffer memory.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path of_icc_get() alloc resources for path1, we should release it when not need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1. Defer getting path1 to fix this. Patchwork: https://patchwork.freedesktop.org/patch/514264/Show less

In the Linux kernel, the following vulnerability has been resolved: ice: Fix potential memory leak in ice_gnss_tty_write() The ice_gnss_tty_write() return directly if the write_buf alloc failed, leaking the cmd_buf. Fix by free cmd_buf if write_buf alloc failed.Show less

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_erp: Fix object nesting warning ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: <TASK> __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370Show less

In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu().Show less

In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exit When a task is scheduled out, pending sigtrap deliveries are deferred to the target task upon resume to userspace via task_work. However failures while adding an event's callback to the task_work engine are ignored. And since the last call for events exit happen after task work is eventually closed, there is a small window during which pending sigtrap can be queued though ignored, leaking the event refcount addition such as in the following scenario: TASK A ----- do_exit() exit_task_work(tsk); <IRQ> perf_event_overflow() event->pending_sigtrap = pending_id; irq_work_queue(&event->pending_irq); </IRQ> =========> PREEMPTION: TASK A -> TASK B event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) // FAILS: task work has exited task_work_add(&event->pending_task) [...] <IRQ WORK> perf_pending_irq() // early return: event->oncpu = -1 </IRQ WORK> [...] =========> TASK B -> TASK A perf_event_exit_task(tsk) perf_event_exit_event() free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // leak event due to unexpected refcount == 2 As a result the event is never released while the task exits. Fix this with appropriate task_work_add()'s error handling.Show less

In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exec and file release The perf pending task work is never waited upon the matching event release. In the case of a child event, released via free_event() directly, this can potentially result in a leaked event, such as in the following scenario that doesn't even require a weak IRQ work implementation to trigger: schedule() prepare_task_switch() =======> <NMI> perf_event_overflow() event->pending_sigtrap = ... irq_work_queue(&event->pending_irq) <======= </NMI> perf_event_task_sched_out() event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) task_work_add(&event->pending_task) finish_lock_switch() =======> <IRQ> perf_pending_irq() //do nothing, rely on pending task work <======= </IRQ> begin_new_exec() perf_event_exit_task() perf_event_exit_event() // If is child event free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // event is leaked Similar scenarios can also happen with perf_event_remove_on_exec() or simply against concurrent perf_event_release(). Fix this with synchonizing against the possibly remaining pending task work while freeing the event, just like is done with remaining pending IRQ work. This means that the pending task callback neither need nor should hold a reference to the event, preventing it from ever beeing freed.Show less

In the Linux kernel, the following vulnerability has been resolved: block: initialize integrity buffer to zero before writing it to media Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix potential memory leak in the timestamp extension If fetching of userspace memory fails during the main loop, all drm sync objs looked up until that point will be leaked because of the missing drm_syncobj_put. Fix it by exporting and using a common cleanup helper. (cherry picked from commit 753ce4fea62182c77e1691ab4f9022008f25b62e)Show less

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix potential memory leak in the performance extension If fetching of userspace memory fails during the main loop, all drm sync objs looked up until that point will be leaked because of the missing drm_syncobj_put. Fix it by exporting and using a common cleanup helper. (cherry picked from commit 484de39fa5f5b7bd0c5f2e2c5265167250ef7501)Show less

llama.cpp provides LLM inference in C/C++. The unsafe `type` member in the `rpc_tensor` structure can cause `global-buffer-overflow`. This vulnerability may lead to memory data leakage. The vulnerability is fixed in b3561.Show less

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a possible leak when destroy a ctrl during qp establishment In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we know that a ctrl was allocated (in the admin connect request handler) and we need to release pending AERs, clear ctrl->sqs and sq->ctrl (for nvme-loop primarily), and drop the final reference on the ctrl. However, a small window is possible where nvmet_sq_destroy starts (as a result of the client giving up and disconnecting) concurrently with the nvme admin connect cmd (which may be in an early stage). But *before* kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq live reference). In this case, sq->ctrl was allocated however after it was captured in a local variable in nvmet_sq_destroy. This prevented the final reference drop on the ctrl. Solve this by re-capturing the sq->ctrl after all inflight request has completed, where for sure sq->ctrl reference is final, and move forward based on that. This issue was observed in an environment with many hosts connecting multiple ctrls simoutanuosly, creating a delay in allocating a ctrl leading up to this race window.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers register store validation for NFT_DATA_VALUE is conditional, however, the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This only requires a new helper function to infer the register type from the set datatype so this conditional check can be removed. Otherwise, pointer to chain object can be leaked through the registers.Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix quota root leak after quota disable failure If during the quota disable we fail when cleaning the quota tree or when deleting the root from the root tree, we jump to the 'out' label without ever dropping the reference on the quota root, resulting in a leak of the root since fs_info->quota_root is no longer pointing to the root (we have set it to NULL just before those steps). Fix this by always doing a btrfs_put_root() call under the 'out' label. This is a problem that exists since qgroups were first added in 2012 by commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but back then we missed a kfree on the quota root and free_extent_buffer() calls on its root and commit root nodes, since back then roots were not yet reference counted.Show less

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Add tx check to prevent skb leak Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.Show less

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix memory leak in audio daemon attach operation Audio PD daemon send the name as part of the init IOCTL call. This name needs to be copied to kernel for which memory is allocated. This memory is never freed which might result in memory leak. Free the memory when it is not needed.Show less

In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix task_struct reference leak During the execution of the following stress test with linux-rt: stress-ng --cyclic 30 --timeout 30 --minimize --quiet kmemleak frequently reported a memory leak concerning the task_struct: unreferenced object 0xffff8881305b8000 (size 16136): comm "stress-ng", pid 614, jiffies 4294883961 (age 286.412s) object hex dump (first 32 bytes): 02 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ debug hex dump (first 16 bytes): 53 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 S............... backtrace: [<00000000046b6790>] dup_task_struct+0x30/0x540 [<00000000c5ca0f0b>] copy_process+0x3d9/0x50e0 [<00000000ced59777>] kernel_clone+0xb0/0x770 [<00000000a50befdc>] __do_sys_clone+0xb6/0xf0 [<000000001dbf2008>] do_syscall_64+0x5d/0xf0 [<00000000552900ff>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 The issue occurs in start_dl_timer(), which increments the task_struct reference count and sets a timer. The timer callback, dl_task_timer, is supposed to decrement the reference count upon expiration. However, if enqueue_task_dl() is called before the timer expires and cancels it, the reference count is not decremented, leading to the leak. This patch fixes the reference leak by ensuring the task_struct reference count is properly decremented when the timer is canceled.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception() There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on s390. Therefore we do not expect to see VM_FAULT_HWPOISON in do_exception(). However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general"), it is possible to see VM_FAULT_HWPOISON in combination with PTE_MARKER_POISONED, even on architectures that do not support HWPOISON otherwise. In this case, we will end up on the BUG() in do_exception(). Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault flags, for easier debugging. Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot support swap entries on other levels than PTE level.Show less