Missing Release of Memory after Effective Lifetime

A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.Show less

When a canister method is called via ic_cdk::call* , a new Future CallFuture is created and can be awaited by the caller to get the execution result. Internally, the state of the Future is tracked and stored in a struct called CallFutureState. A bug in the polling implementation of the CallFuture allows multiple references to be held for this internal state and not all references were dropped before the Future is resolved. Since we have unaccounted references held, a copy of the internal state ended up being persisted in the canister's heap and thus causing a memory leak. Impact Canisters built in Rust with ic_cdk and ic_cdk_timers are affected. If these canisters call a canister method, use timers or heartbeat, they will likely leak a small amount of memory on every such operation. In the worst case, this could lead to heap memory exhaustion triggered by an attacker. Motoko based canisters are not affected by the bug. PatchesThe patch has been backported to all minor versions between >= 0.8.0, <= 0.15.0. The patched versions available are 0.8.2, 0.9.3, 0.10.1, 0.11.6, 0.12.2, 0.13.5, 0.14.1, 0.15.1 and their previous versions have been yanked. WorkaroundsThere are no known workarounds at the moment. Developers are recommended to upgrade their canister as soon as possible to the latest available patched version of ic_cdk to avoid running out of Wasm heap memory. Upgrading the canisters (without updating `ic_cdk`) also frees the leaked memory but it's only a temporary solution.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix missing workqueue destroy in xe_gt_pagefault On driver reload we never free up the memory for the pagefault and access counter workqueues. Add those destroy calls here. (cherry picked from commit 7586fc52b14e0b8edd0d1f8a434e0de2078b7b2b)Show less

In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount.Show less

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Prevent release of buffer in I/O When a task waiting for completion of a Store Data operation is interrupted, an attempt is made to halt this operation. If this attempt fails due to a hardware or firmware problem, there is a chance that the SCLP facility might store data into buffers referenced by the original operation at a later time. Handle this situation by not releasing the referenced data buffers if the halt attempt fails. For current use cases, this might result in a leak of few pages of memory in case of a rare hardware/firmware malfunction.Show less

In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leaks and crashes while performing a soft reset The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: use helper function to calculate expect ID Delete expectation path is missing a call to the nf_expect_get_id() helper function to calculate the expectation ID, otherwise LSB of the expectation object address is leaked to userspace.Show less

In the Linux kernel, the following vulnerability has been resolved: nvme: apple: fix device reference counting Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl. Split the allocation side out to make the error handling boundary easier to navigate. The apple driver had been doing this wrong, leaking the controller device memory on a tagset failure.Show less

In the Linux kernel, the following vulnerability has been resolved: nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memory leak during stateful obj update stateful objects can be updated from the control plane. The transaction logic allocates a temporary object for this purpose. The ->init function was called for this object, so plain kfree() leaks resources. We must call ->destroy function of the object. nft_obj_destroy does this, but it also decrements the module refcount, but the update path doesn't increment it. To avoid special-casing the update object release, do module_get for the update case too and release it via nft_obj_destroy().Show less

In the Linux kernel, the following vulnerability has been resolved: iio: adc: men_z188_adc: Fix a resource leak in an error handling path If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function.Show less

In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: fix memory leak in int3400_notify() It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly.Show less

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix connection leak There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable.Show less

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: lcd2s: Fix memory leak in ->remove() Once allocated the struct lcd2s_data is never freed. Fix the memory leak by switching to devm_kzalloc().Show less

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix I/O page table memory leak The current logic updates the I/O page table mode for the domain before calling the logic to free memory used for the page table. This results in IOMMU page table memory leak, and can be observed when launching VM w/ pass-through devices. Fix by freeing the memory used for page table before updating the mode.Show less

In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: add hash if ready poll request can't complete inline If we don't, then we may lose access to it completely, leading to a request leak. This will eventually stall the ring exit process as well.Show less

In the Linux kernel, the following vulnerability has been resolved: nommu: fix memory leak in do_mmap() error path The preallocation of the maple tree nodes may leak if the error path to "error_just_free" is taken. Fix this by moving the freeing of the maple tree nodes to a shared location for all error paths.Show less

In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: don't reissue in case of poll race on multishot request A previous commit fixed a poll race that can occur, but it's only applicable for multishot requests. For a multishot request, we can safely ignore a spurious wakeup, as we never leave the waitqueue to begin with. A blunt reissue of a multishot armed request can cause us to leak a buffer, if they are ring provided. While this seems like a bug in itself, it's not really defined behavior to reissue a multishot request directly. It's less efficient to do so as well, and not required to rearm anything like it is for singleshot poll requests.Show less

In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix pci device refcount leak As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(), pci_dev_put() is called to avoid leak.Show less