Missing Release of Memory after Effective Lifetime

A security vulnerability has been detected in GPAC up to 2.4.0. Affected by this issue is the function Media_GetSample of the file src/isomedia/media.c of the component MP4Box. Such manipulation of the argument cat leads to memory leak. The attack can only be performed from a local environment. The exploit has been disclosed publicly and may be used. The name of the patch is e79c5cbe8b3fed27f4854ec229457d30c96206f1. It is best practice to apply a patch to resolve this issue.Show less

In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path.Show less

In the Linux kernel, the following vulnerability has been resolved: mctp: i2c: fix skb memory leak in receive path When 'midev->allow_rx' is false, the newly allocated skb isn't consumed by netif_rx(), it needs to free the skb directly.Show less

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue entry from the queue data structures, taking ownership of the entry. For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN present but NFQA_VLAN_TCI missing), the function returns immediately without freeing the dequeued entry or its sk_buff. This leaks the nf_queue_entry, its associated sk_buff, and all held references (net_device refcounts, struct net refcount). Repeated triggering exhausts kernel memory. Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict on the error path, consistent with other error handling in this file.Show less

In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch.Show less

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime.Show less

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: Fix memory leak in error path In samsung_dsim_host_attach(), drm_bridge_add() is called to add the bridge. However, if samsung_dsim_register_te_irq() or pdata->host_ops->attach() fails afterwards, the function returns without removing the bridge, causing a memory leak. Fix this by adding proper error handling with goto labels to ensure drm_bridge_remove() is called in all error paths. Also ensure that samsung_dsim_unregister_te_irq() is called if the attach operation fails after the TE IRQ has been registered. samsung_dsim_unregister_te_irq() function is moved without changes to be before samsung_dsim_host_attach() to avoid forward declaration.Show less

In the Linux kernel, the following vulnerability has been resolved: drm/xe/sync: Fix user fence leak on alloc failure When dma_fence_chain_alloc() fails, properly release the user fence reference to prevent a memory leak. (cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0)Show less

In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit(). nfsd_nl_listener_set_doit() uses get_current_cred() without put_cred(). As we can see from other callers, svc_xprt_create_from_sa() does not require the extra refcount. nfsd_nl_listener_set_doit() is always in the process context, sendmsg(), and current->cred does not go away. Let's use current_cred() in nfsd_nl_listener_set_doit().Show less

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies() Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL, we're not freeing the chunk map that we've just looked up.Show less

In the Linux kernel, the following vulnerability has been resolved: net: mctp: fix device leak on probe failure Driver core holds a reference to the USB interface and its parent USB device while the interface is bound to a driver and there is no need to take additional references unless the structures are needed after disconnect. This driver takes a reference to the USB device during probe but does not to release it on probe failures. Drop the redundant device reference to fix the leak, reduce cargo culting, make it easier to spot drivers where an extra reference is needed, and reduce the risk of further memory leaks.Show less

In the Linux kernel, the following vulnerability has been resolved: net: ncsi: fix skb leak in error paths Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed.Show less

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', `macb_tx_poll()` incorrectly assumes there are no packets to handle because `queue->tx_head == queue->tx_tail`. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to `queue->tx_head` and `queue->tx_tail` are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trmShow less

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.Show less

In the Linux kernel, the following vulnerability has been resolved: most: core: fix leak on early registration failure A recent commit fixed a resource leak on early registration failures but for some reason left out the first error path which still leaks the resources associated with the interface. Fix up also the first error path so that the interface is always released on errors.Show less

In the Linux kernel, the following vulnerability has been resolved: drm: Account property blob allocations to memcg DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kernel memory growth without introducing additional policy or per-file limits.Show less

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: restore failed global reservations to subpool Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool") fixed an underflow error for hstate->resv_huge_pages caused by incorrectly attributing globally requested pages to the subpool's reservation. Unfortunately, this fix also introduced the opposite problem, which would leave spool->used_hpages elevated if the globally requested pages could not be acquired. This is because while a subpool's reserve pages only accounts for what is requested and allocated from the subpool, its "used" counter keeps track of what is consumed in total, both from the subpool and globally. Thus, we need to adjust spool->used_hpages in the other direction, and make sure that globally requested pages are uncharged from the subpool's used counter. Each failed allocation attempt increments the used_hpages counter by how many pages were requested from the global pool. Ultimately, this renders the subpool unusable, as used_hpages approaches the max limit. The issue can be reproduced as follows: 1. Allocate 4 hugetlb pages 2. Create a hugetlb mount with max=4, min=2 3. Consume 2 pages globally 4. Request 3 pages from the subpool (2 from subpool + 1 from global) 4.1 hugepage_subpool_get_pages(spool, 3) succeeds. used_hpages += 3 4.2 hugetlb_acct_memory(h, 1) fails: no global pages left used_hpages -= 2 5. Subpool now has used_hpages = 1, despite not being able to successfully allocate any hugepages. It believes it can now only allocate 3 more hugepages, not 4. With each failed allocation attempt incrementing the used counter, the subpool eventually reaches a point where its used counter equals its max counter. At that point, any future allocations that try to allocate hugeTLB pages from the subpool will fail, despite the subpool not having any of its hugeTLB pages consumed by any user. Once this happens, there is no way to make the subpool usable again, since there is no way to decrement the used counter as no process is really consuming the hugeTLB pages. The underflow issue that the original commit fixes still remains fixed as well. Without this fix, used_hpages would keep on leaking if hugetlb_acct_memory() fails.Show less