In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: fix bitmap leaks
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never fr...Show moreIn the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: CGX: fix bitmap leaks
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown.Show less |
In the Linux kernel, the following vulnerability has been resolved:
mux: mmio: fix regmap leak on probe failure
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed all...Show moreIn the Linux kernel, the following vulnerability has been resolved:
mux: mmio: fix regmap leak on probe failure
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.Show less |
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource tabl...Show moreIn the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash.Show less |
In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This l...Show moreIn the Linux kernel, the following vulnerability has been resolved:
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware.Show less |
In the Linux kernel, the following vulnerability has been resolved:
misc: ti_fpc202: fix a potential memory leak in probe function
Use for_each_child_of_node_scoped() to simplify the code and ensure the
device node ref...Show moreIn the Linux kernel, the following vulnerability has been resolved:
misc: ti_fpc202: fix a potential memory leak in probe function
Use for_each_child_of_node_scoped() to simplify the code and ensure the
device node reference is automatically released when the loop scope
ends.Show less |
In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leaks on common probe
Make sure to drop the reference taken when looking up the SMI device
during common probe on late pro...Show moreIn the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leaks on common probe
Make sure to drop the reference taken when looking up the SMI device
during common probe on late probe failure (e.g. probe deferral) and on
driver unbind.Show less |
In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe fa...Show moreIn the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind.Show less |
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()
Simplify the code by using device managed memory allocations.
This also fixes a memory le...Show moreIn the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a8671 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*").Show less |
In the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it...Show moreIn the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization.Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix memory leak of BO array in hang state
The hang state's BO array is allocated separately with kzalloc() in
vc4_save_hang_state() but never...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix memory leak of BO array in hang state
The hang state's BO array is allocated separately with kzalloc() in
vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the
missing kfree() for the BO array before freeing the hang state struct.Show less |
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix a memory leak in hang state error path
When vc4_save_hang_state() encounters an early return condition, it
returns without freeing the pr...Show moreIn the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix a memory leak in hang state error path
When vc4_save_hang_state() encounters an early return condition, it
returns without freeing the previously allocated `kernel_state`,
leaking memory.
Add the missing kfree() calls by consolidating the early return paths
into a single place.Show less |
In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e....Show moreIn the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path.Show less |
In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_mapping()
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set t...Show moreIn the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_mapping()
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables.Show less |
In the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct whi...Show moreIn the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF.Show less |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmwar...Show moreIn the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid.Show less |
In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation...Show moreIn the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5dce ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error.Show less |
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc(...Show moreIn the Linux kernel, the following vulnerability has been resolved:
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0.Show less |
An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by memory leaks from unauthenticated connections. |
In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak
__radix_tree_create() allocates and links intermediate nodes into the
tree o...Show moreIn the Linux kernel, the following vulnerability has been resolved:
net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak
__radix_tree_create() allocates and links intermediate nodes into the
tree one by one. If a subsequent allocation fails, the already-linked
nodes remain in the tree with no corresponding leaf entry. These orphaned
internal nodes are never reclaimed because radix_tree_for_each_slot()
only visits slots containing leaf values.
The radix_tree API is deprecated in favor of xarray. As suggested by
Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead
of fixing the radix_tree itself [1]. xarray properly handles cleanup of
internal nodes — xa_destroy() frees all internal xarray nodes when the
qrtr_node is released, preventing the leak.
[1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/Show less |
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be...Show moreIn the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails
When hci_cmd_sync_queue_once() returns with error, the destroy callback
will not be called.
Fix leaking references / memory on these failures.Show less |