Missing Release of Memory after Effective Lifetime

detect-character-encoding is a package for detecting character encoding using ICU. In detect-character-encoding v0.3.0 and earlier, allocated memory is not released. The problem has been patched in detect-character-encoding v0.3.1.Show less

In Eclipse Mosquitto version 1.6 to 2.0.10, if an authenticated client that had connected with MQTT v5 sent a crafted CONNECT message to the broker a memory leak would occur, which could be used to provide a DoS attack against the broker.Show less

Manage Engine Asset Explorer Agent 1.0.34 listens on port 9000 for incoming commands over HTTPS from Manage Engine Server. The HTTPS certificates are not verified which allows any arbitrary user on the network to send commands over port 9000. While these commands may not be executed (due to authtoken validation), the Asset Explorer agent will reach out to the manage engine server for an HTTP request. During this process, AEAgent.cpp allocates 0x66 bytes using "malloc". This memory is never free-ed in the program, causing a memory leak. Additionally, the instruction sent to aeagent (ie: NEWSCAN, DELTASCAN, etc) is converted to a unicode string, but is never freed. These memory leaks allow a remote attacker to exploit a Denial of Service scenario through repetitively sending these commands to an agent and eventually crashing it the agent due to an out-of-memory condition.Show less

A vulnerability in Juniper Networks Junos OS caused by Missing Release of Memory after Effective Lifetime leads to a memory leak each time the CLI command 'show system connections extensive' is executed. The amount of memory leaked on each execution depends on the number of TCP connections from and to the system. Repeated execution will cause more memory to leak and eventually daemons that need to allocate additionally memory and ultimately the kernel to crash, which will result in traffic loss. Continued execution of this command will cause a sustained Denial of Service (DoS) condition. An administrator can use the following CLI command to monitor for increase in memory consumption of the netstat process, if it exists: user@junos> show system processes extensive | match "username|netstat" PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND 21181 root 100 0 5458M 4913M CPU3 2 0:59 97.27% netstat The following log message might be observed if this issue happens: kernel: %KERN-3: pid 21181 (netstat), uid 0, was killed: out of swap space This issue affects Juniper Networks Junos OS 18.2 versions prior to 18.2R2-S8, 18.2R3-S7. 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2; This issue does not affect Juniper Networks Junos OS versions prior to 18.2R1.Show less

A missing release of memory after its effective lifetime vulnerability in the Webmail of FortiMail 6.4.0 through 6.4.4 and 6.2.0 through 6.2.6 may allow an unauthenticated remote attacker to exhaust available memory via specifically crafted login requests.Show less

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Show less

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Show less

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Show less

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Show less

There is a memory leak vulnerability in Huawei products. A resource management weakness exists in a module. Attackers with high privilege can exploit this vulnerability by performing some operations. This can lead to memory leak. Affected product versions include:IPS Module V500R005C00SPC100,V500R005C00SPC200;NGFW Module V500R005C00SPC100,V500R005C00SPC200;NIP6300 V500R005C00SPC100,V500R005C10SPC200;NIP6600 V500R005C00SPC100,V500R005C00SPC200;Secospace USG6300 V500R005C00SPC100,V500R005C00SPC200;Secospace USG6500 V500R005C00SPC100,V500R005C10SPC200;Secospace USG6600 V500R005C00SPC100,V500R005C00SPC200.Show less

Trusty contains a vulnerability in NVIDIA OTE protocol message parsing code, which is present in all the TAs. An incorrect bounds check can allow a local user through a malicious client to access memory from the heap in the TrustZone, which may lead to information disclosure.Show less